Kelvinator Reverse Cycle User manual

201020 66129904148

CONTENTS

1. SAFETY PRECAUTIONS.................................................................

2. UNIT PARTS IDENTIFICATION.......................................................

3. OPERATING INSTRUCTIONS ........................................................

4. INSTALLATION INSTRUCTIONS.....................................................

5. TROUBLESHOOTING .....................................................................

Inside you will find many helpful hints on how to use and maintain your air

conditioner properly. Just a little preventive care on your part can save you

a great deal of time and money over the life of your air conditioner. You'll find

many answers to common problems in the chart of troubleshooting tips.

If you review the chart of Troubleshooting Tips first, you may not need to

call for service at all.

Contact the authorised service technician for repair or maintenance of this unit.

Contact the installer for installation of this unit.

The air conditioner is not intended for use by young children or infirmed persons

without supervision.

Young children should be supervised to ensure that they do not play with the

air conditioner.

If the power cord is to be replaced, replacement work shall be performed by

authorised personnel only.

Installation work must be performed in accordance with the national wiring

standards by authorised personnel only. Wrong connection can cause overheating

!CAUTION

Read This Manual

This air conditioner should be installed in accordance with AS/NZS 3000:2000

and your electricity suppliers rules.

There are local council rules regarding maximum allowable noise levels emitted

by air conditioners.

or fire.

To prevent injury to the user or other people and property damage, the following

instructions must be followed.

Incorrect operation due to ignoring of instructions may cause harm or damage.

The seriousness is classified by the following indications.

SAFETY PRECAUTIONS

This symbol indicates the possibility of death or serious injury.

Meanings of symbols used in this manual are as shown below.

WARNING

Always do this.

Never do this.

CAUTION

This symbol indicates the possibility of injury or damage to property.

Plug in power plug

properly.

Do not modify power cord

length or share the outlet

with other appliances.

Always ensure effective

earthing.

Unplug the unit if strange

sounds, smell, or smoke

comes from it.

Keep firearms away.

Ventilate room before operating air

conditioner if there is a gas leakage from

another appliance.

Otherwise, it may cause electric

shock or fire due to excess heat

generation.

It may cause electric shock or

fire due to heat generation.

Incorrect earthing may cause

electric shock.

It may cause fire and electric

shock.

It may cause fire.

It may cause explosion, fire and burns.

It may cause electric shock or fire

due to heat generation.

It may cause electric shock.

It may cause failure of unit

or electric shock.

It may cause fire and electric

shock.

It may cause fire and electric

shock.

It may cause electric shock or fire.

If the power cord is damaged, it

must be replaced by the manufac-

turer or an authorised service

centre or a similarly qualified per-

son in order to avoid a hazard.

This could harm your health.

Incorrect installation may cause

fire and electric shock.

It may cause electric shock.

It may cause an explosion or fire.

It may cause failure and electric shock.

Do not operate or stop the

unit by inserting or pulling

out the power plug.

Do not operate with wet

hands or in damp

environment.

Do not allow water to run

into electric parts.

Do not use the socket if it is

loose or damaged.

Do not use the power cord

close to heating appliances.

Do not damage or use an

unspecified power cord.

Do not direct airflow at

room occupants only.

Always install circuit

breaker and a dedicated

power circuit.

Do not open the unit

during operation.

Do not use the power cord near

flammable gas or combustibles, such

as gasoline, benzene, thinner, etc.

Do not disassemble or modify unit.

WARNING

CAUTION

When the air filter is to be

removed, do not touch the

metal parts of the unit.

It may cause an injury.

Do not clean unit when

power is on as it may cause

fire and electric shock, it may

cause an injury.

Operation with windows

opened may cause wetting

of indoor and soaking of

household furniture.

When the unit is to be

cleaned, switch off, and turn

off the circuit breaker.

Stop operation and close

the window in storm or

hurricane.

Use caution when unpacking and

installing.

Do not clean the air

conditioner with water.

Water may enter the unit and

degrade the insulation. It may

cause an electric shock.

This could injure the pet or

plant.

It may cause electric shock

and damage.

Do not put a pet or house

plant where it will be

exposed to direct air flow.

Hold the plug by the head

of the power plug when

taking it out.

Ventilate the room well when

used together with a stove,

etc.

An oxygen shortage may occur.

Do not use this air conditioner to

preserve precision devices, food,

pets, plants, and art objects.

It may cause deterioration of

quality, etc.

It may cause failure of product

or fire.

Do not use for special

purposes.

Turn off the main power

switch when not using the

unit for a long time.

If water enters the unit, turn the unit off at the power

outlet and switch off the circuit breaker. Isolate

supply by taking the power-plug out and contact a

qualified service technician.

It may cause failure of

appliance or accident.

Appearance may be

deteriorated due to change

of product color or

scratching of its surface.

Do not place obstacles

around air-inlets or inside

of air-outlet.

Do not use strong deter-

gent such as wax or

thinner but use a soft cloth.

If bracket is damaged, there

is concern of damage due to

falling of unit.

There is danger of fire or

electric shock.

Ensure that the installation bracket of

the outdoor appliance is not damaged

due to prolonged exposure.

Do not place heavy object on the

power cord and ensure that the cord

is not compressed.

Operation without filters may

cause failure.

It contains contaminants and

could make you sick.

Always insert the filters

securely. Clean filter once

every two weeks.

Do not drink water drained

from air conditioner.

Sharp edges could cause injury. It may cause electric shock and damage.

Safety

Precautions Prior to Operation

Preparing for operation

Usage

Cleaning and maintenance

Service

Operating Temperature

1. Contact an installation specialist for installation.

2. Plug in the power plug properly.

3. Do not use a damaged or non-standard power cord.

4. Do not share the same outlet with other appliances.

5. Do not use an extension cord.

6. Do not start/stop operation by plugging/unplugging the power cord.

1. Exposure to direct airflow for an extended period of time could be hazardous

to your health. Do not expose occupants, pets, or plants to direct airflow for

extended periods of time.

2. Due to the possibility of oxygen deficiency, ventilate the room when used

together with stoves or other heating devices.

3. Do not use this air conditioner for non-specified special purposes (e.g.

Preserving precision devices, food, pets, plants, and art objects). Usage in

such a manner could harm such property.

1. Do not touch the metal parts of the unit when removing the filter. Injuries can

occur when handling sharp metal edges.

2. Do not use water to clean inside the air conditioner. Exposure to water can

destroy the insulation, leading to possible electric shock.

3. When cleaning the unit, first make sure that the power and circuit breaker are

turned off.

For repair and maintenance, contact your authorised service dealer.

COOLING MODE

INDOOR OUTDOOR

HEATING MODE

MAX. MIN. MAX. MIN.

32 C 17 C OO

27 C 10 C

43 C 17 C OO

24 C 1 C

MAX. MIN. MAX. MIN.

Note: Performance may be reduced outside of these operating temperatures.

CLOCK SWING

TIMERON TIMER OFF

ENERGY

SAVER SLEEP

LIGHT

FAN ON OFF MODE

OPERATING INSTRUCTIONS

Controls

Vent Control

Revers

e Cycle Models

Cooling Only Models

The vent control is located above the control knobs. (see the following figures).

For maximum cooling efficiency, CLOSE the vent. This will allow internal air

circulation. OPEN the vent to discharge stale air.

The electronic control keypad will look like one of the following:

To open the vent, set the lever to the right position

To close it, set the lever in the left position.

OPEN

VENT

( 9,000BTU/h Models)

SWIN

FILTER

FAN

MOD

POWER

LOW

AUTO

COOL

DRY

FAN

TIMER

SWIN

FILTER

FAN

MOD

POWER

LOW

AUTO

COOL

DRY

FAN

TIMER

beside

There is no green indicator light for “Auto” mode. When you select “Auto”

mode, a beep will sound indicating this “MODE” option was selected.

1/2

AUTOˈ

A beep will sound indicating that this command is opera-

tional.

within

0~10 hours and 1 hour increments within 10~24 hours.

within 0~10 hours and 1 hour decrements

within 10~24 hours.

TIMER:

Press the "TIMER" keypad to activate the auto start/auto stop timer function.

Auto start/stop programs can be set from 1/2~24 hours. Each depression of the

"TIMER" keypad will increase the selected time in 1/2 hour increments within

0~10 hours and 1 hour increments within 10~24 hours.

This mode is used to decrease the humidity in the room.

The temperature setting are adjustable between 16 C to 30 C . Cooling begins

automatically when the room temperature is 1 C above the set point, and stops

when the room temperature is 1 C below the set point. The fan will not stop running.

The temperature settings are adjustable between 16 C to 30 C in heating mode.

the fan speed is optional.

When heating stops, there may be a slight delay of 30 seconds for the fan

For the cooling only models, after selecting “AUTO” by “MODE” keypad,the unit

will select the appropriate operating mode from FAN, COOL or DRY based upon the

temperature difference between the actual and desired room temperature.

For the cooling and heating models,after selecting “AUTO” by “MODE” keypad,the

unit will select the appropriate operating mode for Cool,Heat or Dry based upon the

temperature difference between the actual and desired room temperature.The default

is 20oC,the default cooling temperature set point is 25oC.

motor to stop.

Note: This Function can only be activated by remote control, Please refer to remote

operating instruction for more detail information

heating temperature set point

FILTER:

This feature is a reminder to clean the Air Filter (See Air Filter) for more efficient

operation.The light will illuminate after 250 hours of operation.To reset after cleaning

the filter, press the “FILTER” button and the light will go off.

DEFROST:

Under heating mode, when there is “H1” on the LED display indicates the unit is under

defrost function. In this case, any set on main unit or remote controller will not be

carried out until the defrost is completed.

FAILURE INDICATOR DISPLAY:

Indicates a malfunction of the indoor room temperature sensor

Indicates a malfunction of the evaporator temperature sensor

Indicates a malfunction of the outdoor condenser temperature sensor

When one of the above malfunctions occurs, turn off the unit, and check for

any obstructions. Restart the unit, if the malfunction is still present, turn off

the unit and unplug the power cord. Contact the manufacturer or its service

agents or a similar qualified person for service.

'

' 

'

' 

'

' 

LIGHT:

Turn the unit LED light on or off only.

ENERGY SAVER:

Activate the “ENERGY SAVER” mode.

CLOCK:

Press this button to set clock.

CLOCK SWING

TIMER ON TIMER OFF

ENERGY

SAVER SLEEP

LIGHT

FAN ON OFF MODE

This manual suits for next models

Table of contents

Other Kelvinator Air Conditioner manuals

Kelvinator

Kelvinator KSV26CRC User manual

Kelvinator

Kelvinator KWH20HRB User manual

Kelvinator

Kelvinator KSV26HRB User manual

Kelvinator

Kelvinator KSV25CRG User manual

Kelvinator

Kelvinator KWH22CRF Guide

Kelvinator

Kelvinator KSV35CRH User manual

Kelvinator

Kelvinator KSV25HWJ User manual

Kelvinator

Kelvinator KSE88CRC User manual

Kelvinator

Kelvinator KWH20CRC User manual

Kelvinator

Kelvinator 18000Btu/h User manual

Kelvinator

Kelvinator KSE62HRA User manual

Kelvinator

Kelvinator KSV35HRH User manual

Kelvinator

Kelvinator KSV53HRB User manual

Kelvinator

Kelvinator KWH15CMC User manual

Kelvinator

Kelvinator KSV25CRG User manual

Kelvinator

Kelvinator KSE26CRB User manual

Kelvinator

Kelvinator KSV26CRE User manual

Kelvinator

Kelvinator KSV80HRC User manual

Kelvinator

Kelvinator KSV25CRF User manual

Kelvinator

Kelvinator KWH15CME User manual

Kelvinator

Kelvinator KSV35NRC User manual

Kelvinator

Kelvinator KSV25CRH User manual

Kelvinator

Kelvinator KSV25HRH User manual

Kelvinator

Kelvinator KWH20CMB User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual