Kogan KAMN34RXUSA User manual

Table of contents

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

34" WQHD CURVED 21:9 ULTRAWIDE

144Hz FREESYNC HDR GAMING MONITOR

(3440 x 1440)

KAMN34RXUSA

•Read all instructions before using the appliance and retain for reference.

•Unplug the monitor before cleaning it.

•Use a clean, slightly dampened cloth to wipe the main monitor body.

•To clean the screen, turn it off unplug it and wait for it to cool completely, then

wipe it with a dry micro-fibre cloth.

•Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.

•This monitor is designed with ventilation holes on the back of the casing. Do not

cover or block them.

•Do not insert any object or spray any liquid into the vents.

•Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat,

as well as in rooms lacking adequate ventilation.

•Do not position the monitor in unsafe locations. If the monitor falls, it may be

damaged and may injure nearby people.

•Unplug the monitor if it is not going to be used for an extended period.

•Do not place heavy objects on the monitor, its power cord or any connected cable.

•Do not open the back panel of the monitor, as it contains a high-voltage current

even when not plugged in.

The terms HDMI and HDMI High-Definition Multimedia Interface

and the HDMI Logos are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States and other

countries.

SAFETY & WARNINGS

Monitor

Stand connector

Stand base

Stand base screw

(M6 x 16mm, x1)

VESA screws (x4)

DisplayPort cable

Power cable

User guide

IN THE BOX

Monitor Controls

The control stick functions as directional input and power/OK when pressed.

1. Press and hold for 6 seconds to turn on and off.

2. With the display turned on, press to wake up the main menu for one second.

3. In the menu, press up and down to highlight an item and OK to confirm.

Press OK again to save and return to the upper menu.

OVERVIEW

Monitor Ports

2

AUDIO OUT (3.5mm)

3

DP 1.4

4

DP 1.4

5

HDMI 2.0

6

USB

Note: The USB port is for firmware update installation only and does not provide the monitor

or a connected device with USB connectivity.

1. Carefully remove the monitor, stand connector and stand base from the box.

2. Attach the stand base to the stand connector using the M6 screw provided.

STAND ASSEMBLY

WARNING: The panel of the monitor is fragile. Keep the foam underneath

the monitor screen while assembling the stand.

3. Insert the connection block into the back cabinet and push down until ﬁrmly

connected.

4. Lift monitor up straight and remove the bottom foam. Stand the monitor up on the

installed base.

Open

VESA mounting pattern 100 x 100mm, screw size M4.

1. Open the box, take out the monitor with protection form attached and gently

place it on a desktop or table. Remove the extra parts and the foam covering the

back of the monitor. Press the release button to remove the stand plate. If the

monitor was already attached to the stand, remove the stand.

2. Assemble the mount as per the instructions provided with the mount.

VESA MOUNT

Note:

VESA mount and mounting accessories are NOT included.

Stand connector

Stand base

Monitor

Button

Stand plate

Mount (not

included)

Power cable

Connect the included power cable to the monitor power port and then connect the other

end to a power outlet.

Audio out (3.5mm)

Headphones, speakers or other audio devices can be connected to the 3.5mm output on

the monitor. The monitor may need to be set as the PC’s default sound output device.

CONNECTIVITY

Power Cable

Earphones (Not

included