Johnson Controls GCGD12 Quick start guide

SPLIT-SYSTEM

IR CONDITIONERS

13 SEER – R-22

MODELS:

GCGD12 THRU 60

(1 THRU 5 NOMINAL TONS, 1 PHASE)

Due to continuous product improvement, specifications

are subject to change without notice.

isit us on the web at www.york.com

dditional rating information can be found at

ww.ahridirectory.org

LISTED

ISO 9001

Certified Quality

Management System

TECHNICAL

GUIDE

TECHNICAL

GUIDE

400038-UTG-B-0708

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The 13 SEER Series condensing unit is the outdoor part of a

versatile system of air conditioning. It is designed to be cus-

tom-matched with one of UPG’s complete line of evaporator

sections, with each serving a specific function. Matching Air

Handlers are available for upflow, downflow, or horizontal

applications to provide a complete system. Electric Heaters

are available, if required. Add-On coils are available for use

with upflow, downflow, or horizontal furnaces and air han-

dlers.

WARRANTY

Single Phase Units:

5-year limited parts warranty.

5-year limited compressor warranty.

FEATURES

•QUALITY CONDENSER COILS - The coil is constructed

of aluminum microchannel tubing and enhanced aluminum

fins for increased efficiency and corrosion protection.

•PROTECTED COMPRESSOR - The compressor is inter-

nally protected against high pressure and temperature.

This is accomplished by the simultaneous operation of

high pressure relief valve and a temperature sensor which

protects the compressor if undesirable operating condi-

tions occur. A liquid line filter-drier further protects the

compressor.

•DURABLE FINISH - The cabinet is made of pre-painted

steel. The pre-treated galvanized steel provides a better

paint to steel bond, which resists corrosion and rust creep.

Special primer formulas and matted-textured finish insure

less fading when exposed to sunlight.

•LOWER INSTALLED COST - Installation time and costs

are reduced by easy power and control wiring connec-

tions. Available in sweat connect models only. The unit

contains enough refrigerant for matching indoor coils and

15 feet of interconnecting piping. The small base dimen-

sion means less space is required on the ground or roof.

•TOP DISCHARGE - The warm air from the top mounted

fan is blown up away from the structure and any landscap-

ing. This allows compact location on multi-unit applica-

tions.

•LOW OPERATING SOUND LEVEL - The upward air flow

carries the normal operating noise away from the living

area. The rigid top panel effectively isolates any motor

sound. Isolator mounted compressor and the rippled fins

of the condenser coil muffle the normal fan motor and

compressor operating sounds.

•LOW MAINTENANCE - Long life permanently lubricated

motor-bearings need no annual servicing.

•EASY SERVICE ACCESS - Fully exposed refrigerant con-

nections, and a single panel covering the electrical con-

trols make for easy servicing of the unit.

•SECURED SERVICE VALVES - Secured re-usable ser-

vice valves are provided on both the liquid and vapor

sweat connections for ease of evacuating and charging.

•U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment cer-

tification program, which is based on ARI Standard 210/240.

400038-UTG-B-0708

2Johnson Controls Unitary Products

All dimensions are in inches. They are subject to change

without notice. Certified dimensions will be provided upon

request.

Physical and Electrical Data

MODEL GCGD12

S21S2 GCGD18

S21S2 GCGD24

S21S2 GCGD30

S21S2 GCGD36

S21S2 GCGD42

S21S2 GCGD48

S21S2 GCGD60

S21S2

Unit Supply Voltage 208-230V, 1φ, 60Hz

Normal Voltage Range 1187 to 252

Minimum Circuit Ampacity 6.2 9.5 11.3 14.0 18.2 19.9 22.7 33.5

Max. Overcurrent Device Amps 215 15 15 20 30 30 35 50

Min. Overcurrent Device Amps 315 15 15 15 20 20 25 35

Compressor Type Rotary Rotary Rotary Recip Recip Recip Recip Scroll

Compressor Amps Rated Load 4.5 7.2 8.4 10.6 13.4 14.7 17.0 25.6

Locked Rotor 26.0 40.0 47.0 61.0 78.0 78.0 86.0 150.0

Crankcase Heater No No No No No No No No

Fan Motor Amps Rated Load 0.50 0.50 0.80 0.80 1.4 1.5 1.5 1.5

Fan Diameter Inches 18 18 18 18 18 22 22 22

Fan Motor Rated HP 1/12 1/12 1/8 1/8 1/4 1/4 1/4 1/4

Nominal RPM 1100 1100 1075 1075 1100 850 850 850

Nominal CFM 1350 1550 1850 1950 2400 3000 3000 3300

Coil Face Area Sq. Ft. 8.1 9.7 9.7 11.3 12.1 16.5 16.5 19.75

RowsDeep 11111111

Fin / Inches 23 23 23 23 23 23 23 23

Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Vapor Line Set OD (Field Installed) 5/8 5/8 3/4 3/4 3/4 7/8 7/8 1-1/8

Unit Charge (Lbs. - Oz.) 43 - 2 3 - 0 3 - 13 3 - 7 3 - 15 4 - 2 4 - 5 5 - 4

Charge Per Foot, Oz. 0.66 0.66 0.68 0.68 0.68 0.70 0.70 0.76

Operating Weight Lbs. 96 110 130 150 160 175 176 200

1.Rated in accordance with ARI Standard 110, utilization range “A”.

2.Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.

3.Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.

4.The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than

15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

CDIMENSIONS

Unit

Model Dimensions

(Inches) Refrigerant Connection

Service Valve Size

1. Including Fan Guard.

B C Liquid Vapor

12 24 23-1/2 23-1/2

3/8”

3/4”

18 28 23-1/2 23-1/2

24 28 23-1/2 23-1/2

30 32 23-1/2 23-1/2

36 34 23-1/2 23-1/2

42 34 29 29 7/8”

48 34 29 29

60 40 29 29 1-1/8”

400038-UTG-B-0708

Johnson Controls Unitary Products 3

Additional R-22 Charge / Orifice Size for Various Matched Systems

Outdoor Unit GCGD12

S21S2 GCGD18

S21S2 GCGD24

S21S2 GCGD30

S21S2 GCGD36

S21S2 GCGD42

S21S2 GCGD48

S21S2 GCGD60

S21S2

Required Orifice or TXV 1,2 0.041 / 2A 0.052 / 2A 0.059 / 0.061 / 2A 0.065 / 2A 0.073 / 2A 0.081 / 2C 0.084 / 2C 0.096 / 2C

Factory R-22 Charge, lbs-oz 3 - 2 3 - 0 3 - 13 3 - 7 3 - 15 4 - 2 4 - 5 5 - 4

Indoor Coil3,4 Additional Charge, Oz

FC/MC/PC/UC18A2A 00 – –––––

FC/MC/PC/UC18B2A 00 – –––––

FC/MC/PC/UC24A2A –0 – –––––

FC/MC/PC/UC24B2A –0 – –––––

FC/MC/PC32A2A –– +3 +4––––

FC/MC/PC35B2A –– +3 +4––––

FC/MC/PC35C2A –– +3 +4––––

FC/MC/PC/UC36A2A –– 0 –––––

FC/MC/PC/UC36B2A –– 0 –––––

FC/MC/PC/UC36C2A –– 0 –––––

FC/MC/PC37A2A – – +7 +12 +4 – – –

FC/MC/PC43B2C –– – ––0––

FC/MC/PC43C2C –– – ––0––

FC/MC/PC/UC48C2C – – – – – +5 +2 –

FC/MC/PC/UC48D2C – – – – – +5 +2 –

FC/MC62D2C –– – ––––0

HC18A2A 00 – –––––

HC30A2A –– 0 –––––

HC36B2A –– +3 +4––––

HC42C2C – – – +12 +4 0 – –

AHP18B2A 00 – –––––

AHP24B2A –0 – –––––

AHP30B2A –– +3 +4––––

AHP36C2A – – – +12 +4 – – –

AHP42C2C –– – ––0––

AHP/SHP60D2C –– – –––0–

FC/MC/PC/UC18A3X41+052+0 – –––––

FC/MC/PC/UC18B3X41+052+0 – –––––

FC/MC/PC/UC24A3X –52+2 – –––––

FC/MC/PC/UC24B3X –52+2 – –––––

FC/MC/PC32A3X –– 61+365+4––––

FC/MC/PC35B3X –– 61+365+4––––

FC/MC/PC35C3X –– 61+365+4––––

FC/MC/PC/UC36A3X –– 59+0 –––––

FC/MC/PC/UC36B3X –– 59+0 –––––

FC/MC/PC/UC36C3X –– 59+0 –––––

FC/MC/PC37A3X – – 61 + 7 65 + 12 73 + 4 – – –

FC/MC/PC43B3X – – 61 + 7 65 + 12 73 + 4 81 + 0 – –

FC/MC/PC43C3X – – 61 + 7 65 + 12 73 + 4 81 + 0 – –

FC/MC/PC/UC48C3X – – – – 73 + 4 81 + 5 84 + 2 –

FC/MC/PC/UC48D3X – – – – 73 + 4 81 + 5 84 + 2 –

FC/MC62D3X –– – ––––96+0

HC18A3X 41+052+0 – –––––

HC30A3X –– 59+0 –––––

HC36B3X –– 61+365+4––––

HC42C3X – – 61 + 7 65 + 12 73 + 4 81 + 0 – –

For Notes See Page 4.

400038-UTG-B-0708

4Johnson Controls Unitary Products

PROCEDURES:

1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of inter-

connecting line tubing.

2. Verify the TXV or orifice and additional charge required for specific evaporator coil in the system using the above table.

3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical

Data Table.

4. For TXV match charge weight needs to be weighed in for specififc coil match and lineset length.

5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for

evaporator + adder for line set.

AHP18B3X 41+052+0 – –––––

AHP24B3X –52+0 – –––––

AHP30B3X –– 61+365+4––––

AHP36C3X – – – – 73 + 4 – – –

AHP42C3X – – – – 73 + 4 81 + 0 – –

AHP/SHP60D3X – – – – – – 84 + 0 –

F4FP024 –52+0 – –––––

–2A+0 – –––––

F4FP036 –– 61+1 –––––

––2A+2–––––

F4FP040 –– – 65+0––––

–– –2A+0––––

F5FP048 – – – – 73 + 0 81 + 5 84 + 2 –

– – – – 2A + 0 2C + 5 2C + 2 –

F5FP060 –– – –––84+0–

–– – –––2C+0–

FOOTNOTES:

1. For applications requiring a TXV use 1TVM series kit.

2. Approved orifice shipped with outdoor unit.

3. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit

2FD06700224.

4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.

Additional R-22 Charge / Orifice Size for Various Matched Systems (Continued)

Outdoor Unit GCGD12

S21S2 GCGD18

S21S2 GCGD24

S21S2 GCGD30

S21S2 GCGD36

S21S2 GCGD42

S21S2 GCGD48

S21S2 GCGD60

S21S2

Required Orifice or TXV 1,2 0.041 / 2A 0.052 / 2A 0.059 / 0.061 / 2A 0.065 / 2A 0.073 / 2A 0.081 / 2C 0.084 / 2C 0.096 / 2C

Factory R-22 Charge, lbs-oz 3 - 2 3 - 0 3 - 13 3 - 7 3 - 15 4 - 2 4 - 5 5 - 4

Indoor Coil3,4 Additional Charge, Oz

See Cautionbelow

Models 12-48 require start kits for TXV matches. Models with “H” on the end of the model number have factory installed start kits.

For models without an “H” refer to tech guide for kit number reference.

F*FP Air Handlers come with a factory installed R-22 TXV. Please note that some models may take a different TXV then what is factory

installed. The proper TXV must be installed for system reliability and performance. Also note, TXV must be removed for orifice match.

400038-UTG-B-0708

Johnson Controls Unitary Products 5

— = Not applicable.

COOLING CAPACITY - With Air Handler Coils

UNIT

MODEL

AIR HANDLER COIL

MODEL1

COOLING

MODEL W RATED

CFM NET MBH SEER EER

TOTAL SENS.

13 SEER AC WITH MA

GCGD18S21S2 MA08B 17 FC/MC18B 600 18.0 12.6 13.00 11.00

MA08B 17 FC/MC24B 600 18.0 12.6 13.00 11.00

GCGD24S21S2 MA08B 17 FC/MC35B 800 24.0 17.2 13.00 11.00

MA08B 17 FC/MC36B 800 24.0 17.2 13.00 11.00

MA08B 17 FC/MC43B 800 24.0 17.2 13.00 11.00

GCGD30S21S2 MA12B 17 FC/MC35B 1000 29.0 21.2 13.00 11.00

MA12B 17 FC/MC43B 1000 29.0 21.2 13.00 11.00

GCGD36S21S2 MA12B 17 FC/MC43B 1200 35.0 24.4 13.00 11.00

MA14D 24 FC/MC48D 1200 35.0 24.4 13.00 11.00

GCGD42S21S2 MA16C 21 FC/MC43C 1400 42.0 29.4 13.00 11.00

MA14D 24 FC/MC48D 1400 42.0 29.4 13.00 11.00

MA16C 21 FC/MC48C 1400 42.0 29.4 13.00 11.00

GCGD48S21S2 MA16C 21 FC/MC48C 1600 46.0 32.6 13.00 11.00

MA20D 24 FC/MC48D 1600 46.0 32.6 13.00 11.00

GCGD60S21S2 MA20D 24 FC/MC62D 1800 54.0 41.5 13.00 11.00

13 SEER AC WITH AHP / SHP / F*FP

GCGD12S21S2 AHP18 17 – 450 12.0 8.9 13.00 11.00

GCGD18S21S2 AHP18 17 – 650 18.0 12.6 13.00 11.00

AHP24 17 – 650 18.0 12.6 13.00 11.00

F4FP024 18 – 600 18.0 12.6 1300 11.00

GCGD24S21S2 AHP30 17 – 795 24.0 17.3 13.00 11.00

F4FP036 21.5 – 860 24.0 17.3 13.00 11.00

GCGD30S21S2 AHP30 17 – 1015 29.0 21.2 13.00 11.00

AHP36 21 – 1015 29.0 21.2 13.00 11.00

F4FP040 21.5 – 1000 29.0 21.2 13.00 11.00

GCGD36S21S2 AHP36 21 – 1235 35.0 24.4 13.00 11.00

F5FP048 24 – 1235 35.0 24.4 13.00 11.00

GCGD42S21S2 AHP42 21 – 1485 42.0 29.4 13.00 11.00

F5FP048 24 – 1455 42.0 29.4 13.00 11.00

GCGD48S21S2 AHP/SHP60 24 – 1600 46.0 33.0 13.00 11.00

F5FP048 24 – 1690 46.0 33.0 13.00 11.00

F5FP060 24 – 1680 46.0 33.0 13.00 11.00

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.

Cooling MBH based on 80°F entering air temperature, 50% RH, and rated air flow.

EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.

SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power

input in watt-hours during the same period.

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

400038-UTG-B-0708

6Johnson Controls Unitary Products

COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils

UNIT MODEL

FURNACE** COIL

MODEL

COOLING

CFM RANGE

(Min.-max.) WRATED

CFM NET MBH SEER1EER

TOTAL SENS.

GCGD12S21S2 450 - 750 14,17 FC/MC/PC18 450 12.0 9.1 13.00 11.00

450 - 750 14 HC18 450 12.0 9.1 13.00 11.00

450 - 750 14,17 UC18 450 12.0 9.1 13.00 11.00

GCGD18S21S2

450 - 750 14,17 FC/MC/PC18 600 18.0 12.6 13.00 11.00

450 - 750 14,17 FC/MC/PC24 600 18.0 12.6 13.00 11.00

450 - 750 14 HC18 600 18.0 12.6 13.00 11.00

450 - 750 14,17 UC18 600 18.0 12.6 13.00 11.00

450 - 750 14,17 UC24 600 18.0 12.6 13.00 11.00

GCGD24S21S2

600 - 1000 14 FC/MC/PC32 800 24.0 17.2 13.00 11.00

600 - 1000 17,21 FC/MC/PC35 800 24.0 17.2 13.00 11.00

600 - 1000 14,17,21 FC/MC/PC36 800 24.0 17.2 13.00 11.00

600 - 1000 14 FC/MC/PC37 800 24.0 17.2 13.00 11.00

600 - 1000 17,21 FC/MC/PC43 800 24.0 17.2 13.00 11.00

600 - 1000 14 HC30 800 24.0 17.2 13.00 11.00

600 - 1000 17 HC36 800 24.0 17.2 13.00 11.00

600 - 1000 21 HC42 800 24.0 17.2 13.00 11.00

600 - 1000 14,17,21 UC36 800 24.0 17.2 13.00 11.00

GCGD30S21S2

800 - 1200 14 FC/MC/PC32 1000 29.0 21.2 13.00 11.00

800 - 1200 17,21 FC/MC/PC35 1000 29.0 21.2 13.00 11.00

800 - 1200 14 FC/MC/PC37 1000 29.0 21.2 13.00 11.00

800 - 1200 17,21 FC/MC/PC43 1000 29.0 21.2 13.00 11.00

800 - 1200 17 HC36 1000 29.0 21.2 13.00 11.00

800 - 1200 21 HC42 1000 29.0 21.2 13.00 11.00

GCGD36S21S2

1000 - 1400 14 FC/MC/PC37 1200 35.0 24.4 13.00 11.00

1000 - 1400 17,21 FC/MC/PC43 1200 35.0 24.4 13.00 11.00

1000 - 1400 21,24 FC/MC/PC48 1200 35.0 24.4 13.00 11.00

1000 - 1400 21 HC42 1200 35.0 24.4 13.00 11.00

1000 - 1400 21,24 UC48 1200 35.0 24.4 13.00 11.00

GCGD42S21S2

1200 - 1600 17,21 FC/MC/PC43 1400 42.0 29.4 13.00 11.00

1200 - 1600 21,24 FC/MC/PC48 1400 42.0 29.4 13.00 11.00

1200 - 1600 21 HC42 1400 42.0 29.4 13.00 11.00

1200 - 1600 21,24 UC48 1400 42.0 29.4 13.00 11.00

GCGD48S21S2 1400 - 1800 21,24 FC/MC/PC48 1550 46.0 32.6 13.00 11.00

1400 - 1800 21,24 UC48 1550 46.0 32.6 13.00 11.00

GCGD60S21S2 1600 - 2000 24 FC/MC62 2000 55.0 41.0 13.00 11.00

1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.

** Refer to Quick Selection Chart for specific furnace match-up.

400038-UTG-B-0708

Johnson Controls Unitary Products 7

ACCESSORIES

Refer to Price Manual for specific model numbers.

HARD START KIT - Required when using TXV indoor coil.

Also, provides increased starting torque for areas with low

voltage.

OFF CYCLE TIMER DELAY - Provides a 5-minute off cycle

to prevent rapid recycling of the compressor.

ROOM THERMOSTATS - A wide selection of compatible

thermosets are available to provide optimum performance

and features for any installation.

1H/1C, manual changeover electronic non-programmable

thermostat.

1H/1C, auto/manual changeover, electronic programmable,

deluxe 7-day, thermostat.

1H/1C, auto/manual changeover, electronic programmable.

* For the most current accessory information, refer to the

price book or consult factory.

SOUND POWER RATINGS*

* Rated in accordance with ARI 270-95 Standards.

CONDENSER ONLY DATA

MODEL SUCT. T/P @ COMPR. AIR TEMP ON CONDENSER

75° F 95° F 115° F

Temp. PSIG MBH KW MBH KW MBH KW

GCGD12S21S2

SH 11 / SC 13 @

95 OD Temp

40 68.6 11.81 0.73 8.15 0.85 5.29 1.01

45 76.1 12.65 0.73 10.15 0.86 7.21 1.02

50 84.1 13.55 0.74 12.29 0.87 9.26 1.04

GCGD18S21S2

SH 11 / SC 10 @

95 OD Temp

40 68.6 17.53 1.07 15.03 1.29 11.98 1.57

45 76.1 18.63 1.07 17.25 1.30 14.07 1.59

50 84.1 19.80 1.08 19.61 1.31 16.30 1.61

GCGD24S21S2

SH 10 / SC 12 @

95 OD Temp

40 68.6 22.88 1.42 19.07 1.70 13.99 2.02

45 76.1 24.93 1.44 22.25 1.72 17.25 2.07

50 84.1 27.12 1.47 25.63 1.75 20.72 2.12

GCGD30S21S2

SH 12 / SC 10 @

95 OD Temp

40 68.6 28.77 1.75 23.85 2.01 17.06 2.21

45 76.1 30.28 1.80 26.56 2.07 19.76 2.31

50 84.1 31.89 1.86 29.45 2.13 22.64 2.40

GCGD36S21S2

SH 10 / SC 11 @

95 OD Temp

40 68.6 31.46 2.16 18.41 2.37 13.42 2.78

45 76.1 36.54 2.20 25.84 2.47 18.88 2.85

50 84.1 41.95 2.24 33.77 2.58 24.71 2.91

GCGD42S21S2

SH 10 / SC 9 @

95 OD Temp

40 68.6 40.44 2.46 28.86 2.83 21.78 3.21

45 76.1 45.28 2.52 36.10 2.91 27.55 3.30

50 84.1 50.44 2.59 43.82 3.00 33.70 3.41

GCGD48S21S2

SH 10 / SC 12 @

95 OD Temp

40 68.6 42.04 2.70 26.14 3.03 21.19 3.49

45 76.1 46.86 2.77 35.10 3.16 27.59 3.60

50 84.1 52.00 2.85 44.65 3.30 34.43 3.73

GCGD60S21S2

SH 10 / SC 9 @

95 OD Temp

40 68.6 52.76 3.40 46.38 4.04 36.26 5.08

45 76.1 59.98 3.41 53.35 4.14 42.46 5.15

50 84.1 67.69 3.41 60.79 4.25 49.07 5.22

Model Source 1 Kit numbers

12 S1-2SA06708606

18 S1-2SA06708606

24 S1-2SA06708706

30 S1-2SA06705906

36 S1-2SA06708106

42 S1-2SA06708106

48 S1-2SA06708806 UNIT MODEL (dBA)

12 72

18 75

24 76

30 75

36 76

42 75

48 76

60 78

400038-UTG-B-0708

8Johnson Controls Unitary Products

TYPICAL INSTALLATION

TYPICAL FIELD WIRING

THERMOSTAT

SEAL OPENING(S) WITH

PERMAGUM OR EQUIVALENT

TO INDOOR COIL

TO FURNACE OR

AIR HANDLER

TERMINAL BLOCK

NEC CLASS 2 WIRING

NEC CLASS 1 WIRING

ALL OUTDOOR WIRING

MUST BE WEATHERPROOF. CONTROL

ACCESS

PANEL

WEATHERPROOF

DISCONNECT

SWITCH

MINIMUM 18” SERVICE

ACCESS CLEARANCE

ON ONE SIDE

60” OVERHEAD

CLEARANCE

6” CLEARANCE

AROUND PERIMETER

NOTE:

ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES

POWER WIRING

208/230-1-60

CONTACTOR

TERMINALS

COIL

GND.

LUG

CYRGW

YRGW

POWER WIRING

CONTROL WIRING

FACTORY WIRING

24 VOLT CONTROL WIRING

MINIMUM 18 GA. WIRE

(NEC CLASS 2)

FURNACE OR AIR HANDLER TERMINAL BLOCK

ROOM THERMOSTAT

CONDENSING UNIT

ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.

TERMINAL W IS ONLY

REQUIRED ON SYSTEMS

WITH HEAT.

400038-UTG-B-0708

Johnson Controls Unitary Products 9

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the

listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

COOLING PERFORMANCE DATA

AIR CONDITIONER MODEL NO. GCGD12S21S2

INDOOR COIL MODEL NO. FC/MC/PC18

CONDENSING

ENTERING AIR

TEMPERATURE

IDCFM 450 600 750

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

65 T.C. 11.3 11.9 12.1 13.1 14.1 11.7 12.4 12.3 13.2 14.1 12.1 12.9 12.6 13.2 14.1

S.C. 11.1 10.2 9.1 9.0 7.2 11.5 11.0 9.6 9.2 7.4 11.9 11.8 10.0 9.5 7.5

KW 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

75 T.C. 11.1 11.7 11.7 12.9 13.8 11.6 12.2 12.0 13.0 13.8 12.0 12.7 12.3 13.1 13.9

S.C. 10.9 10.4 9.1 9.0 7.2 11.4 11.2 9.6 9.4 7.4 11.8 11.9 10.1 9.8 7.7

KW 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

85 T.C. 10.9 11.6 11.4 12.6 13.5 11.4 12.1 11.7 12.8 13.6 11.9 12.6 11.9 13.0 13.7

S.C. 10.7 10.6 9.0 9.0 7.1 11.2 11.3 9.6 9.6 7.5 11.7 12.1 10.3 10.1 7.8

KW 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

95 T.C. 10.7 11.5 11.1 12.3 13.2 11.2 12.0 11.3 12.6 13.3 11.7 12.4 11.6 12.8 13.4

S.C. 10.5 10.8 9.0 9.0 7.1 11.0 11.5 9.7 9.7 7.5 11.5 12.2 10.4 10.4 7.9

KW 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

105 T.C. 10.0 10.9 10.2 11.5 12.5 10.6 11.4 10.5 11.8 12.7 11.1 11.9 10.9 12.0 12.9

S.C. 9.8 10.3 8.6 8.8 6.9 10.4 10.9 9.2 9.5 7.3 11.0 11.5 9.9 10.2 7.8

KW 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

115 T.C. 9.3 10.3 9.3 10.7 11.9 9.9 10.9 9.7 11.0 12.2 10.5 11.4 10.1 11.3 12.4

S.C. 9.2 9.9 8.2 8.6 6.7 9.8 10.3 8.8 9.3 7.2 10.4 10.8 9.4 10.0 7.6

KW 1.1 1.0 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1

125 T.C. 8.6 9.7 8.4 9.9 11.2 9.3 10.3 8.9 10.2 11.6 9.9 10.9 9.4 10.5 11.9

S.C. 8.5 9.4 7.8 8.4 6.5 9.2 9.8 8.4 9.1 7.0 9.8 10.1 8.9 9.8 7.5

KW 1.1 1.1 1.1 1.2 1.2 1.2 1.1 1.1 1.2 1.2 1.2 1.2 1.1 1.2 1.2

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.

Air Handler Coil T.C. S.C. KW

– HC18 1.00 1.00 1.00

– UC18 1.00 1.00 1.00

AHP18 – 0.98 0.97 0.98

400038-UTG-B-0708

10 Johnson Controls Unitary Products

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the

listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

COOLING PERFORMANCE DATA

AIR CONDITIONER MODEL NO. GCGD18S21S2

INDOOR COIL MODEL NO. FC/MC/PC18

CONDENSING

ENTERING AIR

TEMPERATURE

IDCFM 450 600 750

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72

65 T.C. 15.4 17.1 16.7 18.1 18.0 16.2 17.6 17.2 18.2 18.0 17.0 18.2 17.6 18.3 18.0

S.C. 15.2 13.4 11.4 11.3 8.6 16.0 14.7 12.6 12.0 9.0 16.8 16.0 13.8 12.7 9.5

KW 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

75 T.C. 14.9 16.6 16.3 17.7 18.0 15.9 17.3 16.8 17.9 18.1 16.9 18.0 17.3 18.2 18.2

S.C. 14.7 13.4 11.3 11.1 8.5 15.7 14.9 12.7 12.1 9.2 16.7 16.4 14.1 13.1 9.8

KW 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1

85 T.C. 14.4 16.1 15.8 17.3 18.0 15.6 17.0 16.3 17.7 18.2 16.8 17.8 16.9 18.1 18.4

S.C. 14.3 13.5 11.2 11.0 8.5 15.5 15.2 12.8 12.3 9.3 16.6 16.9 14.4 13.6 10.2

KW 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

95 T.C. 13.9 15.7 15.4 16.8 17.9 15.3 16.6 15.9 17.4 18.2 16.7 17.5 16.5 18.0 18.5

S.C. 13.8 13.5 11.1 10.8 8.5 15.2 15.4 12.9 12.4 9.5 16.5 17.3 14.7 14.0 10.5

KW 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3

105 T.C. 13.2 14.6 14.2 15.9 17.2 14.6 15.7 14.9 16.5 17.5 16.0 16.8 15.5 17.1 17.8

S.C. 13.1 13.1 10.6 10.6 8.3 14.4 14.8 12.4 12.3 9.3 15.8 16.4 14.2 13.9 10.4

KW 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

115 T.C. 12.5 13.6 13.1 15.0 16.5 13.9 14.9 13.8 15.6 16.8 15.2 16.2 14.6 16.2 17.2

S.C. 12.4 12.6 10.1 10.3 8.1 13.7 14.1 11.9 12.1 9.2 15.1 15.7 13.7 13.8 10.2

KW 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

125 T.C. 11.8 12.6 12.0 14.2 15.7 13.2 14.1 12.8 14.8 16.1 14.5 15.5 13.6 15.3 16.5

S.C. 11.7 12.2 9.6 10.1 7.9 13.0 13.5 11.5 11.9 9.0 14.4 14.9 13.3 13.8 10.1

KW 1.7 1.7 1.7 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.

Air Handler Coil T.C. S.C. KW

– FC/MC/PC/UC24 1.00 1.00 1.00

– HC18 1.00 1.00 1.00

– UC18 1.00 1.00 1.00

AHP18 – 1.00 1.00 1.00

AHP24 – 1.00 1.00 1.00

F4FP024 – 1.00 1.00 1.00

MA08B FC/MC18B 1.00 1.00 1.00

MA08B FC/MC24B 1.00 1.00 1.00

This manual suits for next models

Table of contents

Other Johnson Controls Air Conditioner manuals

Johnson Controls

Johnson Controls TempMaster ZD Series User manual

Johnson Controls

Johnson Controls DSH Series User manual

Johnson Controls

Johnson Controls YORK YHUJYH024BARS-A-M User manual

Johnson Controls

Johnson Controls YORK YH9FXH18BAH--FX User manual

Johnson Controls

Johnson Controls JX Series User manual

Johnson Controls

Johnson Controls HIC1006B21S User manual

Johnson Controls

Johnson Controls ZST06 User manual

Johnson Controls

Johnson Controls DEM024 User manual

Johnson Controls

Johnson Controls York VIR 40A User manual

Johnson Controls

Johnson Controls DSV60B-300B User manual

Johnson Controls

Johnson Controls J ZB Series User manual

Johnson Controls

Johnson Controls NexusPremier 25 Ton Quick start guide

Johnson Controls

Johnson Controls HIC2018B21S User manual

Johnson Controls

Johnson Controls TCGF24 User manual

Johnson Controls

Johnson Controls LX Series Quick start guide

Johnson Controls

Johnson Controls J ZH Series User manual

Johnson Controls

Johnson Controls YORK EOKC-09 FS User manual

Johnson Controls

Johnson Controls SA PC090 THRU 240 User manual

Johnson Controls

Johnson Controls L-Series User manual

Johnson Controls

Johnson Controls YCD Series User manual

Johnson Controls

Johnson Controls HICS015B21S Installation and operation manual

Johnson Controls

Johnson Controls 13 Seer-TCGD User manual

Johnson Controls

Johnson Controls J ZH Series User manual

Johnson Controls

Johnson Controls York DMS Saber Series Instruction manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual