KY-F55BU
System
Dimensions
Specifications
Image pickup device 1/3-inch interline CCD x 3 (R, G, B)
Color separation optical system 1/3-inch F1.4 RGB 3-color separation prism
Number of pixels (effective) 768 (H) x 494 (V)
Color system Wideband R-Y, B-Y encoder
Synchronizing system Internal/external
Genlocking input Composite video signal, VBS, BB, 1 V(p-p),
75-ohm (or black burst signal) BNC
Color bar generator Built-in, SMPTE type (NTSC)
Lens mount C-mount
Sensitivity F5.6, 2000 lx
Sensitivity selection (Through remote control); 0 dB/6 dB/9 dB/
12 dB/18 dB/ALC + EEI (Through camera);
0 dB/ALC/EEI/ALC + EEI
S/N ratio 60 dB (typical)
Registration 0.05% (excluding lens characteristics)
Horizontal resolution 750 TV lines (Y channel) 580 TV lines (R, G, B)
Contour correction Adjustable through remote
control unit RM-LP55U
Horizontal dual-edged
Vertical single-edged
Video signal output
Composite video signal VBS 1 V(p-p), 75 ohm
R/G/B signals 0.7 V(p-p), 75 ohm
Composite sync signal 2 V(p-p), 75 ohm
Y/C 358 output Y signal 1 V(p-p), 75 ohm
C signal 0.286 V(p-p), (burst level) 75 ohm
Electronic shutter speed 1/100, 1/250, 1/500, 1/1000, 1/2000 sec.
Variable scan 1/60.3 to 1/2077.6
Trigger connector 5-pin, 5V(p-p)
Lens pin connector 8-pin, applicable to the HZ-615MDU,
HZ-610MDU and HZ-G6350U
Remote input Compatible with the RM-LP55U convertible to
RS-232C with optional VC-P893U/894U
Power source 12 V DC (10.5 to 15 V), 7.5 W
(Camera head only)
Operating temperature range 23°F to 104°F (-5°C to +40°C)
Weight 1.1 lbs. (490g) (without lens)