La Crosse Technology WS-8008U-IT User manual
Model: WS-8008U-IT
Instruction Manual
DC: 080517
Atomic Digital Wall Clock with
Indoor Temperature & Perpetual Calendar
Table of Contents
Let’s Get Started
Buttons
Basic Settings
Time Zone
Fahrenheit | Celsius
Alarm Time
Activate | Deactivate Alarm
Snooze
Reset Button
Help Us, Help You
Let’s Get Social
Care and Maintenance
Specifications
Warranty and Support
FCC Statement
2
3
3
4
5
5
6
6
6
7
7
7
8
8
9
Welcome to the La Crosse Technology® family!
We hope you enjoy your new Atomic Clock.
Page | 1 www.lacrossetechnology.com/support WS-8008U-IT
Lets Get Started
AA
AA
1. Insert 2 AA batteries into your clock.
2. Configure basic settings.
Wall Hang
Pullout legs
Important:
The clock will look for the Atomic time signal for 7 minutes
when batteries are first installed. Buttons will not function
during the Atomic time signal search.
Options:
• Press the WWVB SEARCH button once to stop the Atomic
time signal search.
• Manually set the time, date, and time zone.
• The clock will search for the Atomic time signal again after
midnight.
• Press WWVB SEARCH button anytime, to start an Atomic
signal search.
• For information about WWVB visit: http://bit.ly/AtomicTime
WS-8008U-IT www.lacrossetechnology.com/support Page | 2
Basic Settings
• Hold the SET button to enter time set mode.
• Press the ARROW buttons to adjust values.
• Press SET to confirm adjustments and move to next item.
Settings order:
1. 12/24 Hour Format
2. Hour
3. Minutes
4. Year
5. Month,
6. Date
7. Daylight Saving Indicator (ON to automatically change)
Press SET to exit, or wait 30 seconds without pressing buttons
to return to the normal time display.
Buttons
Page | 3 www.lacrossetechnology.com/support WS-8008U-IT
12/24 Hour Time Hour Minutes
Year Month Date
DST Indicator
P
DST
AM
P
AM
P
AM
P
AM
P
Time Zone
PM
CE
• This clock has four time zones to choose from.
• The default time zone is Pacific (P)
• Press the ZONE button to select your time zone.
o P = Pacific
o M = Mountain
o C = Central
o E = Eastern
WS-8008U-IT www.lacrossetechnology.com/support Page | 4
Alarm Time
1. Hold the ALARM button for 3 seconds until the seconds are
replaced by the letters “AL”.
2. The alarm hour will flash.
3. Use the ARROW buttons to set the hour.
4. Press the ALARM button once. The alarm minutes will flash,
5. Use the ARROW buttons the set the minutes.
6. Press the ALARM button to confirm and exit.
• Press the ºF/ºC button to switch from Fahrenheit to Celsius
temperature display.
P
P
Fahrenheit | Celsius
P
AM P
AM
P
Page | 5 www.lacrossetechnology.com/support WS-8008U-IT
Activate/Deactivate Alarm
Setting the alarm time and activating the alarm are separate
steps.
1. Press the ALARM button to activate the alarm.
2. Press the ALARM button again to deactivate the alarm.
3. The alarm icon (bell) will appear when active.
4. The alarm icon (bell) will disappear when inactive.
Snooze
• Press SNOOZE to silence an active alarm for 5 minutes.
• The alarm icon will flash.
• This is a crescendo alarm that will sound for 120 seconds
unless deactivated.
• Press any button to stop the alarm for 24 hours.
Reset Button
• If the atomic clock display appears distorted or is not
responding to buttons, use a pen or paper clip to press
RESET one time.
• This will reset the atomic clock to default settings.
WS-8008U-IT www.lacrossetechnology.com/support Page | 6
Page | 7 www.lacrossetechnology.com/support WS-8008U-IT
Let’s Get Social
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and
provide feedback on our social media outlets!
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Ensure the batteries are installed with correct polarity ( + and - ).
• Remove batteries from equipment when it is not to be used for an
extended period of time.
• Promptly remove expired batteries.
Care and Maintenance
If you have ideas for features or support solutions you’d like
to see us make, please let us know! We truly want to make
owning a La Crosse Technology product not only a practical
experience, but also a fun one.
So email us at: store@lacrossetechnology.com
Help Us, Help You!
Specifications
La Crosse Technology, Ltd. provides a 1-year limited time
warranty (from date of purchase) on this product relating to
manufacturing
defects in materials & workmanship.
Before returning a product, please contact our friendly cus-
tomer support or visit our online help:
Phone: 1-608-782-1610
Online: www.lacrossetechnology.com/support
Warranty and Support
WS-8008U-IT www.lacrossetechnology.com/support Page | 8
Temperature
Power
Dimensions
Indoor Range: 14.1°F to 139.9°F
(-9.9°C to 59.9°C)
Clock: 2 AA, LR6, IEC batteries
Batteries not included
Battery Life: Up to 24 months with alkaline batteries
Clock: 9.22” L x 1.10” W x 7.38” H
(23.44 L x 18.74 H x 2.81 W cm)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized changes or modifications to this equipment. Such changes or
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or
duplicated or processed using electronic, mechanical or chemical process without
the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is
regularly checked and corrections are included in subsequent editions. We
disclaim any responsibility for any technical error or printing error, or their
consequences.
All trademarks and patents are recognized.
FCC Statement
Page | 9 www.lacrossetechnology.com/support WS-8008U-IT
Other manuals for WS-8008U-IT
1
Table of contents
Other La Crosse Technology Clock manuals
La Crosse Technology
La Crosse Technology WS-6003U User manual
La Crosse Technology
La Crosse Technology WT-312Bx1 User manual
La Crosse Technology
La Crosse Technology 404-1235UA-SS User manual
La Crosse Technology
La Crosse Technology WT-8112U User manual
La Crosse Technology
La Crosse Technology Sagebrook 404-3015CC User manual
La Crosse Technology
La Crosse Technology K86302 User manual
La Crosse Technology
La Crosse Technology 404-1220 User manual
La Crosse Technology
La Crosse Technology WS-8016U User manual
La Crosse Technology
La Crosse Technology WS-8115U User manual
La Crosse Technology
La Crosse Technology 616-1410B User manual
La Crosse Technology
La Crosse Technology WT-8005U User manual
La Crosse Technology
La Crosse Technology WS-6118AL-IT User manual
La Crosse Technology
La Crosse Technology C86279 Dimensions
La Crosse Technology
La Crosse Technology 512A-811 User manual
La Crosse Technology
La Crosse Technology WS-6118 User manual
La Crosse Technology
La Crosse Technology WT-3161WHx1 User manual
La Crosse Technology
La Crosse Technology 404-3556A Dimensions
La Crosse Technology
La Crosse Technology WS-7098U User manual
La Crosse Technology
La Crosse Technology WT-3141b Manual
La Crosse Technology
La Crosse Technology KWS-8140-BK User manual
Popular Clock manuals by other brands
Silicon Laboratories
Silicon Laboratories SI5324 manual
Heathkit
Heathkit GC-1005 Assembly manual
Oregon Scientific
Oregon Scientific PRYSMA RMR221P manual
Andrew O'Malley
Andrew O'Malley DOTKLOK Assembly instructions
ALGE-Timing
ALGE-Timing ASC3 manual
Bodet
Bodet Profil 960 Installation and operating instructions
