Johnson Controls Tyco Kantech KT-400 User manual

D29007912R010

Building Technologies & Solutions

www.kantech.com

2022-01-30

D29007912R010

KT-400 Ethernet Four-Door Controller

Installation Guide

D29007912R010

DN2003-2201

2 KT-400 Ethernet Four-Door Controller Installation Guide

Contents

ContentsTYCO INTERNATIONAL LTD END-USER LICENCE AGREEMENT................................................................... 7

Pre-install information.....................................................................................................................................9

Copyright information........................................................................................................................ 10

Safety instructions............................................................................................................................... 10

Technical support...........................................................................................................................................11

United States and Canada.................................................................................................................. 11

Latin America and Caribbean.............................................................................................................11

Europe, Middle East, and Africa......................................................................................................... 12

Asia Pacific............................................................................................................................................ 12

Overview..........................................................................................................................................................13

Compatibility with EntraPass..............................................................................................................13

Compatibility using Windows CE.......................................................................................................... 13

Compatibility using Linux...................................................................................................................... 13

IP devices.............................................................................................................................................. 13

Four on-board doors........................................................................................................................... 14

Communication ports......................................................................................................................... 14

IP connectivity...................................................................................................................................... 14

Inputs.................................................................................................................................................... 14

Lock outputs.........................................................................................................................................15

Relay outputs....................................................................................................................................... 15

Reader outputs.................................................................................................................................... 15

Reader interfaces.................................................................................................................................15

Elevator interface.................................................................................................................................15

Alarm panel interface..........................................................................................................................15

Automatic port detection....................................................................................................................15

Downloadable firmware..................................................................................................................... 16

Trouble and reporting.........................................................................................................................16

Built-in SPI expansion......................................................................................................................... 16

System architecture....................................................................................................................................... 21

LED status indicators..................................................................................................................................... 26

Heartbeat LED patterns...................................................................................................................... 27

Technical specifications................................................................................................................................. 28

Electrical specifications..................................................................................................................................30

KT-400 controller models, expansion modules, and related items..........................................................30

KT-400 models information...........................................................................................................................32

Installing the KT-400 controller.................................................................................................................... 33

Preparing to install the KT-400 controller.........................................................................................33

Physical installation............................................................................................................................. 33

Earth grounding...................................................................................................................................33

Door locking devices........................................................................................................................... 33

KT-400 Ethernet Four-Door Controller Installation Guide 3

Connecting inputs............................................................................................................................... 34

Connecting devices to inputs 1 to 16.......................................................................................................35

Connecting an ioSmart or ABA reader and a keypad............................................................................ 35

Connecting an OSDP HID reader............................................................................................................. 36

Relay controlled outputs.....................................................................................................................37

Auxillary outputs..................................................................................................................................38

Tamper protection...............................................................................................................................38

Connecting the KT-400 controller.................................................................................................................38

Connecting the VC-485 or the USB-485 to the RS-485 Bus............................................................. 38

Connecting the master controller to the host PC using RS-232.....................................................39

Connecting over corporate network (LAN)...................................................................................... 41

Powering the KT-400 controller....................................................................................................................41

SPI expansion port......................................................................................................................................... 42

Calculating the SPI chain current draw.............................................................................................43

Rules for installing expansion modules...................................................................................................... 44

Troubleshooting............................................................................................................................................. 54

Default initialization............................................................................................................................ 56

Resetting the KT-400 controller to factory default DHCP mode.................................................... 56

KT-400 maintenance recommendations...........................................................................................58

Configuring the KT-400 using a browser.....................................................................................................58

Activating the KT-400...........................................................................................................................58

Activating standalone mode.............................................................................................................. 59

Other ways to activate standalone mode.........................................................................................59

Activating EntraPass mode.................................................................................................................60

Configuring the KT-400 using the KT-Finder...............................................................................................60

Network configuration information sheet.................................................................................................. 63

Installation checklist...................................................................................................................................... 66

Preparing to install the KT-400 controller.........................................................................................66

Connecting the VC-485 or the USB-485 to the RS-485 Bus............................................................. 66

Connecting expansion modules to the KT-400 SPI expansion port.............................................. 66

Powering the KT-400 controller......................................................................................................... 67

Inputs and outputs assignments sheet.......................................................................................................68

Compliance specifications.............................................................................................................................71

UL...........................................................................................................................................................71

UL 294 compliance notice...................................................................................................................71

UL 294 performance levels................................................................................................................. 71

UL 1076 compliance notice.................................................................................................................72

FCC & ICC.............................................................................................................................................. 73

CE and UKCA.........................................................................................................................................74

EN50133 compliance notes and requirements................................................................................ 74

Appendix......................................................................................................................................................... 76

KT-400 Ethernet Four-Door Controller Installation Guide4

Security hardening guide................................................................................................................... 76

Architecture................................................................................................................................................ 76

Updating to the latest firmware...............................................................................................................77

Security configuration............................................................................................................................... 77

Connecting to the internet........................................................................................................................77

Managing users..........................................................................................................................................77

Protecting the network..............................................................................................................................78

Deployment................................................................................................................................................ 78

5KT-400 Ethernet Four-Door Controller Installation Guide

6 KT-400 Ethernet Four-Door Controller Installation Guide

TYCO INTERNATIONAL LTD END-USER LICENCE

AGREEMENT

For KANTECH Software provided with or without products or components

IMPORTANT - READ CAREFULLY

KANTECH Software purchased with or without Products and Components is copyrighted and

is purchased under the following license terms:

• This End-User License Agreement (“EULA”) is a legal agreement between You (the company,

individual or entity who acquired the Software and any related Hardware) and KANTECH, the

manufacturer of the integrated security systems and the developer of the software and any

related products or components (“HARDWARE”) which You acquired.

• If the KANTECH software product (“SOFTWARE PRODUCT” or “SOFTWARE”) is intended to

be accompanied by HARDWARE, and is NOT accompanied by new HARDWARE, You may not

use, copy or install the SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes computer

software, and may include associated media, printed materials, and “online” or electronic

documentation.

• Any software provided along with the SOFTWARE PRODUCT that is associated with a separate

end-user license agreement is licensed to You under the terms of that license agreement.

• By installing, copying, downloading, storing, accessing or otherwise using the SOFTWARE

PRODUCT, You agree unconditionally to be bound by the terms of this EULA, even if this EULA

is deemed to be a modification of any previous arrangement or contract. If You do not agree

to the terms of this EULA, KANTECH is unwilling to license the SOFTWARE PRODUCT to You,

and You have no right to use it.

SOFTWARE PRODUCT LICENSE

a - The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as

well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

1 - GRANT OF LICENSE - This EULA grants You the following rights:

a - Software Installation and Use - For each license You acquire, You may have only one copy of the

SOFTWARE PRODUCT installed.

b - Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run,

shared or used concurrently on or from different computers, including a workstation, terminal or

other digital electronic device (“Device”). In other words, if You have several workstations, You will

have to acquire a license for each workstation where the SOFTWARE will be used.

c - Backup Copy - You may make back-up copies of the SOFTWARE PRODUCT, but You may only

have one copy per license installed at any given time. You may use the back-up copy solely for

archival purposes. Except as expressly provided in this EULA, You may not otherwise make copies of

the SOFTWARE PRODUCT, including the printed materials accompanying the SOFTWARE.

2 - DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

a - Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse

engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that

such activity is expressly permitted by applicable law notwithstanding this limitation. You may not

make any changes or modifications to the Software, without the written permission of an officer of

KANTECH. You may not remove any proprietary notices, marks or labels from the Software Product.

You shall institute reasonable measures to ensure compliance with the terms and conditions of this

EULA.

7KT-400 Ethernet Four-Door Controller Installation Guide

b - Separation of Components - The SOFTWARE PRODUCT is licensed as a single product. Its

component parts may not be separated for use on more than one HARDWARE unit.

c - Single INTEGRATED PRODUCT - If You acquired this SOFTWARE with HARDWARE, then the

SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In this case,

the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in this EULA.

d - Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available

to others or post it on a server or web site.

e - Software Product Transfer - You may transfer all of Your rights under this EULA only as part

of a permanent sale or transfer of the HARDWARE, provided You retain no copies, You transfer

all of the SOFTWARE PRODUCT (including all component parts, the media and printed materials,

any upgrades and this EULA), and provided the recipient agrees to the terms of this EULA. If

the SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior versions of the

SOFTWARE PRODUCT.

f - Termination - Without prejudice to any other rights, KANTECH may terminate this EULA if You fail

to comply with the terms and conditions of this EULA. In such event, You must destroy all copies of

the SOFTWARE PRODUCT and all of its component parts.

g - Trademarks - This EULA does not grant You any rights in connection with any trademarks or

service marks of KANTECH or its suppliers.

3 - COPYRIGHT

All title and intellectual property rights in and to the SOFTWARE PRODUCT (including but not

limited to any images, photographs, and text incorporated into the SOFTWARE PRODUCT), the

accompanying printed materials, and any copies of the SOFTWARE PRODUCT, are owned by

KANTECH or its suppliers. You may not copy the printed materials accompanying the SOFTWARE

PRODUCT. All title and intellectual property rights in and to the content, which may be accessed

through use of the SOFTWARE PRODUCT, are the property of the respective content owner and

may be protected by applicable copyright or other intellectual property laws and treaties. This

EULA grants You no rights to use such content. All rights not expressly granted under this EULA are

reserved by KANTECH and its suppliers.

4 - EXPORT RESTRICTIONS

You agree that You will not export or re-export the SOFTWARE PRODUCT to any country, person, or

entity subject to US export restrictions.

5 - CHOICE OF LAW

This Software License Agreement is governed by the laws of the State of New York.

6 - LIMITED WARRANTY

a - NO WARRANTY

KANTECH PROVIDES THE SOFTWARE “AS IS” WITHOUT WARRANTY. KANTECH DOES NOT WARRANT

THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF THE SOFTWARE

WILL BE UNINTERRUPTED OR ERROR-FREE.

b - CHANGES IN OPERATING ENVIRONMENT

KANTECH shall not be responsible for problems caused by changes in the operating characteristics

of the HARDWARE, or for problems in the interaction of the SOFTWARE PRODUCT with non-

KANTECH SOFTWARE or HARDWARE PRODUCTS.

c - LIMITATION OF LIABILITY; WARRANTY REFLECTS ALLOCATION OF RISK

IN ANY EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT IN THIS LICENSE

AGREEMENT, KANTECH'S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS LICENSE AGREEMENT

SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU TO LICENSE THE

SOFTWARE PRODUCT AND FIVE US DOLLARS (USD$5.00). BECAUSE SOME JURISDICTIONS DO

KT-400 Ethernet Four-Door Controller Installation Guide8

NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

d - DISCLAIMER OF WARRANTIES

THIS WARRANTY CONTAINS THE ENTIRE WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL

OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS

OR LIABILITIES ON THE PART OF KANTECH. KANTECH MAKES NO OTHER WARRANTIES. KANTECH

NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON PURPORTING TO ACT ON ITS BEHALF

TO MODIFY OR TO CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR

LIABILITY CONCERNING THIS SOFTWARE PRODUCT.

e - EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY

UNDER NO CIRCUMSTANCES SHALL KANTECH BE LIABLE FOR ANY SPECIAL, INCIDENTAL,

CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF

CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES

INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE PRODUCT

OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR REPLACEMENT

EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS OF THIRD

PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY.

WARNING: KANTECH recommends that the entire system be completely tested on a

regular basis. However, despite frequent testing, and due to, but not limited to, criminal

tampering or electrical disruption, it is possible for this SOFTWARE PRODUCT to fail to

perform as expected.

f - Separation of Components - The SOFTWARE PRODUCT is licensed as a single product. Its

component parts may not be separated for use on more than one HARDWARE unit.

g - Single INTEGRATED PRODUCT - If You acquired this SOFTWARE with HARDWARE, then the

SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In this case,

the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in this EULA.

h - Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available

to others or post it on a server or web site.

i - Software Product Transfer - You may transfer all of Your rights under this EULA only as part

of a permanent sale or transfer of the HARDWARE, provided You retain no copies, You transfer

all of the SOFTWARE PRODUCT (including all component parts, the media and printed materials,

any upgrades and this EULA), and provided the recipient agrees to the terms of this EULA. If

the SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior versions of the

SOFTWARE PRODUCT.

j - Termination - Without prejudice to any other rights, KANTECH may terminate this EULA if You fail

to comply with the terms and conditions of this EULA. In such event, You must destroy all copies of

the SOFTWARE PRODUCT and all of its component parts.

k - Trademarks - This EULA does not grant You any rights in connection with any trademarks or

service marks of KANTECH or its suppliers.

Pre-install information

If you are familiar with the installation process, use the Installation checklist at the end of the

manual to ensure that you complete all the necessary installation steps.

9KT-400 Ethernet Four-Door Controller Installation Guide

trademarks of Johnson Controls.

Safety instructions

Important: Never install the equipment during a lightning storm!

This equipment, KT-400 Ethernet Four-Door Controller Model KT-400-EU, shall be used installed and

used within an environment that provides the pollution degree max 2 and over voltages category

II NON HAZARDOUS LOCATIONS, INDOOR only. The equipment is FIXED and PERMANENTLY

CONNECTED and is designed to be installed by Service Persons only;

[service person is defined as a person having the appropriate technical training and experience

necessary to be aware of hazards to which that person may be exposed in performing a task and

of measures to minimize the risks to that person or other persons.] The equipment is installed in a

metallic cabinet that meets the applicable requirements for a FIRE ENCLOSURE.

Note: When installed on the North American Market, powered via the UL, cUL Listed 75VA

Transformer, the KT-400 Ethernet Four-Door Controller shall be connected to the mains by a

LICENSED ELECTRICIAN in accordance with the applicable rules of the National Electrical Code

or Canadian Electrical Code regarding this type of connection.

1. The connection to the mains supply must be made as per the local authorities rules and

regulations: In the UK as per BS6701. An appropriate disconnect device must be provided as

part of the building installation. Where it is not possible to rely on the identification of the

NEUTRAL in the AC MAINS SUPPLY, the disconnecting device must disconnect both poles

simultaneously (LINE and NEUTRAL).

2. AVOID setting up the equipment near heaters, air conditioners, ventilators, and/or

refrigerators; DO NOT select a place that exposes your controller to direct sunlight, excessive

heat, moisture, vapors, chemicals or dust.

3. If during the installation a knockout on the cabinet is removed, it is the installer's

responsibility to ensure that the same degree of protection for the cabinet is provided by the

use of bushings, fittings, adequate sealant, etc.

4. The metallic cabinet must be secured to the building structure before operation. Use four

(4) stainless steel tapping screws #8, 32 mm (1.25 in) to mount the cabinet.

5. The ground connection must be as shown within the included diagram, or equivalent.

6. Internal wiring must be routed in a manner that prevents:

- Excessive strain on wire and on terminal connections;

- Loosening of terminal; connection

- Damage of conductor insulation;

- Reducing the clearance between SELV (Safety Extra Low Voltage) circuits and NON-POWER

Limited Circuits (Battery wires);

- Route the battery wires away from the rest of the SELV circuits.

7. It is the end-user and/or installer's responsibility to ensure that the disposal of the used

batteries is made according to the waste recovery and recycling regulations applicable to the

intended market.

8. There are no serviceable parts within the equipment; For any issues regarding the

equipment please contact your installer.

KT-400 Ethernet Four-Door Controller Installation Guide10

Other manuals for Tyco Kantech KT-400

Table of contents

Other Johnson Controls Controllers manuals

Johnson Controls

Johnson Controls Facility Explorer FX20 User manual

Johnson Controls

Johnson Controls LN Series User manual

Johnson Controls

Johnson Controls VFD66 Series Manual

Johnson Controls

Johnson Controls Tyco KT-1 User manual

Johnson Controls

Johnson Controls FX-PCA3611 User manual

Johnson Controls

Johnson Controls VMA1617 User manual

Johnson Controls

Johnson Controls PENN P70 Series Manual

Johnson Controls

Johnson Controls MR12DR230-1C User manual

Johnson Controls

Johnson Controls FX-PCV1930 User manual

Johnson Controls

Johnson Controls VMA1200 Series Operating instructions

Johnson Controls

Johnson Controls VA9310 Series User manual

Johnson Controls

Johnson Controls VG1600 Series User manual

Johnson Controls

Johnson Controls IQ Keypad-PG User manual

Johnson Controls

Johnson Controls VA-7700 Series User manual

Johnson Controls

Johnson Controls M9220-GGx-3 series User manual

Johnson Controls

Johnson Controls FEC26 Series User manual

Johnson Controls

Johnson Controls M4-CG Series User manual

Johnson Controls

Johnson Controls VMA 1400 Series User manual

Johnson Controls

Johnson Controls tyco PowerSeries Neo User manual

Johnson Controls

Johnson Controls FEU2610 Series User manual

Johnson Controls

Johnson Controls M9316-A Z Series User manual

Johnson Controls

Johnson Controls TEC3010 User manual

Johnson Controls

Johnson Controls G670 Assembly instructions

Johnson Controls

Johnson Controls Metasys MS-FEU1610-0U User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual