Kodak Smile User manual

User Guide

KODAK SMILE

INSTANT DIGITAL PRINTER

Imprimante numérique instantanée

Stampante istantanea digitale

Sofortdigitaldrucker

Impresora digital instantánea

Guide de l'utilisateur

Guida utente

Benutzerhandbuch

Guía del usuario

2 | EN

EN | 3

English

Français

Italiana

Deutsche

Español

TABLE OF CONTENTS

TABLE DES MATIÈRES  INDICE  INHALTSVERZEICHNIS  TABLA DE CONTENIDO

4 | EN

INTRODUCTION

Thank you for purchasing the KODAK SMILE

Instant Digital Printer. This User Guide is

intended to provide you with guidelines to

ensure that operation of this product is safe

and does not pose risk to the user. Any use

that does not conform to the guidelines

described in this User Guide may void the

limited warranty.

Please read all directions before using the

product and retain this guide for reference.

This product is intended for household use

only. It is not intended for commercial use.

This product is covered by a limited one-year

warranty. Coverage is subject to limits and

exclusions. See warranty for details.

SPECIFICATIONS

• Dimensions: 4.625 L x 3.188 W x 0.938 H

(11.75 x 8.15 x 2.5 cm)

• Weight: 7.2 oz (204 g)

• Colors Available: Black/White, White/Yel-

low, Blue, Green, Red

• Battery Capacity: 700mAh

• Battery Type: Lithium-polymer

• Prints Per Charge: ~40

• Supported Photo Paper: KODAK ZINK 2 x

EN | 5

3 sticky-back photo paper

BOX CONTENTS

KODAK SMILE Instant Digital Printer

Starter Pack of KODAK ZINK Paper

User Guide

SAFETY PRECAUTIONS

• Do not attempt to disassemble this device

for any reason.

• Never leave your printer or the ZINK® paper

in an area that might become extremely

hot or where it will be exposed to direct

sunlight for a long time. This can cause

your printer to overheat or suer other

problems.

• Don’t get it wet! If you need to clean your

printer, use a soft cloth that’s been slightly

dampened with water or rubbing alcohol,

and gently wipe away any dirty spots. Don’t

submerge the whole thing in water, ever.

• Be careful with your printer. Try not to drop

it, or shake it violently. The inside of the

printer has a lot of very small parts that

could break if they are jostled around too

much.

• Do not use products such as alcohol,

gasoline, diluent, or any other organic

solvent when cleaning or attempting to

clean this product.

• Do not use this device in an environment

6 | EN

where it will be exposed to heavy dust or

humidity/moisture.

• Do not use this printer while bathing or in

a shower.

• Do not place or charge the printer where it

can fall or be pulled into a tub or sink.

• Do not place, drop, or submerge the

printer in water or any other liquid.

• If the printer somehow falls into water

despite you taking all of the above

precautions, please do not reach into

the water to retrieve it, especially if it

is charging. If it is charging, unplug it

immediately and then retrieve it.

• Take care that objects do not fall and

liquids are not spilled onto the printer.

• This printer absolutely will not work

without downloading the ANDROID

or iOS application. If you do not have

an ANDROID phone or an IPHONE,

unfortunately, this printer will not work for

you.

EN | 7

PRODUCT OVERVIEW

Micro USB

charging port

Paper slot

Charging

indicator LED

Reset button

8 | EN

Power indicator LEDs

IDLE SOLID WHITE

ERROR SOLID RED

DATA TRANSFER BLINKING BLUE

NO PAPER BLINKING RED

PRINTING BLINKING WHITE

EN | 9

GETTING READY FOR USE

Charge the SMILE

Before using the printer, connect it to the

charger by plugging the micro USB cable

into the designated micro USB charging port

on the side and allow it to fully charge.

If the red indicator LED light is lashing, this

means that the battery is low and you should

plug the printer in for it to recharge. While

the printer is charging, the indicator LED will

be a solid red light. Once the process has

completed, the indicator LED will change to

a solid green light.

Load the Paper

Load your ZINK paper into the printer: Follow

the steps below to quickly and easily get

your new printer loaded with ZINK sticky-

back paper so you can start printing photos!

1. Open the paper tray in the back by

removing the tray cover at the rear of the

device.

10 | EN

2. Load the blue calibration sheet in with

the barcode facing down. Place the other

plain sheets on top with the glossy side

facing you. Try to avoid touching the

glossy side so you don’t get ingerprints

on it.

3. When you print your irst photo after

loading the ZINK paper, the blue

calibration sheet will be slowly ejected

from the printing slot. Your photo will print

after the calibration sheet inishes.

Download the App

Download the KODAK

SMILE App from the

APPLE APP STORE or

GOOGLE PLAY. You will

need the app installed

on your phone for the

printer to work.

Other manuals for Smile

Table of contents

Languages:

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide