Larson Electronics EPLC2-LED-150W-RT-EB User manual

EPLC2-LED-150W-RT-EB

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

1of 3

150W Explosion Proof LED Flood Light

C1D2, C2D1 - 17,500 Lumens - Surface Mount - Eyebolt

Instruction Manual

This explosion proof light is designed for illumination of industrial locations. It uses the latest in

solid state lighting technology for long life, low maintenance and high efficiency.

The unique design focuses the light where it is needed, giving improved efficiency over a

conventional HID luminaire.

An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from any

nominal 100-277V AC 50/60 Hz power supply without any variation in light output. A separate low

voltage model is also available which allows 11-25 Volts AC/DC power. Check product nameplate for

correct voltage.

WARNING

To avoid the risk of fire, explosion or electric shock, this product should be installed, inspected

and maintained by a qualified electrician only, in accordance with all applicable electrical codes.

To avoid electric shock:

Be certain electrical power is OFF before and during installation and maintenance.

Luminaire must be connected to a wiring system with an equipment-grounding conductor.

To avoid explosion:

Make sure the supply voltage is within the luminaires’ voltage rating.

Ensure the marked T rating is less than the ignition temperature of the Hazardous

Atmosphere.

Do not operate in ambient temperatures above those indicated on the luminaire nameplate.

Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

For supply connections, use wire rated for at least 110°C

Recommended mounting height is 25-40 feet.

MOUNTING

This fixture offers an adjustable surface mounting system that allows this fixture to be mounted to any

flat surface including walls and ceilings. A single ½-13 bolt is used to mount the fixture to the

surface.

1. Using bolts, washers and nuts provided, attach brackets “A” to both sides of

bracket “B”.

2. The LED fixture has 9 holes for a versatile mount option. Select the holes that you would like

to use.

3. Brackets “A” will then be bolted to the LED fixture with the remaining bolts and washers.

4. The fixture is now ready for installation.

EPLC2-LED-150W-RT-EB

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

2of 3

See Images Below as a Reference

BRACKETS A

BRACKET B

BRACKETS A

BRACKET B

EPLC2-LED-150W-RT-EB

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

3of 3

WIRING (see attached wiring diagram)

This unit comes preconfigured with selected voltage, beam angle, and color temperature. Once

mounted, wire to a hazardous rated junction with the correct voltage on nameplate!

MAINTENANCE

Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool

down before performing maintenance.

Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens

will void the warranty.

1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend

routine checks to be made on a yearly basis. Frequency of use and environment should

determine this. It is recommended to follow an Electrical Preventive Maintenance Program

as described in NFPA 70B: Recommended practice for Electrical Equipment.

2. The lens should be cleaned periodically as needed to ensure continued photometric

performance. Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use

mild soap or a liquid cleaner.

3. Inspect the cooking fins on the luminaire to ensure that they are free of any obstructions

or contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if

needed.

4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

WARRANTY

Should further information not covered by these instructions be required, please contact Larson Electronics at

1-800-369-6671 or sales@larsonelectronics.com for further assistance.

Please visit LarsonElectronics.com for Warranty and Return information.

WARNING: CHECK NAMEPLATE

FOR PROPER VOLTAGE. DAMAGE

FROM IMPROPER VOLTAGE WILL

VOID WARRANTY.

Table of contents

Other Larson Electronics Lighting Equipment manuals

Larson Electronics

Larson Electronics EPL-EMG-CM-42W Instruction Manual

Larson Electronics

Larson Electronics EPLC2-QP-1X150LED-100 User manual

Larson Electronics

Larson Electronics EPL-HB-50LED-RT User manual

Larson Electronics

Larson Electronics LEDHWP-900-DNMS User manual

Larson Electronics

Larson Electronics EPL-HB-50LED-RT-JB2-6-EPP User manual

Larson Electronics

Larson Electronics HALD-24-1X150LED-V3 User manual

Larson Electronics

Larson Electronics EXP-EMG-2L-LE6 User manual

Larson Electronics

Larson Electronics EPL-HB-150LED-RT-140DB-JB3 User manual

Larson Electronics

Larson Electronics GL-29000GB User manual

Larson Electronics

Larson Electronics EPL-PM-50LED-100 User manual

Larson Electronics

Larson Electronics WAL-TL-2X12W-C-SP User manual

Larson Electronics

Larson Electronics LED10W-1X4LT User manual

Larson Electronics

Larson Electronics GSLEDIP6-C1D2 User manual

Larson Electronics

Larson Electronics EPL-FL1524-100 User manual

Larson Electronics

Larson Electronics WAL-TJL-250W-LED-CPR User manual

Larson Electronics

Larson Electronics EPL-QP-1X150RT User manual

Larson Electronics

Larson Electronics C1D2 User manual

Larson Electronics

Larson Electronics EPLFL-26W-P-LED-25 User manual

Larson Electronics

Larson Electronics EPL-18C-150LED-RT-125C User manual

Larson Electronics

Larson Electronics EPL-48-2L-LED-BLC User manual

Larson Electronics

Larson Electronics FRL-EMX-18-90W-FUVC-KT User manual

Larson Electronics

Larson Electronics WAL-HL-2000W-240V User manual

Larson Electronics

Larson Electronics EPL-FL1524-LED Series User manual

Larson Electronics

Larson Electronics EPL-SL-2-LED-ITG-M2 User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions