Kyocera ECOSYS FS-1350DN User manual

Installation Guide

Clearance

• Temperature: 10 to 32.5 °C (50 to 90.5 °F)

• Humidity: 15 to 80 %RH

• Power Supply: 120 V AC, 60 Hz, 7.5 A / 220 to 240 V AC, 50/60 Hz, 3.9 A

FS-1350DN

Environment

CAUTION: Be sure to provide enough space around printer. Prolonged use

without sufficient clearance may cause overheating.

300 mm (11-13/16") 300 mm (11-13/16") 200 mm (7-7/8") 500 mm (19-11/16")

Unpacking

CD-ROM Manuals and Other

Printed Materials

Printer

Power CordToner Container

Installing the Toner Container

Open the top cover. Turn the lock lever to the unlock

position.

Take the toner container from the bag.

Shake the new toner container at least

5 times as shown in the figure in order

to distribute the toner evenly inside the

container.

Turn the lock lever to the lock position.Push firmly on the top of the container

at the positions marked PUSH, until

you hear a click.

Remove the label from the toner

container.

Close the top cover.

132

6785Install the new toner container into the

printer.

200 mm

(7-7/8")

Unpack the printer and all its included

components.

Remove the packing item. Check the parts and components.

132

Important: Do not install the printer where temperature or humidity is outside the

recommended range. Print quality may suffer and there will be an increased chance of paper

jams.

Pull the paper cassette all the way out

of the printer.

Loading Paper

Fan the paper, then tap it on a level

surface to avoid media jams or skewed

printing.

Adjust the paper width guides to fit the

paper size.

Adjust the paper length guide to fit the

paper size.

Load paper in the cassette, with the

side to be printed downward.

Insert the paper cassette into the slot in

the printer. Push it straight in as far as

it will go.

Connect the power cord to the printer

and the other end into a power outlet.

Connect the printer to the PC or your

network device. Use shielded interface

cables. These cables are sold

separately.

Connecting Cables

Selecting the Message Language

To change the language, press [U]or [V]repeatedly until the message display

shows the desired language.

Press [OK]. The message language will be changed.

Refer to the Operation Guide to install the printer driver and to set network parameters.

Wait until the message display indicates MSG Language. The default message

language is English.

Important: MSG Language may not appear according to the destination.

Important: Do not exceed the upper limit

of the cassette. Otherwise, it may cause

paper jams.

Note: Remove the cap, when using the

network interface.

Turn the power switch on (|).

Important: The printer will begin replenishing the toner; this will take approximately

15 minutes.

Other manuals for ECOSYS FS-1350DN

Table of contents

Other Kyocera Printer manuals

Kyocera

Kyocera ECOSYS FS-C2126MFP User manual

Kyocera

Kyocera ECOSYS P2135dn User manual

Kyocera

Kyocera FS-3040MFP User manual

Kyocera

Kyocera FS-2020D User manual

Kyocera

Kyocera FS-2020D User manual

Kyocera

Kyocera ECOSYS P4035dn User manual

Kyocera

Kyocera FS-3750 - B/W Laser Printer User manual

Kyocera

Kyocera FS-9120DN User manual

Kyocera

Kyocera ECOSYS FS-3140MFP Installation and operation manual

Kyocera

Kyocera FS-2020D User manual

Kyocera

Kyocera FS FS-1920 User manual

Kyocera

Kyocera Ecosys FS-C5300DN User manual

Kyocera

Kyocera Ecosys P2235dw Instruction Manual

Kyocera

Kyocera TASKalfa 4820w Installation and operating manual

Kyocera

Kyocera FS-6900 User manual

Kyocera

Kyocera ECOSYS P5026cdw User manual

Kyocera

Kyocera EP C170N User manual

Kyocera

Kyocera ECOSYS M2635dw Instruction Manual

Kyocera

Kyocera Ecosys FS-C5300DN User manual

Kyocera

Kyocera ECOSYS P7035cdn User manual

Kyocera

Kyocera ECOSYS P2135dn User manual

Kyocera

Kyocera FS-C5015N Quick reference guide

Kyocera

Kyocera KM-3650W Guide

Kyocera

Kyocera TASKalfa MA3500ci User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions