Life Span Flare User manual
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
FLARE OWNER’S MANUAL
2
FLARE
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 10
6. OPERATION GUIDE 12
7. EXERCISE GUIDE 22
8. MAINTENANCE INSTRUCTIONS 24
9. EXPLODED DIAGRAM 32
10. PARTS LIST 33
11. TROUBLE SHOOTING GUIDE 34
12. WARRANTY 36
3
FLARE
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
Place your unit on a solid, level surface when in use
When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged power cord or plug. When damaged, these must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
The treadmill is intended for in-home use only and not suitable for long term running.
4
FLARE
To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Use the handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Before undertaking any type of exercise program, it is recommended that you consult a doctor.
Injuries to health may result from incorrect or excessive training.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
WARNING heat rate monitoring systems may be inaccurate. If you feel faint stop exercising
immediately.
Children should not be allowed on or around the equipment, even when not in use.
Children should be supervised to ensure that they do not play with this machine
Loose-fitting clothing or jewellery that could become an entanglement hazard should not be worn.
Training shoes should be worn when using the equipment.
Equipment must be used on a level and stable surface.
All fixings should be checked before the equipment is used.
All literature relating to the use of the equipment should be retained for future reference.
Allowed operating temperature: 5-40°C
Remove the safety key after use to prevent unauthorized treadmill operation.
5
FLARE
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
Route the power cord away from any moving part of the treadmill including the elevation mechanism
and transport wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.
This is a high-power item; please do not share the same outlet with other high power machines such
as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure
the fuse is 10A.
3. IMPORTANT OPERATING INSTRUCTIONS
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
In order to prevent losing balance and suffering unexpected injury, never mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.
Replace any defective components immediately. The machine must be kept out of use until repaired.
6
FLARE
4. ASSEMBLY INSTRUCTIONS
PARTS LIST
NO.
DES.
Specification
Qty
NO.
DES.
Specification
Qty
1
Main frame
1
62
Bolt
M8*55
2
12
Allen Wrench
S=13\14\15mm
1
66
Bolt
M8*20
8
13
5#Allen Wrench
5mm
1
86
Lock washer
8
10
14
6#Allen Wrench
6mm
1
92
Screw
ST4.2*19
8
32
Left base cover
1
88
Screw
ST4.2*13
2
31
Right base cover
1
53
Standard Power Line
1
49
safe key
1
46
Oil Bottle
1
ASSEMBLY TOOLS:
5#ALLEN WRENCH 5mm x 1pc
Wrench with screw driver S=13, 14, 15 x 1pc
Note: Do not connect power before completing assembly
7
FLARE
STEP 1:
STEP 2:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame flat onto level
ground
1. Erect the computer frame (5), left upright
(3) and right upright (4) up as per the
illustration. Do not damage the computer
wire when folding the computer frame
2. Do not damage the upright cover during
the folding process
3. Secure the Computer frame to Left
Upright and Right Upright using Bolt
M8*20(66) and Lock washer (82). With
5#Allen Wrench(13)
8
FLARE
STEP 3:
STEP 4:
1. Move the upright covers to the to the
correct position as per the diagram
2. Secure the Computer frame to the Left
Upright and Right Upright using Bolt
M8*16(74) and Lock washer(86)
3. Use the Allen Wrench(12) to secure
bolt(88) to the upright cover. Secure
Screw(92) to upright cover inner hole
4. Note: Support the upright to prevent it
falling and causing injury
1. Using both hands, pivot the computer in
the direction of the arrows as shown on
the diagram.
9
FLARE
STEP 5:
STEP 6:
1. Use the 5# Allen wrench (13), Bolt M8*45
(62) and Lock washer (82) to secure the
Right Upright Tube (4) to the Main Frame.
2. Secure the Right Upright Tube (4) to the
Main Frame
3. Using the 5# Allen wrench (13), attach
Bolt M8*20 (66) and Lock nut(82) to the
base frame through the base and left
upright tube. Reference the diagram left.
4. The assembly procedure for the left side
is the same as the right.
5. Note: Support the upright to prevent it
falling and causing injury
1. Using Allen Wrench (12) and ST4.2*19
Bolt (88), attach the Right back cover (31)
and to the base frame and Left back
cover.
2. Repeat this assembly method for the
opposing side.
10
FLARE
STEP 7:
STEP 8:
1. Plug the power line (53) into the frame
socket.
1. Attach your safety key (49) to the
computer and start your exercise.
This manual suits for next models
1
Table of contents
Other Life Span Treadmill manuals
Life Span
Life Span GOLD 2.0 User manual
Life Span
Life Span CORSAIR FREERUN 200 User manual
Life Span
Life Span TR1200i User manual
Life Span
Life Span Jazz User manual
Life Span
Life Span TR1200iT User manual
Life Span
Life Span TR2000-HRC User manual
Life Span
Life Span TR3000i User manual
Life Span
Life Span Workplace DT-3 User manual
Life Span
Life Span SPIRIT User manual
Life Span
Life Span BOLT User manual
Life Span
Life Span Workplace DT-3 User manual
Life Span
Life Span TR7000iM User manual
Life Span
Life Span TURBO PLUS User manual
Life Span
Life Span STREAM User manual
Life Span
Life Span Relay User manual
Life Span
Life Span Treadmill User manual
Life Span
Life Span BOOMER User manual
Life Span
Life Span BALANCE User manual
Life Span
Life Span GOLD User manual
Life Span
Life Span STRIDE User manual
Popular Treadmill manuals by other brands
Smooth Fitness
Smooth Fitness EVO 3i user manual
NordicTrack
NordicTrack NETL81810.0 user manual
Schwinn
Schwinn 830/Journey 8.0 Assembly manual / owner's manual
Keys Fitness
Keys Fitness HealthTrainer HT-740T owner's manual
Spirit
Spirit XT8 Service manual
NordicTrack
NordicTrack T 14.0 Treadmill Manuel de l'utilisateur