Liene Pearl K100 User manual
1
Please read this user manual carefully before use and keep
it properly
User Manual for Pearl K100
Portable Photo Printer
User Manual 3
21
38
53
69
85
Benutzerhandbuch
Manuel de l'utilisateur
Manual de usuario
Manuale d'uso
ユーザーマニュアル
2
Product overview
Battery level
indicator
Paper tray cover
Paper outlet
USB-C charging
port
Status
indicator
Power
button
3
Photo paper slot
Reset button
Tip: When the machine is halted, press the
reset button with a pin to forcibly shut down.
Do not press the reset button when the printer
upgrades the rmware, so as to avoid damaging
the rmware and making the printer unusable.
Load photo paper
Open printer paper tray cover
Firmly press the paper tray cover to hear
a Click sound. The paper tray cover is in
place.
1
4
2
Unpack the paper and load the entire
pack into the printer, making sure that the
Smart Sheet is at the bottom and that the
barcode is bottommost and the glossy
side of the paper is upward.
Tip: The Smart Sheet must be placed at the
bottom.
Close paper tray cover
Load ZINK paper
3
01 01
01 01
01 02
01 01 02
01
5
Power on
1
Usage
Press and hold the power button for
3 seconds to turn on the printer. The
printer status light will be white and then
turn into an orange blink while it waits for
connecting with the phone.
1.Search "Liene Photo" in iOS App Store or
Google Play, or scan the QR code below
to download and install "Liene Photo"
App.
Connect Liene Photo App
2
6
2.Open Liene Photo App home page, click
"+", or click "Switch Printer" icon on the
top left corner, select "+", and add devices
according to the App prompt.
Tip: Due to the upgrade and update of Liene
Photo App, the actual operation may be slightly
dierent from the above description, please
follow the current guidelines in the App. Once
the printer is successfully connected to your
phone, you can print photos through the Liene
Photo App.
Instruction for buttons
3s
7s
Press and hold the
power button for 3
seconds
Press and hold the
power button for 7
seconds
ON/OFF
Restore
factory
settings
Tip: In the rmware upgrade status, the upgrade
will not be interrupted if you press and release or
press and hold the power button.
To save battery power, the printer will automatically
shut down after 10 minutes or more of standby.
7
Battery level indicator
Orange light on
White light on
Light o
Low battery level
Charging
Battery is sucient/
Fully charged
Status indicator
Light o
White light on
Orange light blink
White light blink
Weißes Licht blinkt
Orange light on
White and
orange are on
for 1 second
respectively
Power o
Standby
Bluetooth is not
connected
Printing /
Firmware upgrade
Printer failure
Restore factory
settings
8
The Liene Photo App will alert you to
various error conditions through in-app
messaging. Follow the app instructions
to resolve issues. For additional help on
specic issues with your Liene Photo printer,
see the FAQs on www.liene-life.com
Troubleshooting
Warranty & Support
Thank you for choosing Liene! We really
hope you will enjoy the product! Your
satisfaction means everything to us!
Liene provides a 1-year warranty for this
product, please contact us immediately if
you encounter any of the following, and
we will supply a replacement or refund.
To provide more prompt and professional
after-sale service, you may contact us via
below ways
E-mail: [email protected]
Phone: +1 (833) 755 2014
1. Receiving defective items.
2. Parts are broken in transit.
3. Item stops working within warranty.
9
Caution & Notice
The printer is best used in an
environment with a temperature of
20 ℃ - 25 ℃ and a relative humidity
of 40% - 60%. Improper ambient
temperature and humidity will aect
the printing quality, resulting in paper
jam and incomplete printing.
Please wipe this product with a soft dry
cloth. Do not use volatile liquids such
as wet cloth or paint thinner to wipe
during cleaning.
Please keep the keep the paper tray
cover closed closed to prevent dust
or other debris from falling into the
printer.
Please make sure that the printer
is fully charged or charged when
upgrading the rmware. Do not click
the reset button during the upgrade
to avoid damaging the rmware and
making the printer unusable.
The printer has built-in lithium
battery, which should be stored in
high temperature environment and
charged at least once every 3 months.
It is forbidden to use it after soaking in
water
1.
2.
3.
4.
5.
Use and maintenance of printer
10
Do not place the battery in an
extremely high temperature
environment, such as sunlight, re,
microwave oven, oven, etc., as this
may cause an explosion or leakage of
ammable liquids or gases.
If the battery becomes severely
swollen, do not continue to use it.
Only batteries approved by
the manufacturer are allowed.
Replacement with the wrong type
of battery may make the safety
protection failure, and there will be
explosion, re and other risks.
Do not disassemble, impact, crush
or cut the battery, which may cause
explosion.
Please do not dispose of the batteries
in the household garbage and follow
the appropriate regulations for safe
disposal of used batteries.
6.
7.
8.
9.
10.
Other manuals for Pearl K100
1
This manual suits for next models
1
Table of contents
Languages:
Other Liene Printer manuals
