Kingston Technology KTM8000/386 User manual

KTM-8000/386

Memory Expansion Board for IBM

PS/2 Model 70 and Model 80

Computers

Kingston Technology Corporation KTM-8000/386 installation Guide - REV D

Limited Warranty

KINGSTON TECHNOLOGY CORPORATION

(hereinafter called KTC) warrants that this

product is free from defective material and

workmanship and, subject to the conditions

set forth below, agrees to repair or replace

any part of this product which proves defec-

tive by reason of improper workmanship or

materials for a period of five years from the

date of original retail purchase, without

charge for parts and labor.

If this product does not perform as war-

ranted herein, owners sole remedy shall be

repair or replacement as provided below. In

no event will KTC be liable for damages,

lost revenue, lost wages, lost savings or

any other incidental or consequential

damages arising from purchase, use or in-

ability to use this product, even if KTC has

been advised of the possibility of such

damages.

Any defective product should be returned

to your local dealer or distributor, along

with a copy of your sales slip. product

serial number and a detailed description of

the problem you are experiencing.

No express or implied warranty is made for

any KTC product damaged by accidents,

abuse, misuse, natural or personal disaster

or unauthorized modification.

IBM and PS/2 are registered trademarks of international Business Machines, Inc.

KTM-8000/386 Installation Guide - REV D Kingston Technology Corporation

Table of Contents

General Description ................................ .1

Precautions ..................................... .l

Installation Procedure ............................... .2

Create a Configuration Diskette .......................... .3

Installing SIMM Modules .............................. .4

Installing the Memory Expansion Board ..................... .5

Configuring the System .............................. .6

Installing Kingston EMS Driver .......................... .7

Reconfigure Kingston EMS Driver ......................... .9

Appendix ...................................... 10

Kingston Technology Corporation KTM-6000/366 Installation Guide - REV D ~

List of Figures

Figure 1: KTM-8000/386 Memory Expansion Board .................... 1

Figure 2: Installing the SIMM Module ........................... .4

Figure 3: Installing the SIMM Module ........................... .4

Figure 4: 32-bit Memory Expansion Slots ......................... .5

Figure 5: Installing the KTM-8000/386 ........................... .5

KTM-8000/386 Installation Guide - REV D Kingston Technology Corporation

KTM-8000/386

Memory Expansion Board

General Description

The Kingston Technology Corporation

(KTC) memory board can expand

the memory of the IBM PS/2

Model 70 or 80 personal com-

puter. Up to four 2MB SIMM

modules can be installed directly

on the KTM-8000/386 32-bit sys-

tem memory board.

Install two KTM-8000/386 memory

expansion boards for a maximum

16MB system memory capacity.

Figure 1 shows the KTM-8000/386

memory expansion board.

Figure 1: KTM-8000/388 Memory Expansion

Board

Precautions

The KTC memory boards are packaged in you are discharged of static electricity by

special static “bubble” envelopes that touching a grounded metal object.

protect them from shock and static

electricity that could cause damage to the Do not use any magnetic tools for memory

memory chips. Handle the memory boards installation. Do not place the boards near

carefully and keep them in the protective en- any magnetic devices.

velope until you are ready to install them.

Before handling the KTC board, be sure

Kingston Technology Corporation KTM-8000/386 Installation Guide - RN D

2 Installation Procedure

Installation Procedure

CONFIGURE THE SYSTEM

BY USING THE

CONFIGURATION DISKETTE

ADDED MEMORY

TO BE WANDED MEMORY

INSTALL THE

KINGSTON EMS DRIVER

KTM-8000/386 Installation Guide - REV D Kingston Technology Corporation

2 Installation Procedure

Installation Procedure

CONFIGURE THE SYSTEM

BY USING THE

CONFIGURATION DISKElTE

ADDED MEMORY ADDED MEMORY

TO BE EXTENDED MEMORY TO BE EXPANDED MEMORY

1STOP HERE

INSTALL THE

KINGSTON EMS DRIVER

KTM-8000/386 Installation Guide - REV D Kingston Technology Corporation

4 Installing SIMM Modules

Installing SIMM Modules

Use Kingston’s 2MB SIMM modules (KTM-

20OO/M70) or equivalent to plug into the

KTM-8000/386 memory expansion board.

Use the following figures and procedure to

install SIMM memory modules onto the

KTM-8000/386 expansion memory board.

1. SIMM modules must be installed con-

secutively in Pl, P2, P3, and then P4.

Install the first SIMM module in

memory bank 0 (Pl) shown in Figure

The second SIMM module is installed

in memory bank 1 (P2). Up to four

SIMM modules can be installed,

where the last SIMM module occupies

bank 3 (P4).

2. Install each module by plugging it into

the appropriate SIMM socket. Notice

that the SIMM module plugs into the

socket at an angle (Figure 2).

Figure 2: Installing the SIMM Modules

3. Carefully push the SIMM module into

the SIMM socket until it is firmly

seated.

4. Push the SIMM module towards the

memory expansion board. Push

downwards on the SIMM module until

the flange shown in Figure 3 snaps

over the module.

Figure 3: Installing the SIMM Module

KTM-8000/386 Installation Guide - REV D Kingston Technology Corporation

Installing the Memory Expansion Board 5

Installing the Memory Expansion Board

Once YOU~lua the desired number of

SIMM -modules into the KTM-8000/386

memory board and you have created the

Configuration Diskette, you can install the

KTM-8000/386 board into the IBM PS/2

computer. Use the following procedure to

install the KTM-8000/386.

4. Plug the KTM-8000/386 into one of the

32-bii expansion slots. Push the board

down until it seats firmly into the slot.

1. Turn off the PS/2 computer and discon-

nect the AC cord. Unlock the security

lock and disconnect the keyboard and

any peripheral devices.

2. Refer to your IBM user’s manual for

detailed instructions on removing the

cover.

3. The KTM-8000/386 must be installed in

a 32-bit expansion slot on the PS/2

motherboard. The 32-bft expansion

slots are longer than other expansion

slots. Figure 4 shows the location of

the expansion slots.

igure 5: Installing the KTM-8000/388

5. Reinstall the PSJ2 cover and reconnect

the peripheral components.

The Model 70 has

two expansion slot

locations. Figure 4

shows version E61.

Your locations may

vary, depending on

your version. Figure

4 also shows the

three expansion slot

locations for the

Model 80 (version Ill). I PSZtdO”Fl70wER&gf61) Pf:,hlnnFl R”

Figure 4: 32-bit Memory Expansion Slots

Kingston Technology Corporation KTM-8000/386 Installation Guide - REV D

Table of contents

Other Kingston Technology Storage manuals

Kingston Technology

Kingston Technology 100 G2 User manual

Kingston Technology

Kingston Technology Locker+ User manual

Kingston Technology

Kingston Technology IRONKEY D500SM User manual

Kingston Technology

Kingston Technology DataTraveler 410 (DT410) User manual

Kingston Technology

Kingston Technology CompactFlash Unltimate User manual

Kingston Technology

Kingston Technology SSDNow M-series User manual

Kingston Technology

Kingston Technology DataTraveler 2000 User manual

Kingston Technology

Kingston Technology DataTraveler Locker+ G2 User manual

Kingston Technology

Kingston Technology DataTraveler 2000 User manual

Kingston Technology

Kingston Technology DT111 User manual

Kingston Technology

Kingston Technology UHS-I User manual

Kingston Technology

Kingston Technology SSDNow 07-16-2009 User manual

Kingston Technology

Kingston Technology IRONKEY S1000B User manual

Kingston Technology

Kingston Technology IRONKEY Vault Privacy 50 User manual

Kingston Technology

Kingston Technology DataTraveler 6000 User manual

Kingston Technology

Kingston Technology IronKey Vault Privacy 80 User manual

Kingston Technology

Kingston Technology DataTraveler 4000 User manual

Kingston Technology

Kingston Technology DataTraveler 4000 User manual

Kingston Technology

Kingston Technology Wi-Drive User manual

Kingston Technology

Kingston Technology HyperX MAX 3.0 256GB User manual

Kingston Technology

Kingston Technology DataTraveler Bolt Duo User manual

Kingston Technology

Kingston Technology DataTraveler Bolt Duo User manual

Kingston Technology

Kingston Technology DataTraveler DT400 User manual

Kingston Technology

Kingston Technology DataTraveler 4000 User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide