JAI CV-S3200 User manual
Operation Manual
DSP Color CCD Cameras
CV-S3200/3300
(Rev.B)
2
CV-S3200/3300
DECLARATION OF CONFORMITY
AS DEFINED BY THE COUNCILDIRECTIVE
89/336/EEC
EMC (ELECTROMAGNETIC COMPATIBILITY)
WE HEREWITH DECLARE THAT THIS PRODUCT
COMPLIES WITH THE FOLLOWING PROVISIONS APPLYING TO IT.
EN-50081-1
EN-50082-1
CV-S3200/3300
3
Table of Contents
CE declaration...........................................................................................................
1. General..................................................................................................................
2. Main features........................................................................................................
3. Standard composition...........................................................................................
4. Pin assignment .....................................................................................................
5. Functions and operations .....................................................................................
5.1 SW1 switch on PK8167 board......................................................................
5.2 On-screen-menu ........................................................................................
5.3 RS 232C functions......................................................................................
6. External appearance .............................................................................................
7. Specifications .......................................................................................................
8. Appendix ..............................................................................................................
8.1 Precautions ................................................................................................
8.2 Typical CCD Characteristics ........................................................................
8.3 References .................................................................................................
9. Users Record.........................................................................................................
2
4
4
5
5
6
6
7
11
12
13
14
14
14
14
15
4
CV-S3200/3300
1. General
The CV-S3200/3300 is a new high-resolution color camera series, available in PAL or NTSC
format. The camera series was developed with JAI's new DSP processor, which has remarkable
high signal to noise ratio as well as a high bit flow. The cameras also have built-in RAM, which
together with the DSP enables the camera to produce field integration with 100% horizontal
resolution.
The CV-S3200/3300 series features EXview HADTM sensors (CV-S3200:1/2" and CV-S3300:
1/3")which are extra light sensitive and have enhanced anti-smear and blooming characteristics.
The cameras run on 12V DC and can be gen-locked or use VBS for external synchronization.
There are connections for video control or direct drive lens, and VBS and Y/C video outputs.
Both cameras have CS/C-mount with a variable mounting ring for back focus. The CV-S3300
has screw terminals for power, gen-lock and line-lock. The CV-S3200 comes with D-sub
connector.
The camera set-up can be performed via the JAI software platform and an RS232C port, or from
a new on-screen menu that can be controlled by the three buttons mounted on the rear of the
camera. Both the software and the on-screen-menu can control the following setting:shutter,
integration, gamma, AGC,H/V enhancer, iris-level for direct drive, positive/negative picture,
back-light compensation, and AWB fixed or manual color temperature.
Applications include surveillance, security, medical and a large variety of other industrial
applications.
1/2" EXview HADTM IT color CCD sensor for CV-S3200,
1/3" EXview HADTM IT color CCD sensor for CV-S3300
NTSC : 768 (h) x 494 (v) , PAL : 752 (h) x 582 (v)
450 TV lines horizontal resolution
Composite VBS and Y/C output
Excellent color reproduction
Field integration mode for higher sensitivity
S/N ratio >50 dB
White balance automatic or manual
Auto iris and CCD iris for light regulation
Manual shutter up to 1/10,000 sec.
Scanning reversal function (mirror-effect mode)
CS-lens mount with focus adjustment
CV-S3200 employs 9 pin Dsub connector at camera rear panel for single cable solution.
CV-S3300 provides 7 pin terminal at camera rear panel for easy cable installation.
2. Main Features
CV-S3200/3300
5
4. Pin assignment
4-1. DC IN/SYNC/RS-232C connector
1
2
3
4
5
6
7
8
9
:
:
:
:
:
:
:
:
:
Ground
+12V DC input
Ground
VBS output
Sync input
Y output
C output
TXD output
RXD input
3. Standard compositions
1)
2)
3)
4)
5)
Camera main body
C-mount adaptor (MP-55)
Auto iris lens pulg (E4-191J-100)
Y/C out plug (TCP8040-01-520)
Operation manual
x 1
x 1
x 1
x 1
x 1
a) 9 pin D-sub connector for CV-S3200
b) 7 pin terminal for CV-S3300
1
2
3
4
5
6
7
:
:
:
:
:
:
:
RXD input
TXD output
Ground
Sync. input
Ground
+12V DC input
Ground
4-40
UNC Thread
6
CV-S3200/3300
4-2. S-VIDEO connector
1
2
3
4
:
:
:
:
Ground
Ground
Y output
C output
4-3. LENS connector
1
2
3
4
:
:
:
:
+9V / Damp-
NC / Damp+
Iris / Drive+
Ground / Drive-
5. Functions and operations
5-1. SW1 switch on PK8167 board
This switch is to select the type of auto iris. It is located on the CCD board (PK8167), as below.
Up
Down :
:Direct drive mode (Passive)
Video controlled (Active)
Note : Factory pre-set is Video controlled.
SW1 switch
CV-S3200/3300
7
5-2. On-screen-menu
5-2-1. Functions
On-screen-menu can be controlled by the “UP”, “DOWN” and “FUNC” switches on the rear panel.
The following functions are adjustable at on-screen-menu.
White balance
Shutter
Gain
Back light compensation
Lens iris
Gamma
Scanning reversal
Sensitive (Field integration)
a) White balance
This function is to adjust the color temperature to make the color of the image correct.
3200 K
4600 K
5600 K
Auto
Manual
One push
For incandescent lamp or halogen lamp.
For white fluorescent lamp.
For daylight.
The TTLsystem is employed for auto white balance, and it detects the
highest video level in objects to recognize a white color.
It is necessary to place the camera in a position where the camera does
not pick up spot lights and fluorescentlights.
To adjust the color temperature between 2700 K to 6700 K.
Refer to 5-2-2 (d).
:
:
:
:
:
:
Note : Factory pre-set is auto white balance.
8
CV-S3200/3300
b) Shutter
This function is used for “freezing” objects and for light regulations. Nine exposure time settings are
available.
Note : Factory pre-set is OFF.
OFF
Selectable shutter
Flicker-less
CCD iris
1/60 sec. (NTSC), 1/50 sec. (PAL)
1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec.
1/100 sec. (NTSC), 1/120 sec. (PAL)
Shutter speed changes automatically.
(1/60 sec. to 1/10000 sec. (NTSC), 1/50 sec. to 1/10,000 sec.(PAL))
:
:
:
:
CAUTION
1.
2.
3.
c) AGC (Auto gain control)
Note : Factory pre-set is AGC OFF.
OFF
+12 dB
+24 dB
Manual
:
:
:
:
Gain is fixed at minimum 0 dB
AGC ON (0 to +12 dB)
AGC ON (0 to +24 dB)
Manual gain
CAUTION
1. Auto iris lens can be used only when the CCD iris is OFF.
Under certain unique light conditions, the following may appear.
- Strong smear and/or blooming on highlighted objects.
- Noticeable flicker in the picture.
CCD iris
Continuous variable electronic shutter controls the exposure time of the CCD sensor, depending on the incoming
light level. When this mode is selected, auto or manual iris lens can be used instead of an auto iris lens.
Shutter speed and sensitive mode
In sensitive made the CCD iris does not function.
CV-S3200/3300
9
d) BLC (Back Light Compensation)
BLC circuit will c0mpensate for extreme highlights in the field of view.
Note : Factory pre-set is OFF.
There are three pre-defined patterns that can be selected. These are shown below. The higher
the value, the more backlight compensation.
CAUTION
The BLC works under the follwing conditions:
It is recommended to switch “BLC OFF” when using the camera with pan/tilt head or if the scene illumination
changes rapidly.
With “BLC ON” the regulation speed of the iris is decreased.
1.
2.
3.
Patten 1 Patten 2
: Effective
: Not-effective
e) Iris level
This is to set the video level, when the camera is set at CCD iris, AGC ON and auto iris.
BLC
AGC ON ON OFF OFF
CCD iris ON OFF ON OFF
Patten 3
1 1 0 0 0 0
4 9 4 0 15 0 0 10 0
1 1 0 0 4 4
10
CV-S3200/3300
Up switch
Function switch
Down switch
f) Gamma
This function is to set the gamma correction.
0.45
0.6
1.0
Correction
Correction
Linear
:
:
:
Note : Factory pre-set is 0.45.
g) Scanning reversal (mirror-effect mode)
This function can change the horizontal scanning between normal and reverse.
OFF
ON Normal scanning
Reversal scanning
:
:
Note : Factory pre-set is set at OFF.
h) Field integration
The sensitivity can be set at these pre-set positions.
OFF
2F
4F
8F
16F
32F
64F
Standard sensitivity (Exposure time = 1 field)
2 times higher than standard sensitivity (Exposure time = 2 fields)
4 times higher than standard sensitivity (Exposure time = 4 fields)
8 times higher than standard sensitivity (Exposure time = 8 fields)
16 times higher than standard sensitivity (Exposure time = 16 fields)
32 times higher than standard sensitivity (Exposure time = 32 fields)
64 times higher than standard sensitivity (Exposure time =64 fields)
:
:
:
:
:
:
:
Note : Factory pre-set is OFF.
Screen display (example)
5-2-2. Operations
White balance Manual
Function buttons for on-screen-menu
Rear panel of CV-S3300 (example)
Red Blue Note : This scroll bar will be displayed when the following
functions are selected.
White balance = manual, AGC = manual, Iris = manual
Other manuals for CV-S3200
1
This manual suits for next models
1
Table of contents
Other JAI Security Camera manuals
