LG PH1 User manual
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
PH1 PH1L PH1R
www.lg.com
OWNER’S MANUAL
Portable
Bluetooth Speaker
MFL69581828
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements
Do not overload wall outlets. Overloaded wall outlets
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION when using this product in environments
of low humidity
yIt may cause static electricity in environments of
low humidity.
yIt is recommended to use this product after
touching any metal object which conducts
electricity.
Getting Started4
Getting Started
1
This device is equipped with a portable battery or
accumulator.
How to Safely remove the batteries or the
battery pack from the equipment: To Remove the
old batteries or battery pack, follow the assembly
steps in reverse order. To prevent contamination of
the environment and bring on possible threat to
human and/or animal health, the old batteries or the
battery pack must be put in an appropriate container
at designated collection points. Do not dispose
of batteries or battery pack together with other
waste. It is recommended that you use local, free
reimbursement systems batteries or battery packs,
(may not be available in your area). The batteries or
the battery pack should not be exposed to excessive
heat such as sunshine, re or the like.
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents 5
1
2
3
4
1 Getting Started
2 Safety Information
6 Introduction
6 Accessories
7 Main Unit
8 Charging the Unit
8 – Connecting the AC adapter
8 – Checking Battery status
8 – Checking the charging status
2 Operating
9 Basic Operations
9 – Using power button
9 – Bluetooth Connection
9 – Simple Operation Guide
10 – Bluetooth LED (BLUE) status
10 Handsfree Function
11 Mood LED light
12 Listening to Music from Your External Device
12 Using BLUETOOTH® technology
13 – Listening to music stored on the
BLUETOOTH devices
14 Other Operation
14 – Resetting
14 – Notice for Auto Power Off
3 Troubleshooting
15 Troubleshooting
4 Appendix
16 Trademarks and Licenses
16 Handling the Unit
17 Specifications
Table of Contents
Getting Started6
Getting Started
1
Introduction
Symbol used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
USB cable (1) Simple Manual (1)
Getting Started 7
Getting Started
1
Main Unit
a hb i
c f jd g ke
aMIC
bBLUETOOTH LED
c
Receives or redials on the Bluetooth device.
(Refer to the page 10.)
d
T
Starts or pauses playback on the Bluetooth
mode.
e
Turns On / Off : Press and hold it.
fp : Turn down the volume.
go : Turn up the volume.
h
Battery LED
i
Turns on mood LED light. (Refer to the page 11.)
j
Portable In connector
Listens to music from your portable device.
k
USB port for charging
Getting Started8
Getting Started
1
Charging the Unit
Connecting the AC adapter
This device uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of of the unit.
3. Plug the AC adapter into an AC outlet.
(Not supplied)
If the battery is fully charged in charging mode,
LED (RED) is turned off.
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.8 A) with this speaker because of danger
of explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
> Caution
Checking Battery status
When AC Adapter is connected, battery charging is
started. You can check the charging status by LED
(RED).
LED Condition Description
Battery LED turns
off.
Battery is full
charged.
Battery LED
blinks with the
sound.
Battery is low.
(Power on)
Battery LED turns
on.
Battery is
charging.
yOperating time is approx. 5 hours. (Based
on fully charged the battery and continuous
playback using 50 % volume level.)
It may vary depending on the battery status
and operational conditions.
yIf you listening the music while charging,
it will take longer to charge.
, Note
Checking the charging status
If the power turned on, you can check the charging
status by pressing
1/!
button. Then Mood LED
light will blink depending on battery charging status.
Mood LED light
blinking
Battery
Status
3 times
60 %
60~25 %
25 %
twice
60 %
60~25 %
25 %
once
60 %
60~25 %
25 %
When Mood LED light turn off, you can check
battery charging status.
, Note
2 Operating
Operating 9
Operating
2
Basic Operations
Using power button
Power On / Off
Press and hold the
button for more than
2 seconds.
Bluetooth Connection
PH1(XX)
Play the desired music on the Bluetooth device. After
pairing, you can control playback using the buttons
on the front of the unit.
Simple Operation Guide
Function How to Status
Power On Press and hold the button. j LED blinks with the sound.
Power Off Press and hold the button. j LED turns off with the sound.
Bluetooth pairing
When j LED blinks with the sound.,
select LG PH1 (XX) from device list on
your smart device.
j LED turns on with the sound.
Play / Pause Press T. -
Forward skip Press T twice. -
Backward skip Press Tthree times. -
Volume control Press p or o
When this unit reaches minimum
volume or maximum volume, you can
hear beep sound.
Operating10
Operating
2
Bluetooth LED (BLUE) status
LED Condition Description
j LED blinks with
the sound.
Searching for
Bluetooth device.
j LED turns on
with the sound.
Bluetooth device
is connected.
yOnce pairing is performed, it does not need to
be done again even if you turn off this unit.
yTo disconnect the Bluetooth device, press
and hold T on the front of the unit for
3 seconds. The unit is disconnected.
, Note
Handsfree Function
You can receive incoming call and redial the last call
on your Bluetooth device to this speaker. Connect
the speaker to a Bluetooth device.
Function How to
Receive a call. Press .
Redial the last sending call. Press twice.
Reject a call. Press for
2 seconds.
End the call.Press .
You can adjust the call volume.
, Note
Other manuals for PH1
2
This manual suits for next models
2
Table of contents
Other LG Speakers manuals
