Lexmark M3150 User manual

Moving Guide

Before moving the printer

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer

damage:

•Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.

•Disconnect all cords and cables from the printer before moving it.

•If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side

of the tray toward the front of the tray until it clicks into place.

•Use the handholds located on both sides of the printer to lift it.

•Make sure your fingers are not under the printer when you set it down.

•Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any hardware

options, then leave enough room for them also. It is important to:

•Set up the printer near a properly grounded and easily accessible electrical outlet.

•Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156

standard.

•Provide a flat, sturdy, and stable surface.

•Keep the printer:

–Clean, dry, and free of dust.

–Away from stray staples and paper clips.

–Away from the direct airflow of air conditioners, heaters, or ventilators.

–Free from direct sunlight and humidity extremes.

•Observe the recommended temperatures and avoid fluctuations.

Moving Guide

Page 1 of 2

Ambient temperature 16 to 32°C (60 to 90°F)

Storage temperature ‑20 to 40°C (‑4 to 104°F)

•Allow the following recommended amount of space around the printer for proper ventilation:

1Right side 30 cm (12 in.)

2Front 51 cm (20 in.)

3Left side 20 cm (8 in.)

4Rear 20 cm (8 in.)

5Top 30 cm (12 in.)

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

•Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.

•Keep the printer in an upright position.

•Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Moving Guide

Page 2 of 2

Other manuals for M3150

This manual suits for next models

Table of contents

Other Lexmark Printer manuals

Lexmark

Lexmark M1145 Instruction Manual

Lexmark

Lexmark C912 Product information sheet

Lexmark

Lexmark MS310 Series User manual

Lexmark

Lexmark 12N0008 - C 910 Color LED Printer Operating instructions

Lexmark

Lexmark MS610dn User manual

Lexmark

Lexmark C920 SERIES User manual

Lexmark

Lexmark CS310n User manual

Lexmark

Lexmark Monochrome Laser Operating manual

Lexmark

Lexmark Z2400 Series User manual

Lexmark

Lexmark 632n - T B/W Laser Printer User manual

Lexmark

Lexmark 5600 Series User manual

Lexmark

Lexmark E210 User manual

Lexmark

Lexmark CS410 series User manual

Lexmark

Lexmark C720 SERIES Product information sheet

Lexmark

Lexmark ST9820 User manual

Lexmark

Lexmark 780dn - C Color Laser Printer Manual

Lexmark

Lexmark C530 series, C532 series, C534 series User manual

Lexmark

Lexmark S600 User manual

Lexmark

Lexmark MS510 Series Manual

Lexmark

Lexmark 21G8600 - Z 816 Color Jetprinter Inkjet... User manual

Lexmark

Lexmark 250dn - E B/W Laser Printer User manual

Lexmark

Lexmark MS610dn Service manual

Lexmark

Lexmark E360D series User manual

Lexmark

Lexmark C950e User manual

Popular Printer manuals by other brands

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions