Kingston Technology DataTraveler Reader User manual

Hardware Installation Guide

DataTraveler Reader

Find the language and latest version of the Hardware Installation Guide for your Kingston®

DataTraveler® Reader here.

All the guides are in Adobe Acrobat. PDF format. To view these guides, you need to have the

Adobe Acrobat Viewer installed on your system.

Click on the icon for your free download.

Once installed, just click on the selected installation guide and it will display on your screen.

DataTraveler Reader Hardware Installation Guide

Simplied Chinese . . . . .

Traditional Chinese . . . .

Hindi..................

Arabic.................

. . . . . . . . . . . . For instructions in English

. . . . . . . . . . . . . . . . . . Para instrucciones en español

. . . . . . . . . Für Anleitungen in Deutsch

. . . . . . . . . . . . . . . . . . Pour des instructions en français

. . . . . . . . . . . . . . . . . . Per le istruzioni in italiano

. . . . . . . . . . . .Por as instruções em português

. . . . . . . . . . . . . . . . . . Voor instructies in het Nederlands

. . . . . . . . . . . . . . . . . . Instrukcje w jezyku polskim

. . . . . . . . . . . . . . . . . . Для инструкции на русском

. . . . . . . . . . . . . . . . . . Turkce talimatlar icin

. . . . . . . . . . . . . . . . . . Korean

. . . . . . . . . . . . . . . . . . Japanese

. . . . . . . . . . . . . . . . . . Thai

Version 1.0

ENGLISH

DT READER HARDWARE INSTALLATION INSTRUCTIONS

The DT Reader is a USB Flash drive with an onboard SD/MMC expansion slot. When inserted into a USB

port, two drive letters (i.e. G:\ and H:\) will appear. One for DT Reader’s internal memory and one for the

expansion slot. Learn more at: www.kingston.com/support/install/dt.

Inserting and removing SD/MMC media:

1. Open memory card cover (# 1).

2. Insert media into memory card slot (# 3); contacts facing down. To

remove media, use the eject tab (#2).

3. Close card cover for protection.

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4. Tighten the strap by pulling on the USB cap.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

SPANISH

INSTRUCCIONES DE INSTALACIÓN DEL HARDWARE DEL LECTOR DT

El lector DT es una unidad USB Flash con una ranura de expansión SD/MMC incorporada. Cuando se

conecta a un puerto USB aparecen dos nuevas letras de unidades (p.ej. G:\ y H:\) Una es para la memoria

interna del lector DT y otra para la ranura de expansión. Encontrará más información en:

www.kingston.com/support/install/dt.

Introducción y extracción de un soporte SD/MMC:

1. Abra la cubierta de la tarjeta de memoria (# 1).

2. Introduzca el soporte en la ranura de la tarjeta de memoria (# 3) con

los contactos orientados hacia abajo. Para extraer el soporte, utilice la

pestaña de expulsión (# 2).

3. Cierre la cubierta de la tarjeta para su protección.

Colocación de la correa (opcional):

1. Introduzca la correa (# 4) a través del oricio situado en el lateral de la

tapa del USB.

2. Introduzca la correa a través del oricio situado en el lateral del lector DT.

3. Haga un lazo con la correa e introduzca la tapa del USB por su interior.

4. Apriete la correa tirando de la tapa del USB.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

GERMAN

DATATRAVELER LESEGERÄT: INSTALLATIONSANLEITUNGEN FÜR HARDWARE

Das DataTraveler Lesegerät ist ein USB-Speicher mit integriertem Steckplatz für Secure Digital und

MultiMedia Karten. Wenn dieses in einen USB-Steckplatz eingesteckt wird, erscheinen zwei zusätzliche

Laufwerkbuchstaben (G:\ und H:\), einer für den internen Speicher des Lesegerätes und einer für den

zusätzlichen Kartensteckplatz. Mehr dazu erfahren Sie unter der Adresse:

www.kingston.com/support/install/dt.

Einlegen und Entfernen von SD/MMC-Karten:

1. Öenen Sie die Klappe des Kartenfachs (# 1).

2. Schieben Sie eine Speicherkarte mit nach unten gerichteten

Kontakten in den Kartenslot (# 3) ein. Um die Karte auszuwerfen,

verwenden Sie die Auswerfen-Taste (# 2).

3. Schließen Sie die Klappe des Kartenfachs, um die Karte zu schützen.

Einführen des Trageriemens (Optional):

1. Führen Sie den Riemen (# 4) durch das Loch an der Seite der Kappe

des USB-Speichers.

2. Führen Sie den Riemen durch das Loch an der Seite des DataTraveler

Lesegerätes.

3. Machen Sie mit dem Riemen eine Schleife und führen dann die

Kappe des USB-Speichers in die Önung ein.

4. Ziehen Sie den Riemen durch Ziehen an der Kappe des

USB-Speichers fest.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

FRENCH

INSTRUCTIONS D’INSTALLATION DU MATÉRIEL DT READER

Le lecteur DT Reader est un lecteur Flash USB doté d’un connecteur d’extension SD/MMC intégré.

Lorsqu’il est inséré dans un port USB, deux lettres de lecteurs (G:\ et H:\) s’achent. L’une correspond à la

mémoire interne du DT Reader, l’autre au connecteur d’extension. Pour en savoir plus, visitez :

www.kingston.com/support/install/dt.

Insertion et retrait de la carte SD/MMC :

1. Soulevez le cache de la carte mémoire (#1).

2. Insérez la carte dans le logement de carte mémoire (#3), contacts tournés

vers le bas. Pour retirer la carte, utilisez le système d’éjection (#2).

3. Refermez le cache de protection de la carte.

Insertion de la dragonne (optionnelle):

1. Faites passer la dragonne (#4) dans l’orice situé sur le côté du capuchon USB.

2. Faites passer la dragonne dans l’orice situé sur le côté du lecteur DT Reader.

3. Formez une boucle avec la dragonne et insérez le capuchon USB dans

l’ouverture.

4. Resserrez la dragonne en tirant sur le capuchon USB.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

ITALIAN

ISTRUZIONI PER L’INSTALLAZIONE DELL’HARDWARE DT READER

DT Reader è un’unità Flash USB dotata di slot di espansione per schede di memoria SD/MMC. Inserendo

il dispositivo in una porta USB, compariranno due lettere dell’unità (per es. G:\ e H:\). Una per la memoria

interna di DT Reader, una per lo slot di espansione. Per ulteriori informazioni:

www.kingston.com/support/install/dt.

Inserire e rimuovere supporti SD/MMC:

1. Aprire il coperchio di protezione per schede di memoria (# 1).

2. Inserire il supporto nello slot per schede di memoria (# 3); i contatti

dovranno essere rivolti verso il basso. Per rimuovere il supporto, agire sulla

linguetta di estrazione (#2).

3. Chiudere il coperchio di protezione delle schede.

Inserire la fascetta (opzionale):

1. Far passare la fascetta (# 4) attraverso il foro a lato del cappuccio USB.

2. Far passare la fascetta attraverso il foro a lato del DT Reader.

3. Creare un’asola con la fascetta, facendovi passare all’interno il cappuccio USB.

4. Per ssare tirare la fascetta con il cappuccio USB.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

PORTUGUESE

INSTRUÇÕES DE INSTALAÇÃO DO HARDWARE DO LEITOR DT

O leitor DT é uma unidade ash USB com um slot de expansão SD/MMC. Quando inserida numa porta

USB, aparecerão duas letras de unidade (por exemplo, G:\ e H:\). Um para a memória interna do leitor DT

e um para o slot de expansão. Saiba mais em:

www.kingston.com/support/install/dt.

Inserção e remoção da mídia SD/MMC:

1. Abra a tampa do cartão de memória (# 1).

2. Insira a mídia no slot de expansão do cartão de memória (# 3) com os contatos

voltados para baixo. Para remover a mídia, use a opção para ejetar (#2).

3. Feche a tampa do cartão para proteção.

Inserção da alça (opcional):

1. Passe a alça (# 4) através do furo lateral da tampa USB.

2. Passe a alça através do furo lateral do leitor DT.

3. Faça uma laço com a alça e insira a tampa USB na abertura.

4. Aperte a alça puxando a tampa USB.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

DUTCH

INSTALLATIEINSTRUCTIES VOOR DE HARWARE VAN DE DATATRAVELER READER

De DT Reader is een USB Flash drive met een geïntegreerde SD/MMC-uitbreidingssleuf. Als een

geheugenkaart op de USB-poort wordt aangesloten, verschijnen er twee driveletters (bijvoorbeeld G:\

en H:\). Een voor het interne geheugen van de DT Reader en een voor de uitbreidingssleuf. Ga voor meer

informatie naar: www.kingston.com/support/install/dt.

SD/MMC-geheugenkaarten plaatsen en verwijderen:

1. Open het deksel van het geheugenkaartcompartiment (# 1).

2. Plaats de kaart in de geheugenkaartsleuf (# 3); de contacten wijzen hierbij

naar beneden. Gebruik de ontgrendelknop (#2) om de kaart te verwijderen.

3. Sluit het deksel van het geheugenkaartcompartiment ter bescherming.

Het riempje aanbrengen (optioneel):

1. Geleid het riempje (# 4) door het gat aan de zijkant van het USB-kapje.

2. Geleid het riempje door het gat aan de zijkant van de DT Reader.

3. Maak een lus en schuif het USB-kapje in de opening.

4. Trek het riempje strak aan door aan het USB-kapje te trekken.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

POLISH

INSTALACJA DT READER  INSTRUKCJA

DT Reader to napęd pamięci ash USB z wbudowanym gniazdem rozszerzeń SD/MMC. Po włożeniu

napędu do portu USB pojawią się dwa nowe dyski (np. G:\ i H:\). Jeden z nich to pamięć wewnętrzna DT

Reader, drugi to gniazdo rozszerzeń. Więcej informacji pod adresem:

www.kingston.com/support/install/dt.

Wkładanie i wyjmowanie nośników SD/MMC:

1. Otwórz pokrywę gniazda kart pamięci (#1).

2. Włóż nośnik do gniazda kart pamięci (#3), stykami skierowanymi w dół. Aby

wyjąć nośnik, użyj przycisku wysuwania (#2).

3. Zamknij pokrywę, aby zabezpieczyć gniazdo.

Montaż paska (opcjonalnie):

1. Przesuń pasek (#4) przez otwór znajdujący się z boku zatyczki USB.

2. Przesuń pasek przez otwór znajdujący się z boku DT Reader.

3. Wykonaj pętlę z paska i przełóż przez nią zatyczkę USB.

4. Zaciągnij pętlę, pociągając za zatyczkę USB.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

RUSSIAN

ИНСТРУКЦИЯ ПО УСТАНОВКЕ АППАРАТНОГО ОБЕСПЕЧЕНИЯ ДЛЯ DT READER

DT Reader представляет собой USB флеш драйв со встроенным разъемом для карт SD/MMC. Когда

устройство вставлено в USB порт копмьютера, оно опознается как диск G:\ и H:\ . Одна буква

обозначает внутренную память, другая – слот под карту. Более подробную информацию можно

получить www.kingston.com/support/install/dt.

Установка и удаление карты SD/MMC

1. Откройте крышку устройства (# 1).

2. Вставьте карту лицом вниз в специальный слот (# 3). Для извлечения

карты нажмите на клавишу (# 2).

3. Закройте устройство для безопасности.

Фиксирующий ремешок (не обязательно для установки)

1. Просуньте ремешок (# 4) через специальное отверстие на колпачке USB

2. Просуньте ремешок через специальное отверстие на корпусе USB

3. Сделайте петельку на ремешке и просуньте в нее колпачок от USB

4. Затяните ремешок, потянув за колпачок USB.

Inserting the media into the DT Reader:

1. Open the memory card cover (# 1).

2. Insert the MMC/SD media into the memory card slot (# 3); contacts facing down.

3. Close the memory card cover for protection.

Removing the media from the DT Reader:

1. Open the memory card cover.

2. Use the eject tab (# 2) to remove the media from the memory card slot.

The DT Reader is a standard USB flash drive with onboard SD/MMC expansion.When

inserted into the computer’s USB port, the DT Reader will be assigned two drive letters

(i.e. G:\ and H:\).One drive letter will be assigned to the DT Reader’s internal memory,

and another drive letter will be assigned to the onboard SD/MMC expansion slot.

# 4

Inserting the strap (Optional):

1. Feed the strap (# 4) through the hole on the side of the USB cap.

2. Feed the strap through the hole on the side of the DT Reader.

3. Create a loop with the strap and insert the USB cap into the opening.

4.Tighten the strap by pulling on the USB cap.

DT Reader Hardware Installation Instructions

v1.5

Other Kingston Technology Storage manuals

Kingston Technology

Kingston Technology DataTraveler SE9 User manual

Kingston Technology

Kingston Technology UHS-I User manual

Kingston Technology

Kingston Technology Ironkey D300 User manual

Kingston Technology

Kingston Technology Locker+ User manual

Kingston Technology

Kingston Technology DataTraveler 4000 User manual

Kingston Technology

Kingston Technology DataTraveler II Plus Migo Edition User manual

Kingston Technology

Kingston Technology DataTraveler Bolt Duo User manual

Kingston Technology

Kingston Technology DataTraveler 4000 User manual

Kingston Technology

Kingston Technology DataTraveler 410 (DT410) User manual

Kingston Technology

Kingston Technology IronKey Vault Privacy 80 User manual

Kingston Technology

Kingston Technology DataTraveler 2000 User manual

Kingston Technology

Kingston Technology IRONKEY S1000B User manual

Kingston Technology

Kingston Technology DT4000M-R User manual

Kingston Technology

Kingston Technology DataTraveler Bolt Duo User manual

Kingston Technology

Kingston Technology MobileLite Wireless G2 User manual

Kingston Technology

Kingston Technology Wi-Drive User manual

Kingston Technology

Kingston Technology DataTraveler User manual

Kingston Technology

Kingston Technology SSDNow M-series User manual

Kingston Technology

Kingston Technology DataTraveler 6000 User manual

Kingston Technology

Kingston Technology HyperX User manual

Kingston Technology

Kingston Technology IronKey Locker Plus 50 User manual

Kingston Technology

Kingston Technology SDXC User manual

Kingston Technology

Kingston Technology Wi-Drive User manual

Kingston Technology

Kingston Technology DataTraveler 4000 User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide