La Crosse Technology 513-1918S User manual

ATOMIC DIGITAL CLOCK 1 | PAGE

ATOMIC DIGITAL WALL CLOCK

INSTRUCTION MANUAL

MODEL: 5131918S

DC: 090919

ATOMIC DIGITAL CLOCK 2 | PAGE

TABLE OF CONTENTS

3. Power Up

3. Custom Date Display

4. Settings Menu

5. Daylight Saving Time Options

5. Atomic Time

6. Time Alarm

•Set Alarm

•Activate/Deactivate Alarm

•Snooze Alarm

6. Outdoor Sensor Reception

7. Factory Restart

7. Low Battery Indicators

7. Sensor Weather Shield

7. We’re Here to Help!

7. Join the Conversation

8. Speciﬁcations

8. Care and Maintenance

8. Warranty Info

9. FCC Statement

ATOMIC DIGITAL CLOCK 3 | PAGE

POWER UP

1. Insert 2-AA batteries into your Outdoor Sensor.

2. Insert 3-AAA batteries into your Digital Clock.

3. Once the Outdoor Sensor is reading to your clock, place it outside in a shaded location to protect it from

the sun’s heat.

Watch sensor mounting video: bit.ly/TH_SensorMounting

Outdoor Sensor

TX191

Digital Clock

513-1918S

AAA

CUSTOM DATE DISPLAY

Choose to display the Full Weekday or Weekday with Month and Date.

Simply press the SET button to select you desire display.

ATOMIC DIGITAL CLOCK 4 | PAGE

SETTINGS

1. Hold the SET button to enter the Settings Menu.

2. Use the + or - button to adjust values.

3. Press the SET button to confirm and move to next item.

Settings Menu Order:

• Language English | Spanish

• Beep ON | OFF

• Atomic ON | OFF

• Daylight Saving Time

- DST AUTO ON (Gain 1 hour in spring, lose 1 hour in fall)

- DST OFF (Remain in Standard Time all year long)

- DST ON (Remain in Daylight Saving Time all year long)

• Time Zone

• Hour

• Minutes

• Year

• Month

• Date

• Fahrenheit | Celsius

Atomic OFF: When OFF is selected the next step will be the Hour setting.

Language: Whichever language is selected, the following instructions and weekday will be presented in that

language.

Weekday: Weekday will set automatically when Year, Month and Date are set.

TIME ZONES

AST = Atlantic

EST = Eastern

CST = Central

MST = Mountain

PST = Paciﬁc

AKT = Alaska

HAT = Hawaii

LANGUAGE BEEP SOUND ON/OFF ATOMIC TIME SIGNAL ON/OFF

DAYLIGHT SAVING TIME TIME ZONE

ATOMIC DIGITAL CLOCK 5 | PAGE

ATOMIC TIME

HOUR MINUTES YEAR

MONTH DATE FAHRENHEIT/CELSIUS

• Your Clock will automatically search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.

• Press the PLUS (+) button to manually start or stop search for the WWVB Atomic Time Signal.

• While searching, the Tower Icon will ﬂash. The Tower Icon will be solid when the WWVB Signal is

received by your clock.

• For information about WWVB Atomic Time visit: bit.ly/AtomicTime

DAYLIGHT SAVING TIME OPTIONS

Some states are considering going to year around Daylight Saving Time. We have built in options to

accommodate this feature into the program menu.

DST AUTO ON: Your clock will automatically move 1 hour ahead in the spring and move one hour back in

the fall when it receives the signal from the Atomic Clock to change.

DST OFF: This is for areas who do not move forward one hour in the spring. Select DST OFF to remain in

Standard Time all year.

DST ON: This is for areas who do not move backward one hour in the fall. Select DST ON to remain in

Daylight Saving Time all year.

ATOMIC DIGITAL CLOCK 6 | PAGE

TIME ALARM

Set Time Alarm

1. Hold the ALARM button 2 seconds to enter settings mode.

2. Press the + or - button to adjust the ﬂashing values.

3. Hold the + or - buttons to adjust quickly.

4. Press the ALARM button to conﬁrm adjustments and move to the next item.

5. Press the SNOOZE button at any time to exit.

Activate/Deactivate Time Alarm

• The alarm is active when set.

• From normal time display, press and release the ALARM button to deactivate or activate the alarm. The

alarm time will show for 2 seconds.

• Alarm icon (bell) will show then active.

Snooze Alarm

• When alarm sounds, press the SNOOZE button to silence alarm for 10 minutes.

• The alarm icon (bell) will ﬂash

• Press any button except SNOOZE to silence the alarm for 24 hours

OUTDOOR SENSOR RECEPTION

• If sensor loses connection to the weather station for any reason, the weather station will show NO after 30

minutes.

• The weather station will search for 3 minutes every hour to reconnect with sensor.

• Hold the PLUS (+) button 3 seconds to search for the outdoor sensor.

• Reception Icon will ﬂash while searching for sensor. Outdoor sensor area will show dashes during the

search.

• When sensor is received the icon will be solid.

• If no sensor received, the icon will disappear after 3 minutes of searching if sensor is not found. NO will

again show in the outdoor sensor area.

ATOMIC DIGITAL CLOCK 7 | PAGE

Factory Restart:

When the outdoor readings show NO and searching for the sensor has not helped, complete a full restart:

1. Bring the sensor in the house about ﬁve feet from the clock.

2. Remove batteries from the sensor, and from the clock

3. Press any button 20 times.

4. After 15 minutes, insert batteries into the sensor, and into the clock.

5. Wait another 15 minutes to establish a strong connection. Place sensor outside in shaded location.

FACTORY RESTART

SENSOR WEATHER SHIELD

• The Sensor Weather Shield (sold separately) is designed to protect your outdoor sensor

from rain and snow.

• This shield will oer limited protection from the sun’s heat.

• Optional purchase at: bit.ly/925-1418

If you require additional support, get in touch with our friendly customer support team based out of La

Crosse, WI.

Phone: 1-608-782-1610

Online: bit.ly/contact_techsupport

Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.

WE’RE HERE TO HELP!

JOIN THE CONVERSATION

LOW BATTERY INDICATORS

• A Low Battery Indicator between the Outdoor Temperature/Humidity means you need to replace the

batteries in your sensor.

• A Low Battery Indicator by the time means you need to replace the batteries in your station.

Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!

ATOMIC DIGITAL CLOCK 8 | PAGE

SPECIFICATIONS

CARE AND MAINTENANCE

• Do not mix old and new batteries.

• Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.

• Always purchase the correct size and grade of battery most suitable for intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to battery installation.

• Ensure the batteries are installed with correct polarity (+ and -).

• Remove batteries from equipment which is not to be used for an extended period of time.

• Promptly remove expired batteries.

Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)

Update Interval: About every minute.

Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)

Transmission Range: Over 330 ft. (100 meters) RF 433MHz (open air)

Update Interval: About every minute.

Power Requirements:

513-1918S: 3 “AAA” batteries (sold separately)

TX191: 2 “AA” batteries (sold separately)

Battery Life:

513-1918S: Over 18 months

TX191: Over 18 months

Dimensions:

513-1918S: 8.97” W x 0.94” D x 7.12” H (22.78 W x 2.38 D x 18.08 H cm)

TX191: 1.57” W x 0.95” D x 4.49” H (3.98 L x 2.41 W x 11.40 H cm)

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product

relating to manufacturing defects in materials & workmanship.

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

WARRANTY INFO

ATOMIC DIGITAL CLOCK 9 | PAGE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1 ) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications

to this equipment. Such modifications could void the user authority to operate the equipment.

processed using electronic, mechanical or chemical process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and

corrections are included in subsequent editions. We disclaim any responsibility for any technical error or

printing error, or their consequences.

All trademarks and patents are recognized.

WARNING: This product can expose you to chemicals including styrene, which is known to the State of

California to cause cancer. For more information go to: www.P65Warnings.ca.gov

FCC STATEMENT

Other manuals for 513-1918S

Table of contents

Other La Crosse Technology Clock manuals

La Crosse Technology

La Crosse Technology C86279 Operating and maintenance manual

La Crosse Technology

La Crosse Technology WT-8008U User manual

La Crosse Technology

La Crosse Technology 513-1429TH Dimensions

La Crosse Technology

La Crosse Technology W88631 User manual

La Crosse Technology

La Crosse Technology 512-1422 Series Dimensions

La Crosse Technology

La Crosse Technology 513-1419BL User manual

La Crosse Technology

La Crosse Technology WS-8117 User manual

La Crosse Technology

La Crosse Technology WT-3143A User manual

La Crosse Technology

La Crosse Technology 404-3030W User manual

La Crosse Technology

La Crosse Technology 513-1417AL User manual

La Crosse Technology

La Crosse Technology 513-1919 User manual

La Crosse Technology

La Crosse Technology 433-3256A User manual

La Crosse Technology

La Crosse Technology WT-3144S User manual

La Crosse Technology

La Crosse Technology WT-8002UV2 Dimensions

La Crosse Technology

La Crosse Technology T84220 User manual

La Crosse Technology

La Crosse Technology 83247-BHG User manual

La Crosse Technology

La Crosse Technology WS-6003U User manual

La Crosse Technology

La Crosse Technology WT-312Bx1 User manual

La Crosse Technology

La Crosse Technology 513-1211 User manual

La Crosse Technology

La Crosse Technology C86279v4 User manual

La Crosse Technology

La Crosse Technology WS-8115U User manual

La Crosse Technology

La Crosse Technology 513-1419v4-WA User manual

La Crosse Technology

La Crosse Technology BBB84022 Dimensions

La Crosse Technology

La Crosse Technology 404-3840FL User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

Sharp

Sharp SPC900 instruction manual

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual

IKEA

IKEA ROTBLÖTA manual

U-Line

U-Line Н-2811 instructions

Digiview

Digiview RC305EL user manual