Larson Electronics EPP-3P4W-30A-N7 User manual

EPP-3P4W-30A-N7

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com 1of 2

Explosion Proof Pin and Sleeve Plug

3 Pole 4 Wire - 30 Amp - C1D1 - 600VAC / 250V DC Rated

Instruction Manual

Thank you for your purchase of the Larson Electronics EPP-3P4W-30A-N7.

WARNING:

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CRITICAL SAFETY INSTRUCTIONS:

•INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY

RELEVANT LOCAL BUILDING CODES.

•RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES ELECTRICAL

SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.

•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

•MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED LUMINAIRE FIXTURES VOLTAGE.

•TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP

OBJECTS. SUITABLE FOR DAMP LOCATIONS.

Explosion Proof Warnings

WARNING

TO AVOID THE RISK OFFIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,

INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL

APPLICABLE ELECTRICAL CODES.

TO AVOID ELECTRIC SHOCK:

•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

•PRODUCT MUST BE CONNECTED TO A WIRING SYSTEM WITH AN EQUIPMENT-GROUNDING

CONDUCTOR.

TO AVOID EXPLOSION:

•MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.

•ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS

ATMOSPHERE.

•DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE PRODUCT

NAMEPLATE.

•DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR

DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.

•ALL FASTENERS SHOULD BE PROPERLY SEATED.

Exp Cord Cap

Position device near work area for operation. Run cable to nearby power

source. Insert and twist-lock explosion-proof plug into a compatible receptacle

within the hazardous environment. See plug operation below.

PLUG OPERATION

Electrical connection between plug and compatible receptacle is accomplished

after plug fully inserts into receptacle and rotated clockwise.

1. Lift receptacle door and locate polarization on mating plug pin and

receptacle face. Insert plug straight all the way into receptacle until it

cannot go further.

2. Rotate plug clockwise limit (37º), this closes internal contacts and

completes circuit. This also mechanically locks plug into receptacle so it

cannot be pulled out.

3. To remove plug, push plug inward and turn to counterclockwise, pull plug

straight out.

EPP-3P4W-30A-N7

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com 2 of 2

OPERATION:

The Larson Electronics EPP-3P4W-30A-N4 Explosion Proof Pin and Sleeve Plug is a Class 1 & 2 Division 1 & 2 rated

cord cap approved for use in hazardous environments where flammable or explosion gases, vapors, or dusts exist or

stand the potential to exist. This 3-pole, 4-wire plug is designed to provide a secure connection for electrical equipment

within the hazardous location.

This explosion proof 3-pole 4-wire pin and sleeve plug is compatible with our EPO-3W4P-30A-ICB power receptacles.

This plug is rated for 30 amps and is suitable for Class 1, Divisions 1 & 2, Groups B, C and D, Class 1, Zones 1 & 2, IIB

+H² IIA, Class 2, Divisions 1 & 2, Groups F and G, and Class III rated. This explosion proof plug features non sparking

aluminum construction, recessed brass pins, a 30 amp current rating, and maximum voltage rating of 600V AC and 250V

DC.

INTER-COMPATIBILITY:

These plugs are are cross-interchangeable with Crouse Hind™ CHP plugs under catalogue number "CPH771" and

Hubble-Killark VERSAMATE® plugs under catalogue number "VP3034."

Any equipment requiring these C-H or H-K plugs should work with these plugs. Due to possible manufacturer changes we

cannot guarantee interchangeability although we have made every effort to ensure cross compatibility correctness.

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of

children when not in use.Inspect for good working condition prior to storage and before re-use.

REPLACEMENT PARTS

The EPP-3P4W-30A-N7 is designed to provide years of reliable performance. Should the need for replacement parts

arise, please contact Larson Electronics.

THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT

SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.

PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.

Table of contents

Other Larson Electronics Lighting Equipment manuals

Larson Electronics

Larson Electronics LEDLB-4-IR User manual

Larson Electronics

Larson Electronics LM-21-9.1-4S-EW User manual

Larson Electronics

Larson Electronics EPLC2-QP-1X70LED-100 User manual

Larson Electronics

Larson Electronics EPLFL-26W-P-LED-25 User manual

Larson Electronics

Larson Electronics EPL-48-4L-LED-D-V2-100C User manual

Larson Electronics

Larson Electronics EPL-SL-4-50X-50LED-RT-MBC-EPP User manual

Larson Electronics

Larson Electronics EPL-HB-150LED-RT-NSF User manual

Larson Electronics

Larson Electronics WCDE-11-6HPS-MR User manual

Larson Electronics

Larson Electronics EPL-120-150-EPP User manual

Larson Electronics

Larson Electronics RL-15-LED-CPR User manual

Larson Electronics

Larson Electronics HALPRM-PS-1000WMH User manual

Larson Electronics

Larson Electronics EPLC2-HB-50LED-RT User manual

Larson Electronics

Larson Electronics EPL-18C-150LED-RT-125C User manual

Larson Electronics

Larson Electronics TPM-GL20004-12C-1227-10C User manual

Larson Electronics

Larson Electronics EPL-TL-1X10W-C-DF-PA User manual

Larson Electronics

Larson Electronics BL24-LED-600V-100-HD User manual

Larson Electronics

Larson Electronics EPL-LB-50LED-RT-180B User manual

Larson Electronics

Larson Electronics EPL-FL1524-LED Series User manual

Larson Electronics

Larson Electronics LM-25-3S-EW-THM-12VDC User manual

Larson Electronics

Larson Electronics PTB-1-75FT User manual

Larson Electronics

Larson Electronics EPL-HB-150LED-RT-JB2-25-BCE User manual

Larson Electronics

Larson Electronics IND-LP-SS-24-2X2-2L-UVC User manual

Larson Electronics

Larson Electronics IND-HVAC-ACS-R1-DP-24-2L-XB User manual

Larson Electronics

Larson Electronics EPL-AMB-150LED-150-140DB User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions