JKEXER CHEER 465 User manual
MOTORIZED TREADMILL
CHEER 465
We reserve the right to make change at any time without notice,
in colors, parts and materials.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONS
CAUTION : BEFORE AND AFTER RUNNING ON THE TREADMILL
ASSEMBLY INSTRUCTIONS
P. 3-4
POSITIONING FOR OPERATION
PROFILES FOR PROGRAMS
P. 7
MASTER POWER SWITCH LOCATION
COMPUTER INSTRUCTIONS
ERROR MESSAGE & TROUBLE SHOOTING
P. 10
HOW TO ADJUST INCLINE
P. 10
HOW TO FOLD UP FOR STORAGE
HOW TO FOLD DOWN FOR EXERCISE
HOW TO MOVE
P. 12
COMPUTER ANGLE ADJUSTMENT
P. 12
P. 12
P. 13
ALIGN THE RUNNING BELT
ADJUST THE RUNNING BELT TENSION
CLEANING AND INSPECTING THE RUNNING BELT
P. 13
CLEANING
P. 14
INSPECT FASTENERS AND WIRING
P. 14
STORAGE
P. 14
HOW TO WORK OUT SAFELY AND EFFICIENTLY
P. 14
EXPLODED DRAWING
P. 15
PARTS LIST
P. 15
TREADMILL OPERATION
P. 6-7
P. 9
P. 8
P. 5
P. 3
P. 2
P. 11
P. 11
ASSEMBLY PARTS LIST
RUNNING DECK LUBRICATION
P. 16
P. 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P. 1
1
IMPORTANT SAFETY INSTRUCTIONS
Please read the following basic precautions prior to use of the treadmill:
* Never operate the treadmill with the air openings blocked. Keep air openings
free of lint, hair, and the like.
WARNING
* This treadmill requires a dedicated circuit as 110V/220V 15/10AMP separately that is not
shared by any other electrical appliances . Failure to do so can damage the electronics and
the motor, and will void the warranty .
* To reduce the risk of electric shock, always unplug the power cord from electrical outlet
immediately after using and before cleaning, assembling or servicing .
* Never leave the treadmill unattended when plugged In . Disconnect by turning off the master
power switch and unplugging from outlet .
* Always keep hands and feet off the treadmill while others are using it .
* Never place hands or feet under the treadmill .
* Do not allow children on or around treadmill .
CAUTIONS
* Never operate the treadmill if it has been dropped or damaged, or exposed to water .
Contact with your distributor for service recommendations .
* Before starting any exercise program, it is recommended that you consult your physician .
* Stop using this appliance if you feel dizziness or discomfort .
* Medical approval and close supervision is necessary when appliance is used by or near
handicapped individuals .
* Use the treadmill only for its intended use as described in this manual .
* Do not pull the treadmill by the power cord or use it as a handle .
* Keep power cord away from heated surfaces and oven flame .
* Do not use or store outdoors .
* Do not operate where aerosol products are being used or where oxygen is being
administered .
* While turning on the power, please stand beside the treadmill, not on the treadmill .
* Maximum user weight is 100KGS (220LBS)
* Do not operate in a wet or moist condition .
* Do not use the treadmill on a carpet that is greater than 1/2 inch in height .
* Do not operate under a blanket . Excessive heating can occur and cause fire, electrical
shock, or injury to persons .
* Never insert any object into any opening on the treadmill .
* Keep the treadmill on a solid, level surface with sides at least two feet from any wall . Be
sure the area around the treadmill remains clear during use and has adequate clearance,
see illustration below .
doing exercise, it can not be used for medical purpose.
* This computer with function of pulse detection is designed for users' reference when
2
* Do not walk or jog barefoot or without shoes .
* Do not walk or jog in loose shoes or slippers .
Athletic shoes are always recommended
while using this treadmill .
* Never walk or jog while wearing loose fitting,
long garments such as slacks pajamas or
dresses .
* When walking or jogging always stay on the
forward part of the treadmill .
* Never jog or walk faster than is comfortable
for you .
* Do not jump up on the treadmill from side to
side .
* Do not place any liquids on any parts of the
treadmill .
If it will not fit your outlet, have a properly
grounded outlet installed by a qualified
electrician . This unit must be plugged into a
nominal 110 volt, 10 AMP or 220 Volt ,7 AMP
circuit, which has a grounding plug . Outlets
that service multiple appliances, or have
fluctuating voltage of more than 5%, may
result in erratic performance or cause damage
to the treadmill electronics . Using electrical
power other than that which has been specified
will ultimately void any warranty, implied
or otherwise . Never remove or bypass the
electrical ground contained in the treadmill's
three-lug with an adapter .
The difference in the RPM of motor is ±10%
This product must be grounded . If it should
malfunction or break down, grounding provides
a path of least resistance for the electric
current,reducing the risk of electric shock .
This treadmill is equipped with a cord having
an equipment grounding connector and a
grounding plug . The plug must be plugged into
an appropriate outlet that is properly installed
and grounded in accordance with all local
codes and ordinances
DANGER
Improper connection of the treadmill grounding
can result in the risk of electric shock . Check
with a qualified electrician if you are in
doubt as to whether the product is properly
grounded . Do not modify the plug provided
with the treadmill .
ELECTRICAL GROUNDING INSTRUCTIONS
* Do not plug into the same outlet with any
other electrical appliance while using this
treadmill .
REAR
TOP
VIEW
FRONT
2 FEET MIN.
LEFT
SIDE
2 FEET MIN.
RIGHT
SIDE
2 FEET MIN.
CAUTION:
BEFORE AND AFTER RUNNING ON THE TREADMILL
Before Running:
1. Read the manual first for familiarization of the computer and other important features.
2. Before starting the treadmill, always stand on two side rails on both sides (not on the
running belt) as shown on drawing.
3. Have safety key properly place on the computer console, and have safety clip securely
attach to an article of your clothing.
4. Start the treadmill and allow it to reach at speed of at least 1.0kph, hold your hand on the
handlebar then walk on the running belt to start your exercise program.
After Running:
1. If you hear any abnormal noise from motor, please stop using and contact with your
distributor for necessary maintenance.
2. Please refer to below RUNNING DECK LUBRICATION to do necessary periodical
maintenance for long-term and functional operation.
PLEASE NOTE WITHOUT DOING PERIODICAL MAINTENANCE MIGHT VOID THE
WARRANTY.
RUNNING DECK LUBRICATION
Why to lubricate?
If the lubricant dries out, the friction between the belt and the deck will rise and place undue
stress on the drive motor, drive belt and electronic motor control board, which could result in
catastrophic failure of these expensive components.
When to lubricate?
High-efficient and low-friction running deck is used on this machine. The deck comes pre-
lubricated and subsequent lubrication should be done in every 120 hours, or every 3 months of
operation, whichever comes first. Keeping the deck lubricated at the recommended intervals
ensures the longest life possible for your treadmill.
3
12
3
4
What to lubricate?
Do not lubricate with other than our approved lubricant. Your treadmill comes with one 30ml
tube of silicone. For further lubrication, you may order from distributor for our 200ml silicone:
• 200ml silicone in one bottle with 35cm applicator
• 100% silicone, non-petroleum base, contains of no harmful solvents, non-toxic and
nonflammable
• Pump action spray bottle
• Good for treadmill that used non-petroleum based lubricant
How to lubricate?
Follow below drawing, lift running belt as high as possible, wipe the deck and the edge of the
belt with a clean lint free cloth to remove any dirt on both sides. Then inserting straw from
silicone bottle from either side of the running belt to reach to the deck surface about 18 inches
from motor cover, pump out the silicone of the tube across the deck, parallel to the motor cover,
in about one foot line. The one foot line should be in the middle of the deck at approximately
equal distance from both side edges of the belt. Repeat above procedures to distribute onto 3
spots on the running deck as shown on drawing. Once the silicone is applied, you should walk,
not run, at low speed on the treadmill for at least 5 minutes to ensure it is evenly distributed.
You want the lubricant to be applied about the spot that your feet would hit the belt as you are
walking. This should be about 18 inches from the motor cover. You may walk
on the treadmill to see where your feet land on the belt. Please note if you mostly run on the
treadmill, the spot where your feet land may be different from the spot in walking.
Note:
1. IF belt is stuck under side rail, use a screwdriver to lever out for easy lubrication
2. IF belt is not centered, please refer to P. 13 --- Aligning The Running Belt.
Remarks: If static symptom happens, adding silicone on the running deck will also help
solve it.
A
B
D
C
E
F
ASSEMBLY PARTS LIST
1. MAIN FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BOTTOM FRAME 1
3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HANDLEBAR 1
4. COMPUTER & BRACKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TOP COVER 2
6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .POWER CABLE 1
7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KNOB & WASHER 1+1
8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AIR SHOCK 1
A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BOLT & WASHER
4+4
B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BOLT & NUT 2+2
C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BOLT 4
D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW 4
E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW 4
F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TOOLS 4
5
5
1
2
3
6
7
8
4
ASSEMBLY INSTRUCTIONS
Step 1:
Make the Main Frame (1) lying as photo shown.
Use Bolt (A) to fix Bottom Frame (2) onto the
bottom end of two front posts.
Step 4:
Then use Bolt (C) to fix Handlebar (3) and
front post as photo shown.
Step 2:
Use Bolt, Nut (B) to fix one end of Air Shock (8)
(thicker part) at the bottom of Main Frame (1)
and fix another end (thinner part) at the bottom
frame as photo shown.
Please note there is a concave on the air-shock,
it must face the inner side.
Please do not tighten the bolts as it needs
some space for the movement of Air Shock(8).
Step 3:
Connect pulse wires provided from front
post and Handlebar (3).
6
Step 7:
Use Screw (D) to fix Top Cover (5) at the top of
front post.
Step 8:
Plug in the Power Cable (6) into the socket
located at the front of MAIN FRAME (1).
Step 5:
Use Knob and Washer
(7) to fix Computer
Bracket (4) on the Handlebar (3), then
connect two wires provided from
Handlebar (3) and Computer (4).
Positioning for operation
There are two balancers underneath the
bottom frame. Adjust these two balancers
to make sure the machine is stably
positioned on the ground for exercise.
Step 6:
Use Screw (E) to fix Computer (4) onto the
bracket as shown. Then tighten all above-
mentioned bolts.
7
TREADMILL OPERATION
BASIC INFORMATION
1. When safety key is removed:
There is no figure shown on LCD.
2. When safety key is positioned: It is in MANUAL mode, and all the functions are ready for manual
operation. You may also Press SPEED FAST / SLOW key to choose program mode from P1, P2,
P3, P4, P5, When pressing SPEED FAST key, the sequence is MN -> P1 -> P2 -> P3 -> P4 -> P5 ->
MN When pressing SPEED SLOW key, the sequence is MN -> P5 -> P4 -> P3 -> P2 -> P1 -> MN
HOW TO OPERATE
OPERATION IN QUICK START MODE
STEP 1. POWER UP
Press the Master Power Switch located at the front of the frame (see MASTER POWER SWITCH
LOCATION) to "ON" position, and insert SAFETY KEY, 0 is shown on all functions in the window.
STEP 2. BEGIN WORKOUT
First option:
Press button to begin operating. TIME, DISTANCE, & CALORIES will count up.
Second option:
OPERATION IN TARGET MODE (TIME, DISTANCE OR CALORIES). Press button, 0.00
starts flashing. Press / button to set desired time (10 - 99). Then press START
button to begin operating. You may also press button again and press /
button to also set distance (1 - 20km) or again press button, / button to
set CALORIES (10 - 500KCAL). Countdown operation will follow your preset, you can choose only
one function for counting down operation. You may always press / button to
adjust speed. and machine will be stopped automatically when it counts down to 0.
OPERATION IN PROGRAM P1 ~ P5
STEP 1. POWER UP
Press the Master Power Switch located at the front of the frame (see MASTER POWER SWITCH
LOCATION) to "ON" position, and insert SAFETY KEY " 0 " is shown on all functions in the LCD window.
STEP 2.
Press / button to choose P1 ~ P5. Then you may press button to begin operating
followed by STANDARD PRESET time (30 minutes) for each program. Or follow next step.
STEP 3.
After choosing P1 - P5, please press button, then press / button to choose
LEVEL (1 - 3), then again press , / button again to set TIME (10 - 99)
STEP 4.
Press button to begin operating. You may press / button to adjust speed
8
Table of contents
Other JKEXER Treadmill manuals
JKEXER
JKEXER 8010A User manual
JKEXER
JKEXER VIGOR 735 User manual
JKEXER
JKEXER Turbo 776 User manual
JKEXER
JKEXER AeroWork 897 User manual
JKEXER
JKEXER Turbo 772 User manual
JKEXER
JKEXER FitLux 665 User manual
JKEXER
JKEXER M-POWER 870 User manual
JKEXER
JKEXER VIGOR 736 User manual
JKEXER
JKEXER EPIC 823 User manual
Popular Treadmill manuals by other brands
Smooth Fitness
Smooth Fitness EVO 3i user manual
NordicTrack
NordicTrack NETL81810.0 user manual
Schwinn
Schwinn 830/Journey 8.0 Assembly manual / owner's manual
Keys Fitness
Keys Fitness HealthTrainer HT-740T owner's manual
Spirit
Spirit XT8 Service manual
NordicTrack
NordicTrack T 14.0 Treadmill Manuel de l'utilisateur