LG LPT-DW113P User manual
Network Camera
Owner’s Manual
MODEL: LPT-DW113P
LPT-DW113M
Before installing and using the camera, please read this owner's
manual carefully and retain for future reference.
2
This lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilater-
al triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the product.
WARNING: Do not install this equipment in a con-
fined space such as a bookcase or similar unit.
WARNING: This is a class A product. In a domestic
environment this product may cause radio interfer-
ence in which case the user may be required to take
adequate measures.
WARNING: Wiring methods shall be in accordance
with the National Electric Code, ANSI/NFPA 70.
WARNING: To reduce a risk of fire or electric shock,
do not expose this product to rain or moisture.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION: This installation should be made by a
qualified service person and should conform to all
local codes.
CAUTION: To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified personnel
only.
FCC WARNING: This equipment may generate or
use radio frequency energy. Changes or modifica-
tions to this equipment may cause harmful inter-
ference unless the modifications are expressly
approved in the instruction manual. The user could
lose the authority to operate this equipment if an
unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is oper-
ated in a commercial environment. This equipment
generates,uses,and can radiate radio frequency
energy and,if not installed and used in accordance
with the instruction manual,may cause harmful inter-
ference to radio communications. Operation of this
equipment in a residential area is likely to cause
harmful interference in which case the user will
be required to correct the interference at his own
expense.
• A suitable conduit entries, knock-outs or glands
shall be provided in the cable entries of this
product in the end user.
• Caution: Danger of explosion if battery is incor-
rectly replaced. Replaced only with the same or
equivalent type recommended by the manufac-
turer. Dispose of used batteries according to the
manufacturer’s instructions.
• Holes in metal, through which insulated wires
pass, shall have smooth well rounded surfaces
or shall be provided with brushings.
This product is manufactured to comply
with the radio interference requirements of
EEC DIRECTIVE 89/336/EEC, 93/68/EEC
and 2006/95/EC.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The subject camera have not been evaluated for
wall or ceiling mounting.
IntroductionConnectionsInstallationSetup
configuration
OperatingClient
Program
Additional
Information
Specifications
3
1. Read these instructions. - All these safety and operat-
ing instructions should be read before the product is
operated.
2. Keep these instructions. - The safety, operating and use
instructions should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in
the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instruc-
tions should be followed.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub, in a
wet basement; or near a swimming pool; and other areas
located near water.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid clean-
ers.
7.
Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions. -
Slots and
openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to pro-
tect it from over-heating. The openings should never be
blocked by placing the product on a bed, sofa, rug or
other similar surface. This product should not be placed
in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. D
o not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades
with one wider than the other. A grounding
type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience recep-
tacles, and the point where they exit from the prod-
uct.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution when
moving the cart/product combination to avoid injury
from tip-over.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14.
Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been
exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa-
tion, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
4
Contents
Introduction......................................5-8
Features............................................................... 5
Safety Precautions............................................... 6
Identification of Camera ...................................... 7
Identification of the Ceiling Mount Assembly...... 8
Connections...................................9-16
Before Connection............................................... 9
PC Requirements................................................. 9
Connection Overview .......................................... 9
Connecting Alarm Output.................................. 10
Connecting Alarm Input .................................... 10
Connecting Audio Input/Output ........................ 10
Connecting to the Network................................ 11
Connecting the Monitor ..................................... 11
Connecting Power Source................................. 11
Connecting the Camera to a Computer
using the Cross Cable..................................12-13
Connecting the Camera to the Network
using the LAN Cable without the Broadband
Router ........................................................... 14-15
Connecting the Camera to the Network
using the LAN Cable with the Broadband
Router ........................................................... 15-16
Installation....................................17-18
Precautions........................................................ 17
Mounting the Camera on the Ceiling ........... 17-18
Setup configuration ....................19-28
About Home Page ............................................. 19
Logging in to the Setup Page ........................... 19
General Setup.................................................... 20
Network Setup ................................................... 21
Video & Audio Setup ......................................... 22
Color Setup........................................................ 23
Alarm Setup .................................................. 23-24
DIO Setup.......................................................... 24
Preset Setup ...................................................... 25
Camera Setup............................................... 26-27
Homepage Update............................................ 28
Firmware Update ............................................... 28
Operating......................................29-31
Logging in to the Web Viewer ........................... 29
Using the Web Viewer .................................. 29-31
Client Program.............................32-37
Client Program Installation................................. 32
Using the DW113 Viewer.............................. 32-34
Register the Site Name and Connect
the Camera using the DW113 Viewer .......... 34-35
Setup the DW113 Viewer................................... 35
PTZ and Preset move control using
the Keyboard ..................................................... 36
Using the IP Finder.......................................36-37
Using the "CSMtoAVI" Program ......................... 37
Additional Information ................38-41
Mounting the Camera
using the optional Bell Bracket .................... 38-40
How to register the No-IP Web site
for DDNS function.............................................. 41
Specifications ..............................42-43
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the envi-
ronment and human health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where
you purchased the product.
IntroductionConnectionsInstallationSetup
configuration
OperatingClient
Program
Additional
Information
Specifications
5
Introduction
Features
xEmbedded Web Server
This camera is equipped with a web server func-
tion. The camera can be accessed using the
web browser on the computer to view the surveil-
lance images. Up to 50 users can simultaneously
access a single camera on the network.
xEvent Recording Function
When an event (motion detection, alarm input)
occurs, this camera records the live images and
sends the recorded images to the FTP server.
xE-mail Sending Function
If an alarm or motion detection occurs the live
image is captured and sent via e-mail using an
external e-mail server.
xAudio Function
The sound of the camera can be heard via speak-
er or sound can be input to the camera using the
microphone.
xUser Home page
It is possible to change the home page of the
camera.
xEasy Firmware Upgrade
xRelay Function
The relay can be controlled using the web viewer.
xHigh Sensitivity Support
The camera provides a high quality picture with
1/4" EX-view CCD.
xPreset Setting
Preset setting is the function to register camera
monitoring positions (preset positions) associated
with position numbers. By entering the position
numbers the cameras can be moved to the preset
positions.
A maximum of 128 preset positions are available.
The holding time is adjustable.
xPreset Tour
Tours all preset positions that have already been
registered.
xAuto Flip
The auto flip function allows the tilt angle to widen
up to 180°. The image on the monitor screen is
flipped horizontally and vertically at the tilt angle
of approx. 90°.
xSophisticated Design
This is a surveillance camera that can fit any
indoor surroundings because it comes in a com-
pact size and has a sophisticated design.
xZoom Lens & Auto Focus
This camera can zoom maximum of 54 times with
optical and digital zoom (Optical zoom: 27 times,
Digital zoom: 2 times). If the WDR (Wide Dynamic
Range) function is activated the digital zoom func-
tion is not available.
xAlarm-In Function
Alarm input signals are supplied from external
devices through the ALARM IN connector to turn
the camera to a preset position.
xDay & Night Function
This camera can select either color or black &
white. It is possible to set color in the daytime and
black & white at night to suit the low illumination
(filter conversion type).
x DSS (Digital Slow Shutter) Function
It is possible to carry out highly sensitive surveil-
lance with the DSS (Digital Slow Shutter) function.
x WDR (Wide Dynamic Range) Function
The camera can be set to the best condition for
watching it inside or outside with a strong back
light.
x Power Supply
This camera must only be operated using a DC
12V certified/listed class 2 power supply.
Notes:
•The noise may occur from the camera during the
camera is working.
• The pictures used in this owner's manual are
based on Windows XP.
Introduction
6
Safety Precautions
xDo not attempt to disassemble the camera
To prevent electric shock, do not remove screws
or covers. There are no user serviceable parts
inside. Ask a qualified service personnel for ser-
vicing.
xAvoid the camera with direct sunlight
Do not aim the camera at bright objects. Whether
the camera is in use or not, never face it with
direct sunlight or other extremely bright objects.
Otherwise blooming or smear may be caused.
xHandle the camera with care
Do not abuse the camera. Avoid striking, shaking,
etc. The camera could be damaged by improper
handling or storage.
xDo not use strong solvents or detergents
Use a dry cloth to the camera when it is dirty. If
it is hard to remove the dirt on the camera, use a
mild detergent and wipe it gently.
xDo not install this camera upside down
This camera is designed for mounting on the ceil-
ing or wall. If you install this camera upside down,
for example, mounted on the floor, it may cause
malfunction.
xDo not use the camera in such places as
shown below.
The lens may become cloudy due to condensa-
tion if the camera is used under the following
conditions.
- Rapid temperature fluctuation by switching an
air conditioner on and off.
- Rapid temperature fluctuation due to frequent
door opening and closing.
- Use in an environment where eyeglasses
become foggy.
- Use in a room filled with cigarette smoke or
dust.
If the lens becomes cloudy due to condensation,
remove the dome cover and wipe all moist
surfaces with a soft cloth.
xBefore operating, please check proper tem-
perature, humidity and power source ratings.
Use the camera under conditions where tempera-
ture is between -10 °C – +50 °C and humidity is
below 80%.
The input power source is DC 12V (24W).
xConsumables
Parts having contacts such as the lens-drive
motors, cooling fan built inside the camera are
subject to wear with time. About replacement and
maintenance of such parts, please ask the near-
est service center.
Accessories
Software CD
Screws and
Wrench
Terminal Blocks
Cross Cable
IntroductionConnectionsInstallationSetup
configuration
OperatingClient
Program
Additional
Information
Specifications
7
aALARM OUT Terminal (CH1/CH2)
Output terminals for alarm signal.
bVIDEO OUT (Video output cable with BNC
connector)
Connects the video connector to the monitor.
cLAN Port
For network connection with a LAN cable.
dALARM IN (Sensor Input) Terminal (CH1/
CH2)
Input terminals for alarm signal.
eLocking bracket
Attach the Ceiling Mount Assembly with camera
body using the locking bracket.
fLocking screw
Tighten this screw to fixing the Ceiling Mount
Assembly with camera body.
gDC 12V Terminal (Class 2 Only)
DC 12 V power input terminal.
hRS-232 Console
Not used (For service only).
iAUDIO Terminal (MIC Input / SPEAKER
Output)
Input/Output terminals for audio signal.
jCamera body
Identification of Camera
a
b
c
h
i
j
d
f
e
g
Introduction
8
aDip Switch
You can reset the factory default settings.
The factory default position of the dip switch and
function are as shown below.
Switch No. Description
1 Factory Reset.
2 Not used.
3 Not used (Terminal mode ON).
4 Not used (Only terminal mode).
bLocking bracket of Ceiling Mount Assembly
Attach the Ceiling Mount Assembly with camera
body using the locking bracket.
cLAN Indicator LED
Lights when the LAN cable is connected and
activated correctly.
dCooling fan
eACT Indicator LED
Blinking when the camera is activated.
fCommunication terminal between camera
body and the Ceiling Mount Assembly
Connect the communication cable of the camera
body.
ce
d
f
a
b
Identification of the Ceiling Mount Assembly
ON
OFF
IntroductionConnectionsInstallationSetup
configuration
OperatingClient
Program
Additional
Information
Specifications
9
Before Connection
Removing the protection tape
Before using the camera, remove the protection
tape.
Caution: Remove the protection tape carefully.
1. Loose the screws using the wrench and remove
the dome cover as shown below.
2. Remove the protection tape and attach the dome
cover.
PC Requirements
xOS (Operating System): Windows 98, Windows
2000 or Windows XP, DirectX 8.1 or higher.
xCPU: Intel Pentium III with 1GHz or higher.
xRAM: 256 MB or higher.
xGraphics Card: AGP VGA with 64 MB Video RAM
or higher.
(Minimum Resolution: 1024 x 768)
xBrowser : Internet Explorer 6.0 or higher.
Connection Overview
Precautions
• The connections should be made by qualified
service personnel or system installers in accor-
dance with all local codes.
• DC 12 V (24W) should be used.
When powered up, the camera performs a self-
check (including one panning, tilting, zooming
and focusing operation).
Connections
Protection
tape.
Connections
10
Connecting Alarm Output
Connect the alarm (relay) using the terminal block.
Terminal No. Description
1, 2 Alarm Out CH1
3, 4 Alarm Out CH2
Note:
Relay Output Specification (Default: Open)
- Maximum Load Power: 100mA@DC 20V,
100mA @ AC 28V.
- Use a relay if the voltage or current of the con-
nected device exceeds the ratings.
Connecting Alarm Input
Connect up to 2 alarm sensors using the terminal
block.
Terminal No. Description
1, 2 Alarm Input CH1
3, 4 Alarm Input CH2
Note:
Alarm sensor input Specification (Default: Open)
- Switch open or close by an external sensor.
- You can switch by using the program.
Connecting Audio Input/Output
Connect the audio signal using the terminal block.
Terminal No. Description
1, 2 Speaker
3, 4 Mic.
Notes:
• Recommended Audio device
- Mic.: Use the Carbon Microphone.
- Speaker: Use the speaker with an amplifier.
• You should install the microphone from the camera
with 1 meter length or more. If not, the noise may
occur from the microphone by the camera.
5~7 mm
To Alarm Out
CH1
To Alarm Out
CH2
5~7 mm
To Alarm Input
CH1
To Alarm Input
CH2
5~7 mm
SPEAKER
MIC
This manual suits for next models
1
Table of contents
Other LG Security Camera manuals
