LG Magic Remote Operation manual

Magic Remote User

Information

Model Name : AN-MR19BA

목

목목

목 차

차차

차

1. 리모콘의 개요 및 제원

(1) 개 요

(2) 제 원

2. 주의 사항

3. 고객 지원

Korean

한국어

한국어한국어

한국어

1. 리모콘의

리모콘의리모콘의

리모콘의 개요

개요개요

개요 및

및및

및 제원

제원제원

제원

(1) 개 요

-매직 리모컨의 사용 방법은 TV 매뉴얼을 참조하세요.

이 리모컨은 사용자가 댁내에서 리모컨을 무선 마우스처럼 사용하여

TV를 제어할 수 있는 제품으로써, 기존 적외선 리모컨이 육안상에 위치한

제품을 제어했던 반면에 댁내 10m 이내에서 방향에 상관없이 제어 할 수

있는 2.4 GHz대RF 리모컨이다. (음성인식지원)

(2) 제 원

구

구구

구 분

분분

분 내

내내

내 용

용용

용

모델명 AN-MR19BA

무선 사양 및 주파수 Bl etooth LE / 2.400 GHz ~ 2.4835 GHz

채널 40 채널

전원 DC 3V

알카라인 AA 1.5 V 건전지 2개 사용

동작 온도 0 ℃~ 40 ℃

2. 주의 사항

(1) 건전지를 교체한 후에는 리모컨 사용법에 따라 페어링 후에 사용 한다.

(2) 건전지를 교체 후에 리모컨이 정상 동작하지 않는 경우, 페어링 설정을

다시 해 주세요.

(3) 장기간 리모컨을 사용하지 않는 경우, 건전지를 제거해 두는 것이 좋다.

(4) 건전지를 분해하거나, 열을 가해서는 안 된다.

(5) 건전지를 떨어뜨리거나, 케이스가 손상될 정도로 극심한 충격을 줘서는

안 된다.

(6) 건전지를 물에 넣어서는 안 된다.

(7) 건전지를 거꾸로 삽입시 폭발의 위험이 있다.

(8) 지정된 장소에 사용한 건전지를 폐기 한다.

(9) 건전지 뚜껑을 열면, 라벨을 확인할 수 있습니다.

3. 고객

고객고객

고객 지원

지원지원

지원

TV 매뉴얼의 서비스 연락처를 참조하세요.

[KCC 인증 마크 및 인증번호]

상 호 명 :엘지전자(주)

인증번호 :R-CRM-LGE-MR19BA

제조연월 : 2019.

제조자/제조국가 :엘지전자(주)/대한민국

기자재의 명칭/모델명 :특정소출력

무선기기(무선데이터통신시스템용 무선기기)/AN-MR19BA

A/S 정보 :㈜ 엘지전자서비스

Tel : 1544-7777

홈페이지 : www.lgeservice.co.kr

Table of Contents

1. Overview and specification of the remote control

(1) Overview

(2) Specification

2. Preca tions

3. C stomer S pport

English

1. Overview and Specifications for the Remote Control

(1) Overview

- Instr ctions for sing the Magic Remote control are in the TV

man al.

this remote ses RF(Radio Freq ency) instead of IR (InfaRed light).

this remote will operate within 10m of the tv and does

not req ire it be pointed at the tv.(voice recognition s pport)

(2) Specifications

"This device can be operated in at least one Member State witho t

infringing applicable req irements on the se of radio spectr m"

Categories Details

Model No. AN-MR19BA

Range of freq ency 2.400 GHz ~ 2.4835 GHz

O tp t Power(Max.) 4dBm(e.i.r.p)

Channel 40 channels

Power so rce AA 1.5 V,

2 alkaline batteries are sed

Operational

temperat re range 0 ℃~ 40 ℃

2. Preca tions

(1) After replacement of the battery, se the remote control following pairing

in accordance with ser man al.

(2) If the nit does not operate after replacement of battery, reattempt pairing

in accordance with the ser man al.

(3) If the remote controller is not being sed for prolonged period of time, it is

recommended yo remove the battery from the nit.

(4) Do not dismantle or exert heat to the battery.

(5) Do not drop battery or exert extreme impact that may even ca se the case

to be damaged.

(6) Do not immerse the battery in water.

(7) There is danger of explosion if a the battery is inserted reversely.

(8) Properly dispose of sed batteries.

(9) Open the battery cover to find the label.

3. C stomer S pport

Refer to the contact n mber for services provided in the TV Man al.

Federal Communications Commission(FCC) Statement

You are cautioned that changes or modifications not expressly

approved by the part responsible for compliance could void

the user’s authority to operate the equipment.

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of

the FCC rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However,there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including

interference that may cause undesired operation of the

device.

You are cautioned that changes or modifications not expressly

approved by the part responsible for compliance could void the

user’s authority to operate the equipment.

FCC Caution

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to

operate this equipment and For indoor use only, use outdoors or in

other modes not covered by this manual may violate the FCC

regulation and violate the user authority to use the product.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter. End users

must follow the specific operating instructions for satisfying RF exposure

compliance.

Industry Canada Statement

[English]

Industry Canada Statement

(For Canada)

This device complies with Industry Canada’s licence-exempt RSS

Stadard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference

that may cause undesired operation of the device.

Avis d'industrie canada

Cet appareil est conforme aux normes CNR d’Industrie Canada

applicables aux dispositifs exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes :

1) l’appareil ne doit pas produire de brouillage;

2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

IC Radiation Exposure Statement

(For Canada)

This equipment complies with IC radiation exposure limits set forth for an

Uncontrolled environment.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.

SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE

THE EQUIPMENT.

Other manuals for Magic Remote

This manual suits for next models

Table of contents

Popular Remote Control manuals by other brands

Panasonic

Panasonic EUR7622KB0 Operation guide

Bang & Olufsen

Bang & Olufsen Beo4 user manual

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 user manual

Multiplex

Multiplex PROFI TX 9 instructions

One Remote

One Remote RMB4 user manual

FUTABA

FUTABA 9ZAP - PART2 manual

HR Matic

HR Matic HR MULTI 3 quick start guide

Yamaha

Yamaha ACC-GNRST-30-20 installation instructions

EisSound

EisSound KBSOUND user manual

Marantz

Marantz RC101 user guide

Conrad

Conrad FS20 TC6 operating instructions

Anritsu

Anritsu MP1777A Operation manual

Niles

Niles WVC100 Installation & operating guide

RCA

RCA RCU1300 manual

Bang & Olufsen

Bang & Olufsen BEO6 Getting started

GE 94901 instruction manual

Onbon

Onbon YQ1-75 user manual

FUTABA

FUTABA R7108SB Full manual