Kd frames 7514-TB-E User manual

Manufactured by

End Table

18” TOP RAILS

T-2 2

T-13 4

18” LEGS

PARTS LIST

Knockdown Frameworks, Inc. warrants all of its products for five years against any defects that are due to faulty materials or workmanship. We will promptly correct such

defects by repair or replacement, at our option, without charge. This warranty covers product defects only and will expire five years after date of purchase by the original

consumer purchaser, with proof of purchase required.

This warranty does not apply to damage caused by and resulting from misuse, neglect, accident, or improper operation, maintenance, storage, transportation, or handling

of the product. This warranty is for the original consumer purchaser for residential use only and does not apply if the product is used in any commercial application (such as

rental property). This warranty does not cover any incidental or consequential damages. If you feel that you have a claim under this warranty, please contact the store from

which it was purchased. If this is not possible, call 800-543-3393 for advice on handling your claim.

T-5 4

14” LEG CONNECTORS

T-6 5

15” TOP SLATS

T-7 2

15” CONNECTOR SLATS

T-5

T-9

Push (2) T-5 Leg Connectors

into the holes on (2) T-9

Legs.

Repeat for the other side.

Secure the Leg Connectors

to the Legs using

(4) Wood Screws (H-20).

H-20

2 - 1/2” BOLTS

H-21 4

H-3 4

CROSS DOWELS

H-4 2” WOOD SCREWS

H-10 “Z” WRENCH

H-20 1 - 1/2” WOOD SCREWS

T-15 2

18” SHELF RAILS

T-12 4

13” SHELF SLATS

T-2 TOP RAILS (2)

T-13 LEGS (4)

T-5 LEG CONNECTORS (4)

T-6 TOP SLATS (5)

T-7 CONNECTOR SLATS (2)

T-15 SHELF RAILS (2)

T-12 SHELF SLATS (4)

394 Dairy Pak Rd. • Athens, GA 30607

kdframes.com • [email protected]

Instructions for

sku# 7514-TB-E

Please retighten

screws after

30 days.

Attach the Legs to the

Table Top and Shelf using

(8) Wood Screws H-4.

H-4

Assemble the Shelf by

pushing (4) Shelf Slats

T-12 into the holes on the

(2) Shelf Rails T-15.

Flip Table Top over

so that the holes in

the face of the

Connector Slats are

facing down.

To begin assembling the Table Top, find the Top Rails T-2,

the Connector Slats T-7, and the Top Slats T-6.

The Top Rails have holes along one face, note that they are

closer to one edge. Turn one Top Rail so that the holes are

closer to the bottom edge.

The Connector Slats have two holes in one face, turn them

so that these holes are facing up. Rotate each Connector

Slat so that the board with no holes or dowels is on the

outside, as shown in the diagram to the right.

First attach both Connector Slats to one of the Top Rails and

secure each using 2-1/2” Bolts H-21 and Cross Dowels H-3.

Then insert all five Top Slats.

To attach the other Top Rail, begin by

aligning the hole and dowel at the very

end while keeping the other end of the

Top Rail angled slightly away. Hold the

Top Rail so that this first dowel remains

just inside the first hole, and then align

each subsequent pair of dowls in order.

H-3

H-21

NOTE: THESE DIAGRAMS DO NOT SHOW THE

SAME NUMBER OF SLATS THAT ARE A PART OF

YOUR PRODUCT.

Other kd frames Indoor Furnishing manuals

kd frames

kd frames Savannah 602/3919 User manual

kd frames

kd frames KD Lounger Twin User manual

kd frames

kd frames Nomad 7963-NO-T User manual

kd frames

kd frames Charleston 2 Twin User manual

kd frames

kd frames Nomad 2 XL-Twin User manual

kd frames

kd frames Ekko Bed Full User manual

kd frames

kd frames Nomad Bed User manual

kd frames

kd frames 7515-TB-C User manual

kd frames

kd frames CHARLESTON 3992-CP-F User manual

kd frames

kd frames 7936-RD-36 User manual

kd frames

kd frames 7516-TB-T User manual

kd frames

kd frames Studio Bifold Queen 4721-BI-Q User manual

kd frames

kd frames 2875-NP-EK User manual

kd frames

kd frames Studio Bifold Queen 7721 User manual

kd frames

kd frames KD Lounger Full User manual

kd frames

kd frames Nomad 7964-NO-XT User manual

kd frames

kd frames Savannah 7212-SB-F User manual

kd frames

kd frames CHARLESTON PLUS 3992-CP-F User manual

kd frames

kd frames 7903-TR-T User manual

kd frames

kd frames CHARLESTON 3991-CP-Q User manual

kd frames

kd frames 7902-TR-F User manual

kd frames

kd frames Studio Bifold Full 4722-BI-F User manual

kd frames

kd frames NOMAD PLUS 2875-NP-EK User manual

kd frames

kd frames Charleston Plus Queen User manual

Popular Indoor Furnishing manuals by other brands

Homelegance

Homelegance California 1662PEK-1CK Assembly instruction

Osmond Ergonomics

Osmond Ergonomics FLO instructions

OVE

OVE ELOISE 42 installation manual

overstock

overstock MF286255 Assembly instructions

Sonoma

Sonoma 160-801 Assembly instructions

BOLERO

BOLERO Wicker Side Chair CF158 Care Instructions

Coaster

Coaster 4799N Assembly instructions

Stor-It-All

Stor-It-All WS39MP Assembly/installation instructions

Lexicon

Lexicon 194840161868 Assembly instruction

Next AMELIA NEW 462947 Assembly instructions

Furinno

Furinno 18089 Assembly instruction

Munchkin

Munchkin Push to Close MK0001 manual

impekk

impekk Manual II Assembly And Instructions

Elements

Elements Ember Nightstand CEB700NSE Assembly instructions

JWA

JWA CARY 68429 Assembly instruction

VIPACK

VIPACK AMORI AMKB9014 Assembly instructions

Anthro

Anthro GT03 Series Assembly instructions

Rowico

Rowico SANNA Assembly instructions

kd frames 7514-TB-E User manual

Popular Indoor Furnishing manuals by other brands