Leica F12 I User manual
Leica F12 I
User Manual
Leica F12 I Floor Stand Manual 2
Table of Contents
General Instructions 3
Safety Concept 4
Symbols Used 5
Safety Instructions 6
Leica F12 I
Floor Stand
Introduction 9
Overview (Sample Configuration) 10
Installation
Pedestal and Large Vertical Column 12
Large Horizontal Arm and Flex-arm 13
Small Vertical Column: Assembly 14
Small Vertical Column: Montage 15
Small Vertical Column: Height Adjustment 16
Focusing Arm: Configuration 1 for Table Inspections 17
Focusing Arm: Configuration 2 for Table Inspections 18
Focusing Arm: Configuration 3 for Table Inspections 19
Focusing Arm: Configuration 1 for Wall Inspections 20
Alternative: Variable Focusing Arm 21
Microscop Installation
Optics Carrier and Objective 23
Tube and Eyepieces 24
Dioptric Correction and Parfocality 25
Operation
Adjusting the Joint Resistance 27
Balancing the Flex-arm 28
Adjusting the Working Height of the Microscope 29
Safe Transport 30
Illumination
(Optional) Leica LED1000 Combi Controller 33
Leica High-power Spotlight 35
Leica 2-arm LED Spotlight 36
Appenidx
Care and Maintenance 38
Troubleshooting 39
Technical Data 40
Dimensions 41
Leica F12 I Floor Stand Manual 3
General Instructions
Safety Concept
Before installing the Leica F12 I floor stand or
using it for the first time, please read the "Safety
Concept" brochure provided. It contains additi-
onal information on handling and care.
Use in clean rooms
The Leica F12 I series can be used in clean rooms
without any problems.
Cleaning
ϘDo not use any unsuitable cleaning agents,
chemicals or techniques for cleaning.
ϘNever use chemicals to clean colored
surfaces or accessories with rubberized
parts. This could damage the surfaces, and
specimens could be contaminated by abra-
ded particles.
ϘIn most cases, we can provide special solu-
tions on request. Some products can be
modified, and we can offer other accesso-
ries for use in clean rooms.
Servicing
ϘRepairs may only be carried out by Leica
Microsystems-trained service technicians.
Only original Leica Microsystems spare
parts may be used.
Responsibilities of person in charge of
instrument
ϘEnsure that the Leica floor stand is opera-
ted, maintained and repaired by authorized
and trained personnel only.
Leica F12 I Floor Stand Manual 4
Safety Concept
The Leica F12I is shipped with an interactive
CD-ROM, where you can find all relevant user
manuals. Keep it in a safe place, and readily
accessible to the user. User manuals and
updates are also available for you to download
and print from our web site www.leica-micro-
systems.com.
The "Safety Concept" brochure contains addi-
tional safety information regarding service
work, requirements and the handling of the
floor stand, the installed stereomicroscope, the
electrical accessories as well as general safety
instructions.
You can combine individual system articles
with articles from external suppliers (e.g. cold
light sources, etc.). Please read the user manual
and the safety requirements of the supplier.
Before installing, operating or using the inst-
ruments, read the user manuals listed above.
In particular, please observe all safety instruc-
tions.
To maintain the unit in its original condition
and to ensure safe operation, the user must
follow the instructions and warnings contained
in these user manuals.
Leica F12 I Floor Stand Manual 5
Symbols Used
Warning of a danger
This symbol indicates especially impor-
tant information that must be read and
complied with. Failure to comply can cause the
following:
ϘHazards to persons!
ϘInstrument malfunctions and damage.
Warning of hazardous electrical voltage
This symbol indicates especially
important information.Failure to
observe can cause the following:
ϘHazards to persons!
ϘInstrument malfunctions and damage.
Danger due to hot surface
This symbol warns against touching hot
surfaces, such as light bulbs.
Important information
This symbol indicates additional infor-
mation or explanations that are intended
to provide clarity.
Leica F12 I Floor Stand Manual 6
Safety Instructions
Intended use
ϘRefer to the "Safety Concept" brochure.
Non-intended use
ϘRefer to the "Safety Concept" brochure.
The instruments and accessories described
in this manual have been safety-tested and
checked for possible hazards. The responsible
Leica affiliate must be consulted whenever
the instrument is altered, modified or used in
conjunction with non-Leica components that
are outside of the scope of this manual.
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Installation location
ϘRefer to the "Safety Concept" brochure.
ϘElectrical components must be placed at
least 10 cm away from the wall and from
flammable substances.
ϘAvoid large temperature fluctuations, direct
sunlight and vibrations. These conditions
can distort measurements and microgra-
phic images.
ϘIn warm and warm-damp climatic zones,
the individual components require special
care in order to prevent the build-up of
fungus.
Requirements to be met by the operator:
ϘRefer to the "Safety Concept" brochure.
Ensure that:
ϘThe Leica F12 I is operated, maintained and
repaired only by authorized and trained
personnel.
ϘAll operators have read, understood and
observe this User Manual, and particularly
the safety regulations.
Leica F12 I Floor Stand Manual 7
Safety Instructions (continued)
Repairs, service work
ϘRefer to the "Safety Concept" brochure.
ϘOnly original Leica Microsystems spare
parts may be used.
ϘBefore opening the instruments, switch off
the power and unplug the power cable.
ϘTouching the live electric circuit can cause
injury.
Transport
ϘAlways use the original packaging for ship-
ping or transporting the Leica F12 I.
ϘIn order to prevent damage from vibrations,
disassemble all moving parts that (accor-
ding to the user manual) can be assembled
and disassembled by the customer and
pack them separately.
Because the pedestal of the Leica
F12 I is particularly heavy, always
request assistance from another person when
transporting it!
Installation in third-party products
ϘRefer to the "Safety Concept" brochure.
Disposal
ϘRefer to the "Safety Concept" brochure.
Legal requirements
ϘRefer to the "Safety Concept" brochure.
EC Declaration of Conformity
ϘRefer to the "Safety Concept" brochure.
Leica F12 I Floor Stand Manual 8
Leica F12 I
Floor Stand
Leica F12 I Floor Stand Manual 9
Congratulations on purchasing the Leica F12
I by Leica Microsystems. The particular design
of this floor stand makes it ideally suited for
mobile examinations of specimens. Whether
material inspection, quality control or art
restoration—in fact anywhere you might need
a mobile microscopy workstation, you will find
that the Leica F12 I is a flexible, sturdy and cost-
effective solution.
As versatile as your work
The Leica F12 I supports the Leica stereomicro-
scopes M50, M80 and the entire Leica S series.
Not only are there many models to choose from,
but there is also a range of accessories to fulfill
every possible wish. Even if your requirements
are like no one else's: Your Leica consultant will
configure a workstation that meets your needs
perfectly.
For more information about Leica Micro-
systems products and services and the
address of your nearest Leica repre-
sentative, please visit our website:
www.leica-microsystems.com
Thank you for choosing our products. We hope
that you will enjoy the quality and performance
of your new floor stand.
Leica Microsystems (Schweiz) AG
Industry Division
CH-9435 Heerbrugg
Introduction
Leica F12 I Floor Stand Manual 10
Overview (Sample Configuration)
1 Rotary knob for joint brake
2 Small vertical column
3 Microscope
4 Pedestal
5 Castors with footbrakes
6 Cable holder
7 Small horizontal arm
8 Large horizontal arm
9 Storage compartment for power
pack
10 Large vertical column
11 Brake knob for locking the verti-
cal position
12 Rotary knob for balancing
13 Flex-arm
13
12
11
9
7
4
5
3
8
1
6
1
1
2
10
Table of contents
Other Leica Microscope manuals
Leica
Leica Z6 APO User manual
Leica
Leica ZOOM 2000 User manual
Leica
Leica DM4000B User manual
Leica
Leica DM R Series User manual
Leica
Leica ATC 2000 User manual
Leica
Leica BM E User manual
Leica
Leica DM5500 B User manual
Leica
Leica TCS SP5 X User manual
Leica
Leica DMi8 User manual
Leica
Leica TCS SP5 X User manual
Leica
Leica S4 E StereoZoom User manual
Leica
Leica DMI4000B User manual
Leica
Leica PROVEO 8 User manual
Leica
Leica DM1000 LED User manual
Leica
Leica DM100 User manual
Leica
Leica DM750 M User manual
Leica
Leica SP8 User manual
Leica
Leica Sp5 WLL STED Operation instructions
Leica
Leica ARveo User manual
Leica
Leica M500 OH3 User manual
