Life Smart LS-Stealth-6FP User manual

Lifesmart Infrared Heater

User’s Manual

Model#:LS-Stealth-6FP

FOR INDOOR USE ONLY

120VAC 15 AMP DEDICATED CIRCUIT

The LIFESMART Infrared Heater works with your in‐home furnace to provide

supplement heat. Carefully and thoroughly read this manual before using the

LIFESMART Infrared Heater for the first time. We recommend keeping this manual

for regular review and future reference. This heater is intended for residential use.

Introduction

LIFESMART Infrared Heaters utilize the latest infrared heat technology. LIFESMART Infrared Heaters

provide a safe, convenient, clean, and economical way to distribute heat throughout your home or

business without producing deadly fumes or monoxide gases. Our heating system produces therapeutic

infrared heat that can potentially relieve symptoms of cardiovascular conditions and inflammatory

diseases. Infrared heat technology, in general, produces rays that are safe and highly beneficial to our

bodies and health professionals have been using infrared technology for decades to treat muscle and

joint pains.

LIFESMART Infrared Heaters are constructed of a wood housing. They are equipped with nylon caster

wheels for easy mobility. And the highly efficient filter can be maintained and cleaned by simply rinsing

with warm water.

Safety

USE CAUTION

Save these instructions because electrical safety is essential to keeping your home safe. When using an

electrical appliance, basic precautions should always be followed to reduce the risk of fire, electric shock,

and injury to persons. Please adhere to the following safety instructions:

The heater must be operated by an adult. Keep heater out of the reach of children.

Only operate the heater when it is on the floor.

Do not operate heater near any water.

Do not plug heater into any other cord connected device such as power strip, surge protector,

multiple outlet adapter, grounding adapter, outlet-type air fresheners or extension cords. Plug the

heater cord directly into a 3-prong 120V 15 amp grounded circuit receptacle.

Never plug heater cord into a loose fitting or broken receptacle.

Never alter the heater’s design or operation. Such actions will void warranty and could result in

injury and/or death.

Do not operate the heater if it has a damaged cord or plug.

Do not operate the heater if there are signs of malfunction. If the heater has been dropped or

damaged, do not operate.

Keep combustible materials such as furniture, pillows and other bedding materials, paper(s),

clothing, and curtains at least three feet away from all sides of the heater during operation.

Always unplug heater when not in use.

Do not use the heater outdoors.

Do not run heater cord under carpet. Do not cover cord with throw rugs, runners, or similar

coverings. Do not route cord under furniture or appliances. Route cord away from traffic areas.

Do not use the heater in bathrooms, laundry rooms, or similar indoor locations.

Turn off heater before unplugging.

Do not insert any foreign object or allow foreign object to enter the ventilation opening or

exhaust opening as this may cause electric shock, fire, and/or injury.

Never block the air intake or exhaust opening in any manner as this could lead to fire.

Do not locate heater, when in use, immediately below a receptacle.

IMPORTANT INSTRUCTIONS

Never operate heater in or around a bathtub, shower, or swimming pool.

Only open heater if instructed by an authorized representative of the manufacturer. There are

limited user-serviceable parts inside.

Use heater only as described in this manual. Any other use is not recommended by the

manufacturer as it may lead to fire, electric shock, and/or series physical injury or death.

Heater Specifications

LIFESMART Heater Model# LS-Stealth-6FP

Carton Size: 23.2in x 17.4 in x 21.7 in Thermostat: Electronic Analog

Heater Size: 20.9in L x 15in W x 18.3in H Fan System: Cross Flow Fan

Net Weight: 45.5 lbs Fan Noise Level: 46 db

Gross Weight: 49.5 lbs BTU: 5600

Cabinet: ¾ ply –Dark Oak Delayed Start Function

Power Cord: 5.8 ft / 16 gauge Remote Control

Heat Chamber with Diathermanous Copper Plate “HI” Function: 1500 watts

Heating Elements: 6 Infrared Quartz Bulbs w/ Nickel-Chrome Filament “LOW” Function: 1000 watts

Power Requirement: 120V 15 amp Washable Filter

Heating Elements Life Expectancy Potential: Rated 20,000 hrs Warranty: Limited 5-Year Parts Only

Heat Type: Therapeutic Quartz Infrared Heat

How It Works

The LIFESMART Infrared Heater works with your in-home furnace to provide supplement heat. In short,

room temperature air circulates from the rear of the LIFESMART Infrared Heater, passes through a

highly efficient filter, enters a chamber that houses the Infrared Quartz Bulbs, and exits as heated air

from the Diathermanous Copper Plate constructed on the front of the unit. The LIFESMART Infrared

Heater ideally heats a room of approximately 1000 unobstructed square feet, but can be used to heat up

a single room size up to 1800 square feet, depending on the ambient temperature. And it does all this

with a noise level below 46db. The LIFESMART Infrared Heater is not for use as the primary/sole

heating system.

Components and Functions

A. The LIFESMART Infrared Heater is constructed with Infrared Quartz Bulbs. Each Infrared Quartz

Bulb is rated at 250W. These bulbs produce therapeutic infrared rays that warm the air which

passes through the inner chamber. The Infrared Quartz Bulbs are constructed with a thermal

conducting housing. The incorporated twisted style on each bulb increases the efficiency of the

unit.

B. An AC Cross Flow Fan pushes air over these Infrared Quartz Bulbs. Cross Flow Fans create a

wide flow of air using a cylindrical-shaped impeller. Air is drawn inside the LIFESMART Infrared

Heater, flows along the circumference of the chamber and over the Infrared Quartz Bulbs, and is

blown out laterally creating a uniform flow of warm air.

C. The LIFESMART Infrared Heater has a Delay Start Function which controls the AC Cross Flow

Fan. The purpose of the Delay Start Function is to allow the Infrared Quartz Bulbs to heat up

before the fan begins to circulate the air flow. In addition, the AC Cross Flow Fan will continue to

circulate the airflow after the power is turned off to circulate the warm air from the LIFESMART

Infrared Heater cooling the unit down.

D. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature

and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it

simplifies and makes controlling the unit easy. Operating the heater is logical and can be done

on the unit itself or by remote.

E. The LED Digital Display is a convenient, stylish, and modern way to display the set temperature

and time. This attractive addition compliments the LIFESMART Infrared Heater, in that, it

simplifies and makes controlling the unit easy. Operating the heater is logical and can be done

on the unit itself or by remote.

F. The sleek, yet beautiful fireplace display is an added visual bonus with adjustable lighting that

adds ambience to any occasion.

Unpacking the LIFESMART Infrared Heater

1. First, check the carton to make sure there are no obvious damages that may have occurred

during shipment.

2. Open the LIFESMART Infrared Heater packaging and remove the heater by sliding it from the box.

You may want to gently and cautiously turn the entire box upside down letting the heater slowly

slide out.

3. Remove all the protective materials from the heater. It may be a good idea to keep the protective

materials and packaging for storage during the off-season.

Operating Instructions

Visually inspect the LIFESMART Infrared Heater for any damages before operation. Do not

operate the heater if any damages are detected. Contact your dealer immediately.

NOTE: “UP”and “DOWN”arrow buttons on the control panel and remote control have

dual function capabilities.

Adjust TIME / TEMP with up arrow or adjust HI / LOW settings.

Adjust TIME / TEMP with down arrow or adjust 0C/0F settings.

1) Plug the power cord directly into a conventional 120V 15 amp outlet and press the MASTER

POWER switch on the rear of the portable heater. Then press the POWER button on the front

control panel or on the remote to start the unit. The LED display will show the default value as

720F/220C.

(Note: If the ambient temperature (the temperature in the area around the heater) is greater than the set

temperature, the HI/LOW display, fan, and Quartz Bulbs will not operate.)

2) By pressing the 0C/0F/Down button, you can switch the temperature format from Fahrenheit to

Celsius and vice versa.

3) By pressing the TIME button, the LED display will switch from the temperature status to the TIME

status and begin to flash. The default time will display “--“. This means that the TIME is not

activated and, therefore, the heater will remain on. You must press the HI/LOW/UP button or the

0C/0F/DOWN once again within (5) seconds to set the time. Each time you press the HI/LOW/UP

button, the time will increase by 0.5 Hr. If you press the 0C/0F/DOWN button, the time will

decrease by 0.5 Hr. The maximum value for time is 8.0 Hr. By holding down the HI/LOW/UP

button or 0C/0F/DOWN for (2) seconds, the number rotation will cycle quicker. If you do not press

the HI/LOW/UP button or 0C/0F/DOWN within (5) seconds, the time status will switch back to the

temperature status.

Function Display

Press TIME to switch

to time status, then

press HI/LOW/UP

button once within 5

seconds to scroll up

Press the 0C/0F/Down to

switch from Fahrenheit

to Celsius.

4) Again, the default set temperature displayed on the LED display is 720F. By pressing the TEMP

button, the LED display will switch to the temperature status and flash. You must press the

HI/LOW/UP button or 0C/0F/DOWN button once again within (5) seconds to set the desired

temperature. Each time you press the HI/LOW/UP button, the temperature setting will increase

by 10F. Press the 0C/0F/DOWN button and the time will decrease by 10F. The maximum

temperature setting is 860F (300F). If you hold the HI/LOW/UP button or 0C/0F/DOWN button for

(2) seconds, the number rotation will cycle quicker.

5) Press the HI/LOW/UP button to switch from HI (rated at 1500W) to LOW (rated at 1000W). The

default setting is HI.

6) Easily manipulate the flame effect brightness by turning the FLAME knob clockwise for a brighter

effect or counterclockwise to or shut off the flame effect completely.

5 seconds later the

value switches to

ambient temperature

Press TEMP to switch

to temperature status,

then press HI/LOW/UP

button once within 5

seconds to scroll up

From HI to LOW

7) The LIFESMART Infrared Heater can be turned off by pressing the POWER button. DO NOT

TURN OFF THE MASTER POWER SWITCH ON THE REAR OF THE HEATER OR UNPLUG

THE HEATER UNTIL THE FAN SHUTS DOWN. If the heater is left on using the TIME function,

there will be (5) second sound alert to let you know that the time is expiring. If no actions are

taken, the heater will shut off.

8) Note that the temperature displayed on the heater may not always match the temperature

displayed on wall thermostats, thermometers, or other external temperature read-outs. This is

because the heater is often located near the floor, which allows for it to register the temperature

of the cooler air near and around the floor (warmer air rises up). It does not necessarily mean

your room is cooler or that the heater is not heating. If your heater’s display and your external

temperature read-out mechanism (thermometer, wall thermostat, etc.) are within a 5 to 6 degree

difference, it is completely normal.

Recommendations for Maximum Performance

1. Be sure not to place the heater in an area where there is too much cross air flow.

2. Direct the heater’s vent towards the center of the room and not towards a solid structure, like a

wall for example. For larger areas, place the heater in a centralized location.

3. The LIFESMART Infrared Heater is designed for maximum efficiency in the 680 F to 740F range.

4. Existing HVAC heating system vents should be closed. This allows the heater to function in an

isolated area.

5. It is not recommended to operate the heater in areas with non-insulated concrete or in structures

with metal walls.

6. If absolutely necessary to use on concrete floors, the floors should be covered to maintain the

heat within the room.

7. If the heater filters become dirty or dusty, they must be cleaned for the heater to operate at its

maximum efficiently.

Care, Maintenance, and Storage

Before care or maintenance is applied, always unplug the cord from the receptacle. The cabinet housing

can be wiped down with a slightly wet cloth or with non-corrosive, mild, furniture polish. The heater has a

washable filter. The filter should be cleaned or rinsed regularly to provide maximum performance. Once

the filter is removed, run warm water through and over the filter (a mild soap can be applied to assist in

removing dirt and dust). Dry the filter completely before re-installing into the heater.

If the heater is not to be used for an extended period of time, it can be stored away. Make sure the

power is turned off and the cord is unplugged from the receptacle. Wrap the cord around the handle on

the rear of the portable heater. Cover the heater to prevent dust from accumulating on the heater. You

may want to repack it back in its original carton. Always store the heater in a dry and dust free

environment.

(Note: You may want to clean the filter prior to storing the heater away so that it is ready for operation the

next time it is used.)

Troubleshooting

1. PROBLEM:

a. If the Heat Emitter is broken or damaged

b. If the Control Panel is not responding, the temperature reading is above 860F/300C, or there is a burning

odor coming from the portable heater

c. Or if the power cord is damaged

SOLUTION: Contact the manufacture immediately. DO NOT attempt to operate the portable heater as this may

cause electric shock, fire, and/or injury.

2. PROBLEM:

a. The amount of heated air exiting the front of the portable heater is reduced.

SOLUTION: Check the electrostatic filter to make sure it is free of dust and dirt. Also

check the front grill and rear air intake to make sure it is not being blocked by any kind of debris.

3. PROBLEM:

a. The heater will not turn on.

SOLUTION: First, test your outlet to make sure it has power. You can do this by plugging in another appliance

and turning the appliance on. Second, check the LED display to see if it is flashing. If this is the case, press

the POWER button to turn off the TIME and resume normal operation of the portable heater. Third, check the

power switch to see if it is lighting up. If the outlet does have power, the LED display is not flashing, or the

power switch is not lighting up, contact the manufacturer immediately for further troubleshooting.

4. PROBLEM:

a. The portable heater continues to operate even when the power switch is turned off.

SOLUTION: Do not unplug. The portable heater has a fan that will continue to operate even when the power

switch is turned off. This fan continues to run in order to cool down the portable heater. Once the fan stops

running, you can then unplug the portable heater.

5. PROBLEM:

a. The control panel displays no temperature or TIME.

SOLUTION: First, check to make sure the power cord is not damaged, is plugged in, and the outlet has power.

Second, check to make sure the control panel is not damaged. If the control panel display continues to be

inoperable, contact the manufacturer for further troubleshooting.

6. PROBLEM:

a. The control panel is displaying a temperature and TIME, but the heater does not operate.

SOLUTION: The Signal Cable or other relevant plugs may have become disconnected. Please contact the

manufacture for further troubleshooting.

7. PROBLEM:

a. The heat emitter is functioning and the air outflow is working, but the temperature displayed on the LED

panel does not increase.

SOLUTION: The temperature sensor may be damaged or has become disconnected. Please contact the

manufacturer immediately for further troubleshooting.

8. PROBLEM:

a. The display shows “Er”. This error code means the heating system is not working correctly.

SOLUTION: Contact the manufacturer immediately. DO NOT attempt to operate the portable heater as this may

cause electric shock, fire, and/or injury.

9. PROBLEM:

a. No simulated flame when you turn on the switch.

SOLUTION: Contact the manufacturer to rive the special screw at the base of the heater, then replace the bulb

with the working life of G9 halogen bulb.

Limited Manufacturer Warranty

5 Year Limited Parts Warranty: LIFESMART warrants this heater against defects in materials and

workmanship on functional parts, for a period of 5 years from the original date of purchase. Your sales

receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place

for future reference.

Manufacturer Warranty

All LIFESMART products are manufactured with the highest quality materials and are warranted to be

free from defects in material and workmanship at the time of purchase. This limited warranty applies to

products manufactured or distributed by the LIFESMART brand name, are delivered in the continental

United States, and extends to the original purchaser, or gift recipient. This warranty becomes valid at the

time of purchase and terminates either by the specified time frame listed above and/or owner transfer

(unless otherwise authorized by LIFESMART, as the manufacturer). Any extended warranties (warranties

that cover above and beyond this manufacturer warranty) that are sold through a retailer or third party, are

not directly correlated with this LIFESMART limited warranty, and may be redirected to said retailer or

third party for coverage.

Extent of Warranty

This warranty extends through the manufacturer of the product, and covers functional parts only.

Cosmetics are not covered, unless unequivocally determined it is a manufacturer/workmanship defect. Note

that surface cracks are not considered defects in material or workmanship, as they are normal characteristics

of all wood. Unless LIFESMART was the direct shipper, shipping damage should be addressed with the

shipping company, retailer, or place of purchase, prior to making a claim to LIFESMART, as the

manufacturer.

The manufacturer's sole obligation under this warranty shall be limited to furnishing the original purchaser

replacement parts for units deemed repairable by the LIFESMART warranty department. The purchaser

may also opt to ship the product to LIFESMART to have it repaired. The purchaser will be responsible to

prepay any shipping charges (both ways), export taxes, custom duties and taxes, or any other charges

associated with the transportation of the unit. In addition, the purchaser is responsible for insuring any parts

shipped or returned, if desired. For products the warranty department deems un-repairable, or discontinued,

LIFESMART reserves the right to issue a refurbished product, or product similar in size and functionality

as a replacement for the defective unit, if available. All exchanged parts and products replaced under this

warranty will become the property of LIFESMART.LIFESMART reserves the right to change

manufacturers of replacement parts or products for use, in order to cover any existing warranty. Any parts

determined defective may asked to be returned to LIFESMART or its representatives to validate a claim.

Any non-warranty/purchased replacement parts will be warranted for 30 days from the time the purchaser

receives them.

The purchaser must present LIFESMART with proof of purchase documents (including the date of

purchase) if requested. Any evidence of alteration, erasing, or forgery of proof of purchase documents will

be just cause to VOID this limited warranty. Products, in which the serial number has been defaced or

removed, are not eligible for warranty coverage.

Table of contents

Other Life Smart Heater manuals

Life Smart

Life Smart LS-PH08H Operator's manual

Life Smart

Life Smart LS-1000X-6W User manual

Life Smart

Life Smart HT1269UV User manual

Life Smart

Life Smart LS-PP1800-6WCH User manual

Life Smart

Life Smart MCHT1153US User manual

Life Smart

Life Smart L-SIFST-S Quick start guide

Life Smart

Life Smart S-1500-6WB operati Quick start guide

Life Smart

Life Smart LS-8WQH-DLX13B User manual

Life Smart

Life Smart HT1216 User manual

Life Smart

Life Smart HT1041 User manual

Life Smart

Life Smart R-HT1156 User manual

Life Smart

Life Smart LS‐Stealth‐6 User manual

Life Smart

Life Smart R-LS-W6-WIQH-M User manual

Life Smart

Life Smart LS?Stealth?4 User manual

Life Smart

Life Smart LS-8WIQH-DB Quick start guide

Life Smart

Life Smart LS1006HH13 Quick start guide

Life Smart

Life Smart LS-3W-BPIQT User manual

Life Smart

Life Smart S-LPHW-3 Guide

Life Smart

Life Smart LCHT0016US User manual

Life Smart

Life Smart HT1269 User manual

Life Smart

Life Smart R-LS-IRTWR-1 User manual

Life Smart

Life Smart LS1000HH13 Quick start guide

Life Smart

Life Smart Ultra LS1500-4WC User manual

Life Smart

Life Smart XXAC3004US User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide