Lantech IPES-0208CA-12V User manual

Lantech

IPES-0208CA

8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/

8x12V/24V/48V PoE at/af Injector Industrial Switch

User Manual

V1.2

May 2021

FCC Warning

This Equipment has been tested and found to comply with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy. It may cause harmful interference to radio

communications if the equipment is not installed and used in accordance

with the instructions. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

Content

Introduction................................................................ 1

Features................................................................... 1

Technical Specification............................................ 2

Package Contents................................................... 5

Safety Precaution.................................................... 5

Hardware Description ............................................... 6

Physical Dimension................................................. 6

Front Panel.............................................................. 7

Top View.................................................................. 8

LED Indicators......................................................... 8

Ports......................................................................... 9

Cabling................................................................... 10

Wiring the Power Inputs .......................................11

Wiring the Fault Alarm Contact........................... 13

Mounting Installation .............................................. 14

DIN-Rail Mounting................................................. 14

Wall Mounting........................................................ 15

Hardware Installation .............................................. 17

Installation Steps................................................... 17

Network Application................................................ 18

Troubleshooting ...................................................... 19

Introduction

IPES-0208CA Industrial Switch is a cost-effective solution, which meets the high

reliability requirements demanded by industrial applications, and also supports to

operate in the wide temperature -40°C ~ 75°C environments(-E model). Besides, the

equipment supports 12V/24V/48V DC power input and provides the PoE function with

48VDC output for any kinds of powered devices to receive power as well as data over

an RJ-45 cable.

Features

System Interface/Performance

RJ-45 port support Auto MDI/MDI-X Function

Embedded 8-port booster PoE injector function

SFP (Mini-GBIC) supports 100/1000 Dual Mode

IEEE 802.3af/at Standards

Back-plane (Switching Fabric): 5.6Gbps

1Mbits Packet Buffer

8K MAC Address Table

Support Operating Temperature (-20°C~60°C)/ (-40°C~75°C)-E models

DC 12V/24V/48V Redundant Power Input

Operating Temperature

Standard Temperature: -20°C~60°C

Extended Temperature: -40°C~75°C

Case/Installation

IP-30 Protection

Installation in a Pollution Degree 2 environment

DIN Rail and Wall Mount** Design

Provides EFT protection 3,000 VDC for power line

Supports 6,000 VDC Ethernet ESD protection

**Optional

Technical Specification

The technical specifications of IPES-0208CA Industrial Switch are listed as follows.

Communications

Compatibility

IEEE 802.3, 802.3u, 802.3ab 802.3z, 802.3x,

802.3af/at

LAN

10/100Base-T

Switch Architecture

Back-plane (Switching Fabric): 5.6Gbps

Packet throughput ability(Full-Duplex): 8.3Mpps

@64bytes

Interface

Connectors

10/100TX: 8 x RJ-45

10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x

100/1000 SFP sockets

LED Indicators

Unit: Power1, Power2, P-Fail, PoE

Ethernet port: Link/Active, Speed

PoE

Power Output

Per port 48 VDC, 15.4 Watts(802.3af)/30Watts(at)

Pin Assignment

RJ-45 port #1 ~ # 8 support IEEE 802.3af/at

End-point, Alternative A mode.

Positive (VCC+): RJ-45 pin 1, 2.

Negative (VCC-): RJ-45 pin 3, 6.

Data (1,2,3,6 )

Power

Power Consumption

10 Watts (Max.); POE Power Budget:240 Watts

(48V input); 120W(24V input); 90W(12V)

Power Input

External Power Supply: DC 9~56V, Redundant

power D9V~DC 56V and connective removable

terminal block

Fault Output

1 Relay Output

Mechanism

Dimensions (WxHxD)

74mm (W) x 114mm (D) x 152mm (H)

Enclosure

IP-30, Metal shell with solid mounting kits

Mounting

DIN Rail and Wall Mount** Design

Protection

ESD (Ethernet)

6,000 VDC

Surge (EFT for power)

3,000 VDC

Power Reverse

Yes

Overload current protection

Yes

Environment

Operating Temperature

Standard: -20°C~60°C /-4°F~140°F

Extended:- 40°C~75°C /-40°F~167°F

Operating Humidity

5% ~ 95% (non-condensing)

Storage Temperature

-40 ~ 85oC

Storage Humidity

5% ~ 95% (non-condensing)

Certifications

EMC

FCC Class A, CE EN55032 Class A, CE

EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE

EN-61000-4-4 (EFT),

CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS),

CE EN61000-4-8, CE EN61000-4-11,

CE EN61000-4-12, CE EN61000-6-2, CE

EN61000-6-4

Free Fall

IEC60068-2-32

Shock

IEC60068-2-27

Vibration

IEC60068-2-6

Package Contents

Please refer to the package contents list below to verify them against the checklist.

IPES-0208CA Industrial Switch (with DIN-Rail Bracket)

User manual (By request)

Removable Terminal Block

Optional Wall-mount Kit** (2 wall-mount bracket with screws)

Compare the contents of the industrial switch with the standard checklist above. If any

item is damaged or missing, please contact the local dealer for service.

Safety Precaution

Attention

IF DC voltage is supplied by an external circuit, please use a protection

device on the power supply input.

Hardware Description

In this paragraph, the Industrial switch’s hardware specs, ports, cabling information, and

wiring installation will be described.

If this switch needs to uplink with another switch via a PoE copper port, please

make sure the uplink port on the other unit is a none-PoE interface. You may also

contact our sales team to confirm if the switch supports power isolation.

Physical Dimension

IPES-0208CA Industrial Switch dimensions (W x D x H) is 74mm x 114mm x 152mm,

the detail dimensions as Figure-1

Figure-1: Mechanical Dimensions

Front Panel

The Front Panel of IPES-0208CA Industrial Switch is shown below Figure-2

Figure-2: Front Panel of the PoE Injectors Industrial Switch

This manual suits for next models

Table of contents

Other Lantech Switch manuals

Lantech

Lantech IES-3416DSFP User manual

Lantech

Lantech IPES/IES-5416T Series User manual

Lantech

Lantech IES-22812F-2P User manual

Lantech

Lantech IGS-2404 User manual

Lantech

Lantech IES-3 Series User manual

Lantech

Lantech IPES-3424DSFP-2P User manual

Lantech

Lantech LPES-2224C User manual

Lantech

Lantech IPGS-0016 User manual

Lantech

Lantech IGC-0101DSFP User manual

Lantech

Lantech Treo 500 User manual

Lantech

Lantech mini Switch 800 User manual

Lantech

Lantech IPGS-0005T-4 User manual

Lantech

Lantech LGS-1104 User manual

Lantech

Lantech IPWMR-3204DF User manual

Lantech

Lantech LPGS-2424C Series User manual

Lantech

Lantech IPES-5416T Series User manual

Lantech

Lantech IPGS-5424 User manual

Lantech

Lantech IPES-0005B Series User manual

Lantech

Lantech IES-5416DF Series User manual

Lantech

Lantech IES-3208C User manual

Lantech

Lantech IES-0005B Series User manual

Lantech

Lantech IGS-L5408MGSFPR-AC User manual

Lantech

Lantech IPES-5408T-43 User manual

Lantech

Lantech IES-0008-M12 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual