JBL Control Series User manual
ASSEMBLY INSTRUCTION GUIDE JBL CINEMA SERIES
ASSEMBLY INSTRUCTION GUIDE
ASSEMBLY INSTRUCTION GUIDE JBL CINEMA SERIES
3132 M/HF Assesmbly Instructions for 3153 and 4253
1. Position the base mounting plate on the LF Cabinet and align the screw holes as shown in Figure 1.
2. Fasten the base plate onto the LF cabinet using the nine supplied M5 x 15mm screws with a Philips head screw driver.
3. Align the pivot point screw holes found on the bottom of the 3132-M/HF to the front holes on the base plate as shown in
Figure 2.
4. Secure the 3132-M/HF to the base plate using two of the supplied M5 x 10mm screws with a Philips head screw driver.
Figure 1 Figure 2
ASSEMBLY INSTRUCTION GUIDE JBL CINEMA SERIES
1. Tilt the 3132-M/HF Horn to the desired vertical angle for installation and secure in place using the other two M5 x 10mm
screws with a Philps head screw driver as shown in Figure 3.
2. Align the 4-pin female connector of the 3132-M/HF Horn into the male connector on the LF Cabinet paying close attention
to the keying on the connectors and click in place as shown in Figure 4.
Figure 3 Figure 4
Other manuals for Control Series
10
This manual suits for next models
2
Table of contents
Other JBL Speakers manuals
JBL
JBL HLS 810 User manual
JBL
JBL 880 ARRAY User manual
JBL
JBL L300 Summit User manual
JBL
JBL CONTROL CONTRACTOR 200 Series User manual
JBL
JBL 950-0074-001 Quick start guide
JBL
JBL Stage XD-5 User manual
JBL
JBL 305P MkII User manual
JBL
JBL Northridge E Series User manual
JBL
JBL Control 30 User manual
JBL
JBL TLX271P User manual
