Lantronix SLC 8000 User manual

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

Introduction

Thank you for your interest in the Lantronix SLC 8000 and for trying out the SLC 8000 virtual demo. Here

a few tips to help make the most out of your experience.

The SLC 8000 virtual demo starts off with the unit in a factory default state. Because you may want to

try connecting to a console, there are few settings you may want to configure right away.

Device Ports 1-4 on this demo are connected to simulated serial console ports to allow you to

experience a connection to a remotely managed device. The following steps will allow you to open a

web based SSH session to those console ports.

Additional suggestions will allow you to then look at a log of your session.

NOTE: The demo SLC has a self-signed SSL certificate. At any time when you are opening an SSL based

connection, it is not unexpected to get a security warning. Allow the session to proceed in those cases.

IMPORTANT: The Web SSH client on the SLC requires that the Java plug-in be installed on your browser.

Go to www.java.com for more information on installing Java.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

Welcome to the SLC 8000

Upon opening the web session to the SLC 8000, log in using the username demouser and password

demouser. You will be presented with the SLC 8000s home page:

To configure the SLC 8000 to accept a connection on the device port from the Web SSH client there are

a few settings you will need to enable. Start by clicking on the Device Port icon for Port 1.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

Once on the page, check the box next to “SSH In:”

Then, on “Apply” at the bottom of the page.

If you want the settings to apply to Port 1, as well as ports 2-4, you can select “IP Settings” from the

drop-down to the right of the “Apply” button, and enter “2-4” in the “to Device Ports:” field, then click

on “Apply”.

Next, you will want to enable WebSSH as a Service.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

To enable WebSSH, click on the “Services” tab.

Then, check the “Web SSH:” box

Then, click on “Apply” at the bottom of the page

Next, you can enable Local Logging, so you can review your session.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

To enable Local Logging on a port, click on the Device Port icon again.

Then, on the “Logging: Settings” link.

On the Device Ports –Logging page, click on the “Local Logging:” box.

Then, on the “Apply” button at the bottom of the page.

Now, you can launch a Web SSH session to the port.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

To launch a WebSSH session, select “WebSSH” from the “Select port for” menu.

Then, click on the port to which you wish to open the WebSSH session

You may get security warnings like this:

Click on the Continue, Allow, or OK buttons for the respective warnings to allow the session.

You will be prompted to enter credentials.

Enter the username demouser and the password demouser and click on “Login”.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

After a few moments, you will get a message indicating you are connected.

Press enter to get a login prompt.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

The login for all of the consoles is username root and password root.

Each port may have a different simulated server, like a Solaris or Linux server.

Enter commands like “ls” or “cd /” to build up some data in the port log.

To close the session, you can simply click on the X at the top right of the window.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

To view a log of the session, click on the “Configuration” button in the “Select port for” menu.

Then, on the Device Port for which you would like to view the log

Then, on the “Logging: Settings” link.

On the “Device Ports –Logging”page, click on the “View Local Log” link.

A log of your session will be displayed.

Lantronix SLC 8000 Virtual Demo Guide

Do More., are trademarks of Lantronix, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. All other trademarks are the property of

their respective owners. Specifications subject to change without notice.

This has been only a glimpse of the vast array of features found on the SLC 8000. For more information,

visit:

http://www.lantronix.com/SLC8000

Other manuals for SLC 8000

Other Lantronix Server manuals

Lantronix

Lantronix xSenso 2100 User manual

Lantronix

Lantronix PremierWave XC User manual

Lantronix

Lantronix XPort Direct Quick setup guide

Lantronix

Lantronix SCS User manual

Lantronix

Lantronix Com Port Redirector User manual

Lantronix

Lantronix ETS16PR User manual

Lantronix

Lantronix xDirect User manual

Lantronix

Lantronix DeviceLinx EDS00812N-01 User manual

Lantronix

Lantronix SGX 5150 User manual

Lantronix

Lantronix C 7/01 User manual

Lantronix

Lantronix WiPort Quick setup guide

Lantronix

Lantronix SecureBox SDS1100 User manual

Lantronix

Lantronix UDS1100 User manual

Lantronix

Lantronix UDS1100 User manual

Lantronix

Lantronix EDS32PR User manual

Lantronix

Lantronix SecureBox SDS2100 User manual

Lantronix

Lantronix WiBox 2100E User manual

Lantronix

Lantronix xDirect User manual

Lantronix

Lantronix ETS User manual

Lantronix

Lantronix Console Server 800 User manual

Lantronix

Lantronix EDS-MD EDS-MD4 User manual

Lantronix

Lantronix XPico 900-691-R User manual

Lantronix

Lantronix Device Server UDS 10 User manual

Lantronix

Lantronix MatchPort b/g Pro Quick setup guide

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started