Kogan KAVWAC2KYA User manual
VERTICAL WINDOW AIR
CONDITIONER
(1.75KW, COOLING ONLY)
KAVWAC2KYA
Warnings
•Any person who is involved with working on or breaking into a refrigerant circuit
should hold a currently valid certificate from an industry-accredited assessment
authority. This authorises their competence to handle refrigerants safety by an
industry recognised assessment specification.
•Dispose the appliance packaging responsibly.
•The appliance shall be stored in a well-ventilated area. The size of the area
corresponds to the room area specified for operating the appliance.
•Store the appliance safely to prevent any mechanical damage.
•Ensure the following regarding the refrigerant pipes:
oThe installation of pipework shall be kept to a minimum.
oThe pipework shall be protected from physical damage and, in the case
of flammable refrigerants, shall not be installed in an unventilated space.
oCompliance with national gas regulations shall be observed.
oThe mechanical connections shall be accessible for maintenance
purposes.
oFor appliances containing flammable refrigerants, the minimum floor
area of the room shall be mentioned in the form of a table or a single
figure without reference to a formula.
•Keep any required ventilation openings clear of obstruction.
•Ensure ducts connected to the appliance does not contain a potential ignition
source.
•When the portable air conditioner or dehumidifier is turned on, the fan can work
continuously under normal conditions to provide the minimum air volume of
100m3/h even when the compressor is closed due to the temperature controller.
•Do not pierce or burn the appliance.
•Use only implements recommended by the manufacturer for defrosting or
cleaning.
•Do not perforate any of the components in the refrigerant circuit. Refrigerant gas
may be odourless.
•Maintenance and repairs requiring the assistance of other qualified personnel must
be carried out under the supervision of specialists in the use of inflammable
refrigerants.
SAFETY & WARNINGS
Appliance with R290 Refrigerant Gas
Caution: Risk of fire
•DANGER: It is hazardous for anyone other than an authorised service person to
service this appliance. In Queensland, the authorised service person MUST hold a
Gas Work Authorisation for hydrocarbon refrigerants to carry out servicing or
repairs which involve the removal of covers.
•This appliance contains approximately 150 grams of R290 refrigerant gas.
•The appliance shall be installed, operated, and stored in a room with a floor area
larger than 4 metres square.
Precautions
•This appliance is not intended for use by persons (including children) with weak
physical, sensory, or mental abilities or lack of experience and knowledge unless
their use is supervised or instructed by personnel responsible for their safety.
•Supervise children to ensure they do not play with this appliance.
•Install the appliance correctly to ensure it is at a minimum allowable distance from
the adjacent structures. See the Installation section of this user guide.
•Follow the correct wiring connection type when operating or repairing.
•Do not use the appliance in an explosion-hazardous room.
•Do not use the appliance in a corrosive environment.
•Keep the appliance upright and stable.
•Allow the appliance to dry after wet cleaning. Do not operate when wet.
•Do not use the appliance with wet hands.
•Do not spray water directly on the appliance.
•Never insert any objects or limbs into the appliance.
•Do not cover or transport the appliance during operation.
•Do not sit on the appliance.
•Do not leave the device unattended during operation.
•Electrical connections must meet technical requirements.
Note: Refer to the rating plate on your appliance to know the type of
refrigerant gas used.
•Insert the power plug into a properly secured power outlet.
•When selecting an extension cord for a power cord, pay attention to the power
input of the device, the cable length, and the intended use. Fully extend the
expansion cable. Avoid electrical overload
•Before repairing the appliance, unplug the power plug from the electrical outlet.
Hold the power plug when doing this; do not pull on the cord.
•When not using the appliance, turn off the device and unplug the power cord from
the power outlet.
•If you notice damage to the power plug or power cord, cease the use of the
appliance and contact Kogan.com
•When placing the appliance, pay attention to the minimum distance from walls
and other objects. For storage and operating conditions, see the Cleaning and
Care section of this user guide.
•Ensure that air inlets and outlets are not blocked.
•Make sure the suction side is free of dust and loose objects
•Do not remove any safety signs, stickers, or labels from the device.
•Drain the collected condensate water before transportation and storage. Do not
drink it as it is harmful to health.
Air Conditioner
1
Front Panel
2
Vertical Blade (Auto Swing)
3
Level Blade (Manually Swing)
4
Filter
5
Display Panel
6
Power Line
7
Indoor Water Hole
8
Back Panel
9
Outdoor Air Inlet
10
Outdoor Water Hole
11
Outdoor Air Outlet
12
Standard Frame
13
Chassis
OVERVIEW
Air Conditioner Window Frame
Protect Plate
Seal Sponge
Sliding Screw
Seal Rubber
Inside Frame
Dead Plate
Fix Screw
Standard Frame
Sliding Plate
Unit Fixed Screw
Unit Locker
Down Sliding Plate
Before Installation
•To avoid damage, place the unit in an upright position for at least 24 hours before
installation.
•Make sure that the air outlet and air inlet are never blocked.
•Operate the unit on a horizontal surface to avoid water leakage.
Air Conditioner Window Frame Installation Requirements
•The height of the window should be higher than 85cm.
•The window should have a groove.
•If there is no groove (e.g. wood window) contact professional people to install.
•The window height should be shorter than the max height of the frame to avoid
the appliance from falling.
INSTALLATION
•The following instruments are required:
oTape
oCross screwdriver
oScissor
•Power supply details:
oConnect to a power supply directly and do not use an extension cord.
oEnsure the plug is connected.
•Sketch the map of the frame for installation:
Installation Steps
Step 1: Choose the installation location.
Step 2: Install the air conditioner window frame.
Sliding
Locked
Screw
Standard Frame
Inside Frame
Unit Location
Fixed Screw
Protect Plate
First Groove
Inside
Outside
Note: Cover the window completely with the Standard Frame.
Note: To install the air conditioner, wait for two hours after delivery to
keep the refrigerant gas stable.
Table of contents
Other Kogan Air Conditioner manuals
Kogan
Kogan KASSDCEACLA User manual
Kogan
Kogan SMARTERHOME KAPRA14WFGA User manual
Kogan
Kogan KAPORAIR10GA User manual
Kogan
Kogan KAVWAC26YA User manual
Kogan
Kogan KAPORAIR16MA User manual
Kogan
Kogan KAPORAIR12GA User manual
Kogan
Kogan KAPORAIR12GA User manual
Kogan
Kogan KAPORAIR09A User manual
Kogan
Kogan KGNPACH34VA User manual
Kogan
Kogan SMARTERHOME KAWFPAC12YA User manual
Kogan
Kogan KAHCWDAC16A User manual
Kogan
Kogan SMARTERHOME KAWFPAC09YA User manual
Kogan
Kogan KAMINILEDACA User manual
Kogan
Kogan SMARTERHOME KASHSAC80TA User manual
Kogan
Kogan KAMINIACOA User manual
Kogan
Kogan KAACH12PORB User manual
Kogan
Kogan KAPORAIR16MA User manual
Kogan
Kogan KAACH12PORA User manual
Kogan
Kogan SMARTERHOME KASHSAC35UA User manual
Kogan
Kogan Kaporair14A User manual
Popular Air Conditioner manuals by other brands
Fujitsu
Fujitsu Inverter ASBA30JFC operating manual
Toshiba
Toshiba RAS-M10SMUV-E installation manual
Daikin
Daikin FXLQ20MAVE Operation manual
Hitachi
Hitachi RAS-E24CAK instruction manual
CIAT
CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance
Bestron
Bestron AAC6000 instruction manual
