Lantech IPES-0208 Series User manual

IPES/IES-0208 Series

8 10/100TX+ 2 10/100/1000T or 1000FX (w/8 PoE at/af) IP67/IP54

rated Industrial Unmanaged Switch

User Manual

IPES-0208GF-67

IPES-0208T-67

Aug 2021

Recommendation for Shielded network cables

STP cables have additional shielding material that is used to reduce external interference.

The shield also reduces the emission at any point in the path of the cable. Our

recommendation is to deploy an STP network cable in demanding electrical environments.

Examples of demanding indoor environments are where the network cable is located in

parallel with electrical mains supply cables or where large inductive loads such as motors

or contactors are in close vicinity to the camera or its cable. It is also mandatory to use an

STP cable where the power device (like IP camera) is used outdoors or where the network

cable is routed outdoors.

Important Notice

Lantech Communications Global, Inc. reserves the right to modify the

equipment, its specification or this manual without prior notice, in the interest

of improving performance, reliability, or servicing. At the time of publication

all data is correct for the operation of the equipment at the voltage and/or

temperature referred to. Performance data indicates typical values related to

the particular product.

No part of this documentation or information supplied may be divulged to any

third party without the express written consent of Lantech Communications

Global Inc. Products offered may contain software which is proprietary to

Lantech Communications Global Inc. The offer or supply of these products

and services does not include or infer any transfer of ownership.

Interference Issues

This Equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

commercial or industrial installation. This equipment generates, uses, and

can radiate radio frequency energy. It may cause harmful interference to

radio communications if the equipment is not installed and used in

accordance with the instructions.

FCC Warning

This Equipment has been tested and found to comply with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy. It may cause harmful interference to radio

communications if the equipment is not installed and used in accordance

with the instructions. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Content

Chapter 1 Introduction.............................................5

Chapter 2 Hardware Description ............................6

2.1 Physical Dimension........................................ 6

2.2 Package Content:........................................... 8

2.3 IP Protection................................................... 8

2.4 LED Indicators.............................................. 11

Chapter 3 Hardware Installation...........................12

Chapter 1 Introduction

Lantech IPES-0208 series are 8 10/100 Base-TX+ 2 10/100/1000T or 1000FX or 100FX

(w/8 PoE at/af injectors) with M12-connctor unmanaged industrial switches for IP67 or

IP54 rated protection, which meets the high reliability requirements demanded by

industrial rolling stock applications.

Model List:

IPES-0208GF

8 10/100TX + 2 1000FX w/ 8 PoE at/af Industrial Unmanaged

Switch

IES-0208GF

8 10/100TX + 2 1000FX Industrial Unmanaged Switch

IPES-0208T

8 10/100TX + 2 10/100/1000T w/ 8 PoE at/af Industrial

Unmanaged Switch

IES-0208T

8 10/100TX + 2 10/100/1000T Industrial Unmanaged Switch

Chapter 2 Hardware Description

In this paragraph, it will describe the Industrial switch’s hardware spec, port, cabling

information, and wiring installation.

2.1 Physical Dimension

Aluminum case. IP-67,

IPES-0208GF

215mm(W)x185mm(H)x91.2mm(D)

IES-0208GF

215mm(W)x192.5mm(H)x76.7mm(D)

IPES-0208T

215mm(W)x185mm(H)x91.2mm(D)

IES-0208T

215mm(W)x185mm(H)x71mm(D)

Aluminum case. IP-54,

IPES-0208GF

182mm(W)x179mm(H)x91mm(D)

IES-0208GF

182mm(W)x179mm(H)x76.5mm(D)

IPES-0208T

182mm(W)x179.5mm(H)x91mm(D)

IES-0208T

182mm(W)x180.3mm(H)x77.3mm(D)

Port description of IP67-rated switch

**The port description of IP54 model is the same as of IP67 one.

2.2 Package Content:

Industrial Switch

Quick Installation Guide (available since Jan 2017)

2.3 IP Protection

The IP Code, Ingress Protection Rating, sometimes also interpreted as International

Protection Rating, classifies and rates the degree of protection provided against the

intrusion (including body parts such as hands and fingers), dust, accidental contact, and

water in mechanical casings and with electrical enclosures. It is published by the

International Electrotechnical Commission (IEC)

Solid particle protection

The first digit indicates the level of protection that the enclosure provides against access

to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid

foreign objects.

Level

Object size

protected against

Effective against

—

No protection against contact and ingress of objects

>50 mm

Any large surface of the body, such as the back of a

hand, but no protection against deliberate contact

with a body part

>12.5 mm

Fingers or similar objects

>2.5 mm

Tools, thick wires, etc.

>1 mm

Most wires, screws, etc.

Dust protected

Ingress of dust is not entirely prevented, but it must

not enter in sufficient quantity to interfere with the

satisfactory operation of the equipment; complete

protection against contact

Dust tight

No ingress of dust; complete protection against

contact

Liquid ingress protection

The second digit indicates the level of protection that the enclosure provides against

harmful ingress of water.

Level

Protected

against

Testing for

Details

Not

protected

—

Dripping

water

Dripping water (vertically

falling drops) shall have no

harmful effect.

Test duration: 10 minutes

Water equivalent to 1 mm

rainfall per minute

Dripping

water when

tilted up to

15°

Vertically dripping water

shall have no harmful effect

when the enclosure is tilted

at an angle up to 15°from

its normal position.

Test duration: 10 minutes

Water equivalent to 3 mm

rainfall per minute

Spraying

water

Water falling as a spray at

any angle up to 60°from

the vertical shall have no

harmful effect.

Test duration: 5 minutes

Water volume: 0.7 litres per

minute

Pressure: 80–100 kPa

Splashing

of water

Water splashing against

the enclosure from any

direction shall have no

harmful effect.

Test duration: 5 minutes

Water volume: 10 litres per

minute

Pressure: 80–100 kPa

This manual suits for next models

Table of contents

Other Lantech Switch manuals

Lantech

Lantech IES-2208C User manual

Lantech

Lantech IES-0208CA User manual

Lantech

Lantech IPES-0005B Series User manual

Lantech

Lantech IPGS-5400-2P User manual

Lantech

Lantech IPES-0008A Series User manual

Lantech

Lantech IPES/IES-0008B Series User manual

Lantech

Lantech IPES/IES-5416DFT Series User manual

Lantech

Lantech IGS-0008A User manual

Lantech

Lantech IES-5408T User manual

Lantech

Lantech IPGS-0016 User manual

Lantech

Lantech IPES-5222T Series User manual

Lantech

Lantech IES-2008B-DNV User manual

Lantech

Lantech IES-0008-M12 User manual

Lantech

Lantech IPGS-0204DSFP-12V User manual

Lantech

Lantech IPES-5208T-X Series User manual

Lantech

Lantech 2204F Series User manual

Lantech

Lantech IPGS-5 Series User manual

Lantech

Lantech IPES-5416DF Series User manual

Lantech

Lantech IPES-2208CA User manual

Lantech

Lantech IPGS-5008T Series User manual

Lantech

Lantech IPES-5408T-43 User manual

Lantech

Lantech IPGS-0204DSFP User manual

Lantech

Lantech IPES-0008A-12V User manual

Lantech

Lantech LES-2400-RPS User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual