10
Note: When heating mode works, if don’t want to empty the water-tank under this
mode, please connect a water-drainage-pipe to remove the water out continuously.
Fan mode
·Press “ MODE” to select fan mode, fan mode indicator turns on .
·Press “SPEED” to select high speed or low speed.
·Temperature and sleeping function cannot be setup.
Timer mode
·Under standby mode, press “TIMER” to setup the power-on time. Timer indicator
turns on.
·Under power-on mode, press “TIMER” to setup power-off timer. Timer indicator
turns on.
Dehumidifying mode
·Press “MODE” to select dehumidifying mode, dehumidifying mode indicator turns
on .
·Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
Sleeping mode
·Press key “SLEEP”enter into sleeping mode, default value of fan speed is low.
·When sleeping mode turns on , under cooling mode, the first one hour later, setting
temperature will go up 1℃, the second one hour later, setting temperature will go
up another 1℃, and then keep the same ; under heating mode, the first one hour
later, setting temperature will go down 1℃, the second one hour later , the setting
temperature will go down another 1℃, and then keep the same .
·Sleeping mode is invalid under dehumidifying and fan mode. Under water full,
machine standby and mode conversion, sleeping mode will be cancelled .
Compressor protection
·Three minutes later after power on / restart, compressor starts to run.
