Jensen JSB-550 User manual

ALEXA ENABLED BLUETOOH/WIFI

WIRELESS STEREO SMART SPEAKER

MODEL: JSB-550

USER MANUAL

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATI

NG THIS UNIT AND

RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure

your personal safety. However, improper use can result in potential electrical shock or fire

hazards. Please read all safety and operating instructions carefully before installation and use,

and keep these instructions handy for future reference. Take special note of all warnings listed

in these instructions and on the unit.

1. Read these instructions – All the safety and operating instructions should be read

before the appliance is operated.

2. Keep these instructions – The safety and operating instructions should be kept for future

reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions

should be adhered to.

4. Follow all instructions – All operation and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near water; for

example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement, or

near a swimming pool.

6. Clean only with dry cloth – The appliance should be cleaned only as recommended by

the manufacturer.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions. The appliance should be situated so that its location or position does not

interfere with its proper ventilation. For example, the appliance should not be situated on

a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a

built-in installation, such as a bookcase or cabinet that may impede the flow of air through

the ventilation openings.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. AC adaptor is used as disconnect device and it should remain readily operable during

intended use. In order to disconnect the apparatus from the mains completely, the AC

adaptor should be disconnected form the mains socket outlet completely.

10. Only use attachments / accessories specified by the manufacturer.

11. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

14. This appliance shall not be exposed to dripping or splashing water and that no object

filled with liquids such as vases shall be placed on the apparatus.

15. Power Sources – The appliance should be connected to a power supply only of the type

described in the operating instructions or as marked on the appliance. Do not overload

wall outlet.

16. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek

advice from your local qualified service technician or contact the distributor via the

telephone number at the back of this instruction manual.

17. Nameplate is located on the bottom of product.

IMPORTANT NOTES

Avoid installing the unit in locations described below:

 Places exposed to direct sunlight or close to heat radiating appliances such as

electric heaters.

 Places subject to constant vibration.

 Dusty, humid or moist places.

 Sources of electrical noise such as fluorescent lamps or motors.

 In case of malfunction due to electrostatic discharge, the apparatus has to be reset by

disconnecting it from mains supply, wait at least for 60 seconds before reconnect

COMPLIANCE WITH FCC REGULATIONS

FCC ID: LMZ-31324GC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

PROTECT YOUR FURNITURE

This product is equipped with non-skid rubber 'feet' to prevent the product from moving when

you operate the controls. These 'feet' are made from non-migrating rubber material specially

formulated to avoid leaving any marks or stains on your furniture. However certain types of oil

based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet'

to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to

your furniture we strongly recommend that you purchase small self-adhesive felt pads,

available at hardware stores and home improvement centers everywhere, and apply these

pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture.

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the start of

your musical enjoyment. Now it's time to consider how you can maximize the fun and

excitement your equipment offers. This manufacturer and the Electronic Industries

Association's Consumer Electronics Group want you to get the most out of your equipment

by playing it at a safe level. One that lets the sound come through loud and clear without

annoying blaring or distortion and, most importantly, without affecting your sensitive

hearing.

Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of

sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard

against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

 Start your volume control at a low setting.

 Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have established a comfortable sound level:

 Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future.

After all, we want you listening for a lifetime.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often undetectable until it is too late, this manufacturer

and the Electronic Industries Association's Consumer Electronics Group recommend you

avoid prolonged exposure to excessive noise.

Customer's Record:

The serial number of this product is found on its back cover. You should note the serial

number of this unit in the space provided as a permanent record of your purchase to aid in

identification in the event of theft of loss.

Model Number: JSB-550 Serial Number: ____________________

ACCESSORIES

1 x AC Adaptor

1 x Stereo Audio Connection Cable with 3.5mm stereo plugs

1 x User Manual

LOCATION OF CONTROLS

MAIN UNIT

TOP VIEW

<<Replace updated drawing here>>

Controls Press & hold Tap

1. Microphone --- ---

2. Mode/ Tap to talk Button Switch input mode

(Bluetooth/ Line in/ WiFi)

Activate Mic to talk to Alexa

without saying Alexa first

3. Power On/Standby;

Mic ON/OFF Button

Turn unit On/ Off Switch Mic/ Alexa On/ Off

4. Volume - Button Decrease Volume

Continuously

Decrease Volume by step

5. Volume + Button Increase Volume

Continuously

Increase Volume by step

6. Play/ Pause/ Pair In BT mode, enter pairing

mode

Play/ Pause at WiFi/ BT

playback

7. Mode indication LED --- ---

BACK VIEW

<<Replace updated drawing here>>

Controls Press & hold Tap

1. DC IN Jack --- ---

2. LINE IN Jack --- ---

3. WPS Button In WiFi mode, press and hold

this button for 5 – 6 seconds

then release it, unit will reset

WiFi to factory setting then

restart for set up.

In WiFi mode, tap this button

once to link up the speaker to

your Wi-Fi network by

following the APP instruction.

GETTING STARTED

CONNECTING THE AC POWER

This unit operates using the included AC adaptor with 12V 2A (center-positive )

output, and is compatible with standard 120V~ 60Hz AC household power

Insert the the DC Plug of the AC Adaptor into the DC IN jack on the back of the unit. Plug the

AC Adaptor into a standard 120V~ 60Hz AC wall outlet.

INITIALIZATION

The unit will initialize when first plugged in. The initialization process could take up to 60

seconds to complete, so please wait for this process to finish before proceeding. The LED

will be flashing White, you will hear a voice prompt of “Ready for a set up” when the

initialization is completed. The unit is now in setup Mode.

NOTE: 1.) The initialization process may take up to 60 seconds or longer when first

connected. This process is normal and only occurs when first plugged in.

2.) If the unit has been setup to connect your Wi-Fi network successfully, the LED will be

solid White after connected. The unit is now in WiFi mode.

WPS

AUX IN

There is a multicolor LED indicator on the top panel. The operation mode is indicated by

different color of the LED. The type of activity is indicated by whether the LED is on or

flashing.

Speaker Mode Mode LED color Flashing Solid ON

Bluetooth Turquoise Disconnected Connected

Blue Alexa thinking Alexa listening

Blue & White Alexa talking ---

WiFi

White Wi-Fi disconnected Wi-Fi Connected

Line in Green --- Line in mode

All modes Red --- Mic Off

All modes (When you say

Alexa or Tap to talk

Yellow --- No network

connection/ Not

signed into Amazon

account

CONNECT JSB-550 TO A NETWORK

1. Download the Muzo Player app to your phone from Play store for Andriod phone and App

store for iOS device.

Android App iOS App

2. Turn On the unit, you will hear the voice indication for the unit in WiFi mode and the Mode

LED will flashing White. Press and hold the MODE button repeatedly to select WiFi mode

if necessary.

3. Run the app and follow on screen guide to setup network.

4. Touch the “WiFi Setup Wizard” button on your

samrtphone screen to add the first speaker to your

network.

5. Select your WiFi network and touch the “next” button. Type the password of your WiFi

network.

6. Press the WPS button on the back of JSB-550 and touch the “next” button on your

smartphone screen.

<<Replace updated drawings here>>

7. The App will search the speaker and automatically add it to your network.

WPS

8. After connected to WiFi, touch the “Next” button to select a speaker’s name from the list or

set a custom one.

9. Touch the “Finish” icon to select the preferred language for Alexa.

10. Select Amazon Alexa from Muzo app main menu to sign in your Amazon account, after

finish, you can enjoy the speaker with Alexa voice control features.

Notes:

1.) To use Alexa voice control, you need to have Amazon account, go to

“www.Amazon.com” to register. This can play with basic Alexa voice control function.

2.) To play music with Alexa, you also need to register the Amazon Prime Music service

or upload the music on Amazon sever library.

8. To add more speakers, touch the “ + “ icon on top right corner of your

smartphone screen and repeat above steps.

Reconnect JSB-550 to a WiFi network

1. Turn on unit and select WiFi mode, tap the WPS button on the back of JSB-550, you will

hear “Connecting to your network” voice prompt.

2. Follow steps 3-8 above.

Reset JSB-550 WiFi to Factory data reset

1. Turn on unit and select WiFi mode, press and hold the WPS button for 5 – 6 seconds and

release the button, you will hear “Factory data reset” voice prompt.

2. Wait for unit restart until you hear voice prompt for ready to set up.

3. Follow steps 3-8 above.

Note: Always setup WiFi connection in JSB-550 power on and WIFi mode. Press WPS button

in other operation modes or Standby mode will not hear voice prompt and may cause

WiFi setup error.

USE AMAZON ALEXA VOICE CONTROL

When asking Alexa questions always say “Alexa” first or tap the “Tap to talk” button on the top

panel, Mode LED turns Blue, this indicate Alexa is listening.

Play music from Amazon Music, Tuneln and many more apps/ services just by using voice

commands.

Answers questions, such as time and date, find out sports scores and schedules, read

Audible audio books, listen to news, traffic and weather reports, find info on local businesses,

consult Wikipedia

Take notes, prepare shopping lists, shop at Amazon.

Note: To enable voice control, you will need an account to play music from Amazon Music

and some other services

Now by simply say “Alexa” or tap the Tap to talk button, when Mode LED turns to solid blue,

Things to try:

Hello

Who are you

What is the whether today

Who is Michael Jackson

What is the time now

Wikipedia: George Washington

Tell me a joke

Play iHeart Radio

Table of contents

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide