La Crosse Technology 513-1211 User manual

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 1

Model: 513-1211.513-1211A

Instruction Manual

DC: 081114

ATOMIC DIGITAL CLOCK

FRONT

VIEW

FOLDOUT

LEG

STAND

Battery

Compartment

3 “AA”

Time + Alarm

Calendar + Indoor Temperature

BACK

VIEW

TIME ZONE

SELECTOR

BUTTONS

Time Zone Indicator

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 2

TIME ZONES

PST Pacific

MST Mountain

CST Central

EST Eastern

GET STARTED

Step 1: Use the time zone selector (on back) to choose your time zone.

Step 2: Insert 3 new AA batteries (not included) into the clock. Observe the

correct polarity.

Restart: If there is no indoor temperature data after 60 seconds, remove

batteries from the clock and press a button 20 times. After15 minutes, return to

Step 1 above.

SET TIME, DATE AND TEMPERATURE

1. Hold the SET button to enter time set mode.

2. Press the WAVE/+ or DST/- buttons to adjust values.

3. Press the SET button to confirm and move to the next item.

TIME SET ORDER:

1. 12/24 hour time format

2. Hour

3. Minutes

4. Year

5. Month

6. Date

Press the SET button to exit, or wait 20 seconds without pressing buttons to

return to the normal time display.

DAYLIGHT SAVING TIME SETTING

Hold the DST button for 3 seconds to select DST on or off.

The DST icon DST appears in above the seconds when DST is on.

TIME ZONE SELECTION

Slide the time zone selector bar on the back of the clock to

choose the time zone for your area.

FAHRENHEIT/CELSIUS

Hold the °C/°F button for 3 seconds to select Fahrenheit or Celsius

temperature readings.

SET TIME ALARM

Press the SET button once to enter Alarm Mode. The letters AL will show in the

seconds display.

1. Hold the SET button for 3 seconds to enter alarm time set

mode.

2. Press the WAVE/+ or DST/- buttons to adjust values.

3. Press the SET button to confirm and move to the next item.

Alarm Time setting order: 1. Hours, 2. Minutes

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 3

Alarm

Bell Icon

Snooze

Icon

ACTIVATE/DEACTIVATE TIME ALARM

Press the SET button once to view alarm time.

 Press the WAVE/+ or DST/- buttons to activate the alarm.

Once activated, the bell icon appears.

Press the WAVE/+ or DST/- buttons to deactivate the alarm.

The bell icon will disappear.

SNOOZE (SILENCES ALARM TEMPORARILY)

When alarm sounds, press the SNOOZE button to silence the

alarm for 5 minutes. The alarm icon will flash.

In snooze mode, press any button to stop alarm for one day.

Note: The alarm will sound for 2 minutes and then shut off completely.

MANUAL WWVB RADIO-CONTROLLED (ATOMIC) TIME SEARCH

Press the WAVE/+ button to start or stop a manual signal search. WWVB

Icon will flash when searching.

For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

ATOMIC SIGNAL SEARCH: The clock will search every 2 hours until the WWVB

time signal is received. After reception, this clock will only search for the atomic

signal after midnight.

ATOMIC CLOCK CARE AND MAINTENANCE

Do not mix old and new batteries

Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

Always purchase the correct size and grade of battery most suitable for intended use.

Replace all batteries of a set at the same time.

Clean the battery contacts and also those of the device prior to battery installation.

Ensure the batteries are installed with correct polarity (+and -).

Remove batteries from equipment which is not to be used for an extended period.

Remove expired batteries promptly.

Do not expose to extreme temperature, vibration or shock.

Clean with a soft damp cloth. Do not use solvents or scouring agents.

The clock is not a toy. Keep it out of reach of children.

The clock is not to be used for medical purpose or for public information. It is intended

for home use only.

The specs of this clock may change without prior notice.

Improper use or unauthorized opening of housing voids warranty.

If the clock is not working properly, change the batteries.

SPECIFICATIONS

Temperature Range: +14 to +122 °F (-10 to +50 °C)

Power: 3-AA, IEC, LR6 batteries (not included)

Dimensions: 10.75" x 1.38" x 16.75" (273.05 x 30.052 x 425.45 mm)

WWVB

Atomic Icon

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 4

LOW BATTERY ICONS

When the icon is displayed, replace batteries in the clock.

WARRANTY AND SUPPORT INFORMATION

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase)

on this product relating to manufacturing defects in materials & workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other information contact:

La Crosse Technology, Ltd

2830 South 26th St

La Crosse, WI 54601

Contact Support: Online Product Support:

1-888-211-1923 www.lacrossetechnology.com/support

Product Registration: Protected under U.S. Patents:

www.lacrossetechnology.com/support/register 5,978,738 | 6,076,044 | RE43903

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or

transmitter. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user

authority to operate the equipment.

duplicated or processed using electronic, mechanical or chemical process without the

written permission of the publisher. This booklet may contain errors or misprints. The

information it contains is regularly checked and corrections are included in subsequent

editions. We disclaim any responsibility for any technical error or printing error, or their

consequences.

All trademarks and patents are recognized.

Low Battery

Icon

Other manuals for 513-1211

This manual suits for next models

Table of contents

Other La Crosse Technology Clock manuals

La Crosse Technology

La Crosse Technology WS-8418U-IT User manual

La Crosse Technology

La Crosse Technology C86279v4 User manual

La Crosse Technology

La Crosse Technology WS-6003U User manual

La Crosse Technology

La Crosse Technology WS-8001U User manual

La Crosse Technology

La Crosse Technology BBB87740 User manual

La Crosse Technology

La Crosse Technology 513-1417v3 User manual

La Crosse Technology

La Crosse Technology 513-1918S User manual

La Crosse Technology

La Crosse Technology WS-8011UM-TWC User manual

La Crosse Technology

La Crosse Technology WT-3143 User manual

La Crosse Technology

La Crosse Technology 404-3451 User manual

La Crosse Technology

La Crosse Technology 513-1419v4-WA User manual

La Crosse Technology

La Crosse Technology 404-3030W User manual

La Crosse Technology

La Crosse Technology WS-6118 User manual

La Crosse Technology

La Crosse Technology Clock User manual

La Crosse Technology

La Crosse Technology 513-1918B User manual

La Crosse Technology

La Crosse Technology WT-3181PL-Q User manual

La Crosse Technology

La Crosse Technology BBB87740x1 User manual

La Crosse Technology

La Crosse Technology WT-3129BX1 Dimensions

La Crosse Technology

La Crosse Technology 513-1417v6 User manual

La Crosse Technology

La Crosse Technology W79752 User manual

La Crosse Technology

La Crosse Technology WS-8120U User manual

La Crosse Technology

La Crosse Technology BBB86118v3 User manual

La Crosse Technology

La Crosse Technology W85961 User manual

La Crosse Technology

La Crosse Technology T73743 User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

Sharp

Sharp SPC900 instruction manual

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual

IKEA

IKEA ROTBLÖTA manual

U-Line

U-Line Н-2811 instructions

Digiview

Digiview RC305EL user manual