Lexmark MS810n Configuration guide
Printing Guide
Loading the 250‑or 550‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1Pull out the tray.
Notes:
•When loading folio‑, legal‑, or Oficio‑size paper, lift the tray slightly and pull it out completely.
•Avoid removing trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
2Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.
Printing Guide
Page 1 of 18
Note: Use the paper size indicators at the bottom of the tray to help position the guides.
3Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.
Notes:
•Lock the length guide for all paper sizes.
•Use the paper size indicators at the bottom of the tray to help position the guides.
Printing Guide
Page 2 of 18
4Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on
a level surface.
5Load the paper stack with the printable side facedown.
Note: Make sure the paper or envelope is loaded properly.
•There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Without an optional staple finisher With an optional staple finisher
ABC
One‑sided printing One‑sided printing
ABC
Two‑sided printing
ABC
Two‑sided printing
Printing Guide
Page 3 of 18
•If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the
paper are on the right side of the tray.
One‑sided printing Two‑sided printing
ABC
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
•Do not slide the paper into the tray. Load paper as shown in the illustration.
•If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the
tray.
Printing Guide
Page 4 of 18
•Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Warning—Potential Damage: Overfilling the tray can cause paper jams.
Printing Guide
Page 5 of 18
•When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is
the alternate paper fill indicator.
6For custom‑or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length
guide.
7Insert the tray.
8From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams and print quality problems.
Printing Guide
Page 6 of 18
Loading the 2100‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1Pull out the tray.
2Adjust the width and length guides.
Loading A5‑size paper
aPull up and slide the width guide to the position for A5.
LGL
OFC
FOLIO
LTR
A4
A5
1
LGL
OFC
FOLIO
LTR
A4
A5
2
LGL
OFC
FOLIO
LTR
A4
A5
Printing Guide
Page 7 of 18
bSqueeze and slide the length guide to the position for A5 until it clicks into place.
12
cRemove the A5 length guide from its holder.
12
dInsert the A5 length guide into its designated slot.
Note: Press the A5 length guide until it clicks into place.
Printing Guide
Page 8 of 18
Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper
aPull up and slide the width guide to the correct position for the size of the paper being loaded.
LGL
OFC
FOLIO
LTR
A4
A5
1
LGL
OFC
FOLIO
LTR
A4
A5
2
LGL
OFC
FOLIO
LTR
A4
A5
bIf the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not
attached, then proceed to step d.
Printing Guide
Page 9 of 18
cPut the A5 length guide in its holder.
2
1
dSqueeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place.
Printing Guide
Page 10 of 18
Other manuals for MS810n
3
This manual suits for next models
1
Table of contents
Other Lexmark Printer manuals
Lexmark
Lexmark X651DE User manual
Lexmark
Lexmark MS810 Series Configuration guide
Lexmark
Lexmark All User manual
Lexmark
Lexmark Pro5500 Series User manual
Lexmark
Lexmark M5100 Series User manual
Lexmark
Lexmark T632 User manual
Lexmark
Lexmark C6160 User manual
Lexmark
Lexmark MS410 series Manual
Lexmark
Lexmark 34A0252 User manual
Lexmark
Lexmark Optra SC 1275 User manual
Lexmark
Lexmark M3250 User manual
Lexmark
Lexmark Z715 Series User manual
Lexmark
Lexmark 6500E Technical manual
Lexmark
Lexmark 248X-200 series User manual
Lexmark
Lexmark MS710 Series User manual
Lexmark
Lexmark M1140 User manual
Lexmark
Lexmark 1500 Series User manual
Lexmark
Lexmark 1300 Series User manual
Lexmark
Lexmark CS410 series Instruction Manual
Lexmark
Lexmark C520 Series User manual
