Larson Electronics EPLC2-LED-150W-RT-JB2-50C User manual

EPLC2-LED-150W-RT-JB2-50C

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

1of 3

This explosion proof light is designed for illumination of industrial locations. It uses the latest in

solid state lighting technology for long life, low maintenance and high efficiency.

The unique design focuses the light where it is needed, giving improved efficiency over a

conventional HID luminaire.

An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from any

nominal 100-277V AC 50/60 Hz power supply without any variation in light output. A separate low

voltage model is also available which allows 11-25 Volts AC/DC power. Check product nameplate for

correct voltage.

WARNING

To avoid the risk of fire, explosion or electric shock, this product should be installed, inspected

and maintained by a qualified electrician only, in accordance with all applicable electrical codes.

To avoid electric shock:

•Be certain electrical power is OFF before and during installation and maintenance.

•Luminaire must be connected to a wiring system with an equipment-grounding conductor.

To avoid explosion:

•Make sure the supply voltage is within the luminaires’ voltage rating.

•Ensure the marked T rating is less than the ignition temperature of the Hazardous

Atmosphere.

•Do not operate in ambient temperatures above those indicated on the luminaire nameplate.

•Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

For supply connections, use wire rated for at least 110°C

Recommended mounting height is 25-40 feet.

MOUNTING

This fixture offers an adjustable surface mounting system that allows this fixture to be mounted to any

flat surface including walls and ceilings. A single ½-13 bolt is used to mount the fixture to the

surface.

1. Using bolts, washers and nuts provided, attach brackets “A” to both sides of

bracket “B”.

2. The LED fixture has 9 holes for a versatile mount option. Select the holes that you would like

to use.

3. Brackets “A” will then be bolted to the LED fixture with the remaining bolts and washers.

4. The fixture is now ready for installation.

150 Watt Explosion Proof LED Flood Light - Surface Mount -

17,500 Lumens - C1D2 - 50ft Cord

Instruction Manual

EPLC2-LED-150W-RT-JB2-50C

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

2of 3

See Images Below as a Reference

BRACKETS A

BRACKET B

BRACKETS A

BRACKET B

EPLC2-LED-150W-RT-JB2-50C

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

3of 3

WIRING (see attached wiring diagram)

This unit comes preconfigured with selected cord cap, voltage, and beam angle. Once mounted, plug

cord into compatible receptacle with correct voltage on nameplate!

MAINTENANCE

Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool

down before performing maintenance.

Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens

will void the warranty.

1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend

routine checks to be made on a yearly basis. Frequency of use and environment should

determine this. It is recommended to follow an Electrical Preventive Maintenance Program

as described in NFPA 70B: Recommended practice for Electrical Equipment.

2. The lens should be cleaned periodically as needed to ensure continued photometric

performance. Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use

mild soap or a liquid cleaner.

3. Inspect the cooking fins on the luminaire to ensure that they are free of any obstructions

or contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if

needed.

4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

WARRANTY

Should further information not covered by these instructions be required, please contact Larson Electronics at

1-800-369-6671 or sales@larsonelectronics.com for further assistance.

Please visit LarsonElectronics.com for Warranty and Return information.

WARNING: CHECK NAMEPLATE

FOR PROPER VOLTAGE. DAMAGE

FROM IMPROPER VOLTAGE WILL

VOID WARRANTY.

Table of contents

Other Larson Electronics Floodlight manuals

Larson Electronics

Larson Electronics LEDWP-500-M-20C User manual

Larson Electronics

Larson Electronics Stryker Light Manual

Larson Electronics

Larson Electronics LEDWP-600E-M User manual

Larson Electronics

Larson Electronics EPL-LED-150W-RT-JB2-X24V-75C-24W07 User manual

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2 User manual

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2-25C User manual

Larson Electronics

Larson Electronics HAL-TRN Series User manual

Larson Electronics

Larson Electronics LEDWP-720 User manual

Larson Electronics

Larson Electronics LEDWP-LP-450-TRN-DCM User manual

Larson Electronics

Larson Electronics HID-22-SL-480V User manual

Larson Electronics

Larson Electronics Golight RadioRay 7901 Manual

Larson Electronics

Larson Electronics EPLC2-WPLED-50W-RT User manual

Larson Electronics

Larson Electronics GL-4600 Manual

Larson Electronics

Larson Electronics WAL-QP-4X500-25 User manual

Larson Electronics

Larson Electronics EPL-LED-150W-RT-DIMM User manual

Larson Electronics

Larson Electronics EPL-LED-150W-RT-20-HDBC User manual

Larson Electronics

Larson Electronics EPL-WPLED-150W-RT-140DB User manual

Larson Electronics

Larson Electronics HAL-PRM-150W-LED User manual

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-DIMM User manual

Larson Electronics

Larson Electronics EPL-LED-2X150W-RT User manual

Larson Electronics

Larson Electronics RT-100C-XEMG-10C User manual

Larson Electronics

Larson Electronics LEDEQ-PK-24X2-CPR-SPFL User manual

Larson Electronics

Larson Electronics Golight Stryker ST Series Manual

Larson Electronics

Larson Electronics RCL200-RF User manual

Popular Floodlight manuals by other brands

VIZULO

VIZULO Micro Martin Mounting instruction

EuroLite

EuroLite LED IP FL-100 SMD user manual

Cooper Wheelock

Cooper Wheelock XB12 specification

Allen + Roth

Allen + Roth 17624-000 user manual

ADJ

ADJ 4 STAGE PAK User instructions

Cooper Lighting

Cooper Lighting EGL91SW233 Specification sheet

Max

Max 37496 instruction manual

BEGA

BEGA 85 143 Instructions for use

Beamz

Beamz 151.226 user manual

EuroLite

EuroLite LED IP FL-8 user manual

Ledj

Ledj PERFORMER 36 RGB user manual

Perel

Perel ELS3 user manual

Perel

Perel ELS3WD user manual

LumX

LumX LM 36130 instruction manual

Xtricity

Xtricity 4-80053 instructions

Stahl

Stahl 6521/4 Series operating instructions

Ecosense

Ecosense EcoSpec installation manual

Ayrton

Ayrton minipanel FX manual