La Crosse Technology 513-1417AL User manual
Setup
Power up. Insert 2-AA batteries into the sensor, then into the
clock. Observe the correct polarity.
Congure basic settings. Hold the SET button for 3 seconds to
enter settings menu. Use the +/- buttons to adjust and SET to
conrm.
AA
AA
Setting order:
1. Language: English | Español
2. Beep ON | OFF
3. Atomic ON | OFF
4. DST ON | OFF (Daylight Saving Time)
5. Time Zone
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit | Celsius
Note: When Español is selected, weekday and sub menu
instructions will be in Spanish. Calendar order: Day, Month, Year.
AA
AA
English | Español Beep ON | OFF
Atomic ON | OFF DST ON | OFF
Page | 1 www.lacrossetechnology.com/support 513-1417AL
Note: When the Atomic setting
is set to OFF, the menu will skip
to item 6, your Hour setting
All States except
Arizona must
set the DST
mode to OFF.
Time Zone Hour
AST
EST
CST
MST
PST
AKT
HAT
Atlantic
Eastern
Central
Mountain
Pacific
Alaskan
Hawaiian
Time Zone
Minutes Year
Month Date
Fahrenheit | Celsius
Atomic Time
• The station will automatically search for the atomic time signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the SET button to search manually for atomic time
signal.
• Press the SET button to select daylight saving time ON/OFF. If you
do not observe DST, use the +/- button to turn on the Daylight
Saving Time Indicator.
• For information about WWVB visit: http://bit.ly/AtomicTime
Place outdoor sensor outside in the shaded location and enjoy
your weather information.
513-1417AL www.lacrossetechnology.com/support Page | 2
Note: When setting the hour,
AM indicates times before 12:00
(noon) and PM indicates time
after 12:00 (noon).
Display icons
AM | PMLow Battery
Alarm | Snooze
Atomic Time Fahrenheit | Celsius
Trend Arrow Sensor Signal Strength
Page | 3 www.lacrossetechnology.com/support 513-1417AL
Note: If your clock advances one hour in December it is due to a leap
second adjustment that was programmed incorrectly. If this happens
your clock will automatically correct itself Jan 1st.
There are two easy ways to immediately correct the hour.
1.Use the setting menu to select DST OFF then set the hour back one
hour – or the clock will correct the hour overnight with the next
WWVB reception. Then in January use the setting menu to turn DST
ON and resume normal use.
2.Use the setting menu to turn WWVB OFF and set the correct hour
Either way your clock will resume normal WWVB functions Jan 1st with
the DST ON setting.
We apologize for the inconvenience caused by our programing error.
Hour Minutes
Time Alarm
Set: Hold the ALARM button for 3 seconds to enter alarm settings.
Use the +/- buttons to adjust and ALARM to conrm.
Deactivate | Activate: The alarm is active when set.
Press and release the ALARM button to deactivate or activate
the alarm. The clock icon will show when alarm is active.
Snooze: Press and release the SNOOZE button to silence the alarm
for 10 minutes. Snooze can be repeated.
HI | LO Temperature
• Press the PLUS button to view HI Temperature.
• Press again to view LO Temperature.
• Hold the PLUS button for 5 seconds to reset HI and LO
temperature.
Note: All records reset at midnight.
HI Temp LO Temp
Temperature Trend Arrows
The outdoor temperature trend indicators update every 15 minutes and
provide a 1 hour comparison of readings that took place every 15
minutes within that hour. The temperature will have to rise or fall by
2°F (1°C) or more within the hour for the arrows to change.”
Temperature rose Temperature is
unchanged
Temperature fell
513-1417AL www.lacrossetechnology.com/support Page | 4
Sensor Reception
• Hold the - button 3 seconds to search for the sensor.
• The strength signal icon will ash until the sensor signal is received
or for 3 minutes if no signal available.
• The signal will show solid when connected to the sensor.
Low Battery Icon
• Battery icon by time-Change batteries in the clock.
• Battery icon by outdoor temperature-Change batteries in the sensor.
Follow Us on Social Media
For personalized interaction
http://bit.ly/LaxTech_Facebook
Join the conversation
http://bit.ly/LaxTech__Twitter
Latest video content
http://bit.ly/LaxTech_YouTube
Pin and share
http://bit.ly/LaxTech_Pinterest
Page | 5 www.lacrossetechnology.com/support 513-1417AL
Moon Phase
The moon phase is based on the lunar calendar and the Year, Month,
and Date settings set within this clock. Most Internet moon phase
calculations are based on the lunar calendar and can be categorized
into one of the following
New
Moon
Small Waxing
Crescent
Large Waxing
Crescent
First
Quarter
Small Waxing
Gibbous
Large Waxing
Gibbous
Full
Moon
Large Waning
Gibbous
Small Waning
Gibbous
Last
Quarter
Large Waning
Crescent
Small Waning
Crescent
Mount Temperature Sensor
• Mount the outdoor sensor on a north-facing wall or in any
well-shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the forecast station is
over 300 feet (91 meters) in open air; this does not include barriers
such as walls or oors.
• Be sure the outdoor sensor is mounted vertically.
Position Clock
The clock has a pullout stand to sit on a desk or table, or openings on
the back to mount on a wall.
• For best Atomic time reception orientate the clock with the front or
the back facing Ft. Collins, Colorado.
• Choose a location 6 feet or more from electronics such as cordless
phones, gaming systems, televisions, microwaves, routers etc.
• Place within range of the outdoor sensor (300 feet open air).
Restart
When the outdoor readings show dashes:
• Bring the sensor in the house ve feet from the station.
• Remove batteries from the sensor, and the batteries from the clock.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor, and into the clock.
• Wait 15 minutes to establish a strong connection.
• Place sensor outside
Indoor
Outdoor
Range
Update
Power
Battery Life
Dimensions
32 ˚F to 122 ˚F | 0 ˚C to 50 ˚C
-40 ˚F to 140 ˚F | -40 ˚C to 60 ˚C
Over 300 ft. (91 meters) RF 433MHz (open air)
Every 58 seconds
Clock: 2 AA (LR6, IEC) batteries not included
Sensor: 2 AA (LR6, IEC) batteries not included
12 months with reputable batteries
Clock: 11.10” W x 1.14” D x 6.75” H
(28.19 W x 2.89 D x 17.15 H cm)
Sensor: 1.57” L x 0.79” W x 5.12” H
(13.0 X 3.98 X 2.0 cm)
Specications
513-1417AL www.lacrossetechnology.com/support Page | 6
Warranty and Support
Care and Maintenance
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period.
• Promptly remove expired batteries.
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of
purchase) on this product relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support or visit our
online help:
Phone: 1-608-782-1610
Online: www.lacrossetechnology.com/support
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or
modications to this equipment. Such changes or modications could void the user authority to operate the
equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission of the publisher. This booklet
may contain errors or misprints. The information it contains is regularly checked and corrections are included
in subsequent
editions. We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Canada Statement
This device complies with CNR Industry Canada license -exempt devices.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
FCC Statement
Page | 7 www.lacrossetechnology.com/support 513-1417AL
Table of contents
Other La Crosse Technology Clock manuals
La Crosse Technology
La Crosse Technology 512A-811 User manual
La Crosse Technology
La Crosse Technology WT-8002U User manual
La Crosse Technology
La Crosse Technology WT-312Bx1 User manual
La Crosse Technology
La Crosse Technology BBB87740x1 User manual
La Crosse Technology
La Crosse Technology WS-8007U-C User manual
La Crosse Technology
La Crosse Technology BBB87733 Operating and maintenance manual
La Crosse Technology
La Crosse Technology 513-1417v6 User manual
La Crosse Technology
La Crosse Technology WT-3161BKx1 User manual
La Crosse Technology
La Crosse Technology WT-3132LCD User manual
La Crosse Technology
La Crosse Technology WS-8117U-IT User manual
La Crosse Technology
La Crosse Technology 513-1311 User manual
La Crosse Technology
La Crosse Technology WS-6118AL-IT User manual
La Crosse Technology
La Crosse Technology WT-3102B User manual
La Crosse Technology
La Crosse Technology 404-3229A User manual
La Crosse Technology
La Crosse Technology WS-7098U User manual
La Crosse Technology
La Crosse Technology WS-8008U-IT User manual
La Crosse Technology
La Crosse Technology C86279V4 User manual
La Crosse Technology
La Crosse Technology WS-8117 User manual
La Crosse Technology
La Crosse Technology 433-3256A User manual
La Crosse Technology
La Crosse Technology WT-3126H Manual
Popular Clock manuals by other brands
Silicon Laboratories
Silicon Laboratories SI5324 manual
Heathkit
Heathkit GC-1005 Assembly manual
Oregon Scientific
Oregon Scientific PRYSMA RMR221P manual
Andrew O'Malley
Andrew O'Malley DOTKLOK Assembly instructions
ALGE-Timing
ALGE-Timing ASC3 manual
Bodet
Bodet Profil 960 Installation and operating instructions
