La Crosse Technology BBB87269 User manual

Model: BBB87269

Instruction Manual

DC:102015

Atomic Digital Wall Clock

Table of Contents

Welcome ...........................................................................

Get Started ........................................................................

Button Functions ................................................................

Settings: Time, Date, etc. ....................................................

Time Zone Settings and 12/24 Hour Time ...............................

Set Time Alarm ..................................................................

Activate/Deactivate Alarm ....................................................

Snooze ..............................................................................

Reset Button ......................................................................

Care and Maintenance .........................................................

Specifications .....................................................................

Warranty and Support .........................................................

FCC Statement ...................................................................

Canada Statement ..............................................................

Welcome!

Thank you for purchasing the Atomic Digital Wall Clock, designed for

years of trouble free performance. Please read this important note

about setup. Thank you!

IMPORTANT:

After installing batteries, the clock will look for the Atomic time signal

for 10 minutes. The buttons will not function during the signal search.

Options:

• Hold the Atomic Search button for 5 seconds to stop the

Atomic signal search.

• Manually set the time, date, and time zone.

• The clock will search for the Atomic time signal again after

midnight.

• Press Atomic Search button anytime, to start an Atomic signal

search.

For information about Atomic Time, visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

Get Started

1. Insert 3 new “C” Alkaline batteries into the clock. Observe the

correct polarity.

2. Wait for the clock to set itself to Eastern time zone (default), then

press the ZONE button to select your time zone.

3. Stop the initial Atomic Time Search and set the time manually.

ALARM

+ C - + C - + C -

Page 1 www.lacrossetechnology.com/support BBB87269

Button Functions

ALARM

MODE/SET

Normal Time Display:

• Press and release to enter alarm mode

• Hold 5 seconds to set time

Alarm Mode:

• Hold 5 seconds to set alarm

• Press and release to conrm

ALARM

• Press and release to activate or deactivate

time alarm

+12/24

Normal Time Display:

• Press and release to select 12 hour or 24

hour time format

• Hold 5 seconds to change time zone

Time Set or Alarm Set Mode:

• Press and release to adjust value by 1

• Hold to adjust value quickly

SNOOZE

• When alarm rings, press to activate snooze

MINUS

Time Set or Alarm Set Mode:

• Press and release to adjust value by 1

• Hold to adjust value quickly

Atomic Tower Button

• Hold 5 seconds to start or stop Atomic Time

signal search

RESET

• Press once with a paper clip to return clock

to default settings

Note: When clock is searching for Atomic time and tower icon

is ashing, buttons will not function. Hold the Tower button for

5 seconds to stop the search, so buttons can be used.

BBB87269 www.lacrossetechnology.com/support Page | 2

Set Year and Date Format (Month/Day) or (Day/Month)

Settings: Time, Date, etc.

• Hold the MODE/SET button to enter time set mode.

• Press the +/12/24 or -buttons to adjust values.

• Press MODE/SET to conrm adjustments and move to next item.

Settings order:

1. Hour, 2. Minutes, 3. Seconds, 4. Year, 5. Month/Date format (M/D

or D/M), 6. Month, 7. Date, 8. DST indicator

Press MODE/SET to exit, or wait 30 seconds without pressing buttons

to return to the normal time display.

Set Hours, Minutes and Seconds

Set Month and Date

Page 3 www.lacrossetechnology.com/support BBB87269

Select Daylight Saving Time (DST) Indicator ON/OFF

Time Zone and 12/24 Hour Time Format

1. Hold the +12/24 button to select the time zone.

2. There are four time zones:

• P = Pacic

• M = Mountain

• C = Central

• E = Eastern

1. Press the + 12/24 button to select 12 hour or 24 hour time format.

2. Default is 12 hour time.

3. With 24 hour time AM/PM will not display.

Select 12 Hour Time or 24 Hour Time

Select Time Zone

BBB87269 www.lacrossetechnology.com/support Page | 4

12 Hour Time 24 Hour Time

1. Press the MODE/SET button to enter Alarm Mode.

2. AL will show in place of the seconds..

3. Hold the MODE/SET button to enter alarm set mode.

4. Press the +/12/24 or -buttons to adjust a hour.

5. Press the MODE/SET button to conrm and move to the minutes.

6. Press the +/12/24 or -buttons to adjust the minutes.

7. Press the MODE/SET button to conrm and exit.

Setting Order:

1. Hour

2. Minutes

Set Time Alarm

• Press the ALARM ON/OFF button to activate the alarm.

• The bell icon will appears when alarm is active.

• Press the ALARM ON/OFF button to deactivate the alarm.

• The bell icon will disappear.

• When the alarm sounds, press the SNOOZE button to trigger snooze

alarm for 5 minutes.

• The snooze icon Zz will ash above the time.

• If the clock display appears distorted or is not responding to buttons,

use a pen or paper clip to press RESET one time.

• This will reset the clock to default settings.

Set Alarm Hour and Minutes

Activate/Deactivate Time Alarm

Snooze

Reset Clock

Page 5 www.lacrossetechnology.com/support BBB87269

La Crosse Technology, Ltd. provides a 1-year limited time warranty

(from date of purchase) on this product relating to manufacturing

defects in materials & workmanship.

Before returning a product, please contact our friendly

customer support with questions or visit our online help:

Phone: 1-608-782-1610

Online Product Support:

www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

Warranty Address:

La Crosse Technology, Ltd

2830 S. 26th St.

La Crosse, WI 54601

Protected under U.S. Patents: RE43903

Warranty and Support

Specications

• 3-C, IEC, LR14 batteries (not included)

Battery Life • 12 months with reputable batteries brands

Dimensions • 15.65” H x 19.25” W x 1.57” D

(39.75 cm H x 48.89 cm W x 3.99 cm D)

Power

•Do not mix old and new batteries.

•Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.

•Always purchase the correct size and grade of battery most suitable for

intended use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior to battery

installation.

•Ensure the batteries are installed with correct polarity (+ and -).

•Remove batteries from equipment which is not to be used for an extended

period of time.

•Promptly remove expired batteries.

Care and Maintenance

BBB87269 www.lacrossetechnology.com/support Page | 6

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna

or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modications to this equipment. Such modications could void the user

authority to operate the equipment.

duplicated or processed using electronic, mechanical

or chemical process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly

checked and corrections are included in subsequent editions. We disclaim any

responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

FCC Statement

This device complies with Industry Canada’s license-exempt RSSs.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference

that may cause undesired operation of the device.

Canada Statement

Page 7 www.lacrossetechnology.com/support BBB87269

Table of contents

Other La Crosse Technology Clock manuals

La Crosse Technology

La Crosse Technology WS-8117U-IT User manual

La Crosse Technology

La Crosse Technology 404-3556A User manual

La Crosse Technology

La Crosse Technology 404-1220v2 User manual

La Crosse Technology

La Crosse Technology WT-3122A User manual

La Crosse Technology

La Crosse Technology WT-3129S User manual

La Crosse Technology

La Crosse Technology WS-8001UM User manual

La Crosse Technology

La Crosse Technology 515-1419 Dimensions

La Crosse Technology

La Crosse Technology 404-1246 Dimensions

La Crosse Technology

La Crosse Technology 513-1417V2 Dimensions

La Crosse Technology

La Crosse Technology 513-1419 Dimensions

La Crosse Technology

La Crosse Technology 513-1211 Dimensions

La Crosse Technology

La Crosse Technology W86111V2 User manual

La Crosse Technology

La Crosse Technology 513-1919 User manual

La Crosse Technology

La Crosse Technology WS-6118 User manual

La Crosse Technology

La Crosse Technology WT-3102B User manual

La Crosse Technology

La Crosse Technology W85746-BHG User manual

La Crosse Technology

La Crosse Technology WT-3129BX1 Dimensions

La Crosse Technology

La Crosse Technology WT-3161WHx1 User manual

La Crosse Technology

La Crosse Technology 513-1417ALv4 User manual

La Crosse Technology

La Crosse Technology 404-3840FL User manual

La Crosse Technology

La Crosse Technology 513-1311OT Dimensions

La Crosse Technology

La Crosse Technology 404-4450 User manual

La Crosse Technology

La Crosse Technology WS-8120U User manual

La Crosse Technology

La Crosse Technology W86531 User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

Sharp

Sharp SPC900 instruction manual

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual

IKEA

IKEA ROTBLÖTA manual

U-Line

U-Line Н-2811 instructions

Digiview

Digiview RC305EL user manual