Jadever SNUGIII Series User manual

JADEVER SCALE

SNUGIII 0

CONTENTS

Ⅰ. Preparation before using

1-1. Cautions before using……………………………………………………………

1-2. Specification and characteristics of products ………………………………… 1

Ⅱ. Introduction and installation of products

2-1. Assembly specification of scale pan and windshield ……………………….

2-2. Removal of protecting screws…………………………………………………

2-3. Adjustment of leveler…………………………………………………………...

2-4. Function specification of buttons and display window………………………

Ⅲ. Applications of general functions

3-1.Specification of weighing function……………………………………………..

3-2.Specificatin of counting function……………………………………………….

3-3.Specification of percentage function…………………………………………..

3-4.Setting of time and date…………………………………………………………

Ⅳ. Setting of various parameters

4-1. Entry and parameter adjustment mode……...……………………………….

4-2.Specification of parameter and function……………………………………… 6

Ⅴ. Weight calibration

5-1.List of calibration weights…………………………………………………………

5-2.Linear calibration of weight………………………………………………………

…

5-3.Single-point calibration of weight………………………………………………

Ⅵ.Interface of peripheral devices

6-1. RS-232 specification…………… …………………………………….……....

6-2. Printing format of peripheral devices….………………………………..........

6-3.Specification of USB interface application…………………………………….

Ⅶ.Miscellanies

7-1.Specification of trouble information…………...............................................

7-2.List of unit conversion…………………………………………………………...

7-3.Warranty of product………………………………………………………..…….

JADEVER SCALE

SNUGIII 1

Ⅰ.Preparation before using

1-1 Cautions before using

◎The site for fixing the scale must be stable and even, and its level adjustment may be

performed by referring to page 4 【Adjustment of leveler】.

◎The ambient temperature must not exceed 0℃〜40℃, and the condition with too

drastic temperature fluctuation should be avoided.

◎After starting, the scale must be energized for at least 10 min. before using.

◎The scale must not be used in a condition with strong wind, vibration, or

electromagnetic interference (for example, near the outlet of cool air, in front of a fan, or

near a heavy-duty machine).

◎Never impact or drop the scale, or press the scale with something whose weight

exceeds the maximal capacity of the scale.

◎Never expose the scale to rains or wash the scale with water.

◎Be careful not to let cockroaches or other pest insects enter the scale.

◎Be sure to select the suitable transformer whose output is DC 9V / 400ma (please use a

separate power socket and the transformer delivered by the scale manufacturer in order

to avoid interference)

◎Change the batteries as soon as possible when battery symbol appears; if the scale

uses batteries as its main power supply and the scale will be idle for a long term, the

batteries must be removed to avoid the damage of scale due to the leakage of battery

electrolyte.

※Application of improper batteries or wrong connection may lead to the failure of system

or other adverse effect.

1-2 Specification and characteristics of products

Model SNUG III-150 SNUG III-300 SNUG III-600 SNUG III-600 SNUG III-3000

Capacity (g) 150 300 600 1500 3000

Resolution (g) 0.005/0.002 0.01/0.005 0.01/0.02 0.05/0.02 0.1/0.05

Display LCD and backlight sheet, 14mm(H)X7mm(W) weight--- 6 digitals

Pan size

(mm) 125 stainless

steel round pan 146×125 stainless steel square pan

Overall size 245×175×147

Power supply 9V DC transformer 50/60Hz, or 2# dry battery*4

JADEVER SCALE

SNUGIII 2

Ⅱ. Introduction and installation of products

2-1 Assembly specification of scale pan and windshield

Assembly of scale pan

1. In order to avoid the possible damage

while assembling the scale pan, please

make sure that the transportation

protecting screw (A) has been locked.

2. The pan set is consisted of a plastic base

and a stainless steel pan, please put

plastic base (B) on the scale first.

3. Use Philips screwdriver to lock fixing

screw (C) in the center of plastic base.

4. Put stainless steel pan (D) on plastic

base, and then loose transportation

protecting screw.

Assembly of windshield

1. Windshield is consisted of 5 components,

and they must be assembled together

before being used.

2. First assemble four sides of windshield (A,

B) by inserting A into B from top to bottom

(or from bottom to up).

3. Place the assembled windshield on the

scale body; make sure that the position of

D should face downwards, or rotate the

assembled windshield up and down if it

fails to be clutched after being placed on.

4. Then place upper cover (C) of windshield

on.

2-2 Removal of protecting screws

1. As shown by the arrow in the right figure,

you may turn anticlockwise the

transportation protecting screw direct with

fingers to loose it.

2. For locking the screw, you may push

gently the screw inwards with fingers

meanwhile turn it clockwise.

3. The transportation protecting screw must

be locked while transporting, storing,

disassembling or assembling the scale.

JADEVER SCALE

SNUGIII 3

2-3 Adjustment of leveler

1. Leveler (A) is located at the left side of

operation panel; the standard for judging if

the scale body is placed horizontally is that

if the bubble (C) is within the circle (B) .

2 In case the bubble is outside the circle, you

should adjust four adjusting feet (D) at the

bottom of the scale with hands direct.

3. Adjustment: the bubble will move towards

the highest foot, therefore it is enough to

raise the foot that is in the opposite

direction of the bubble, and the scale will

be horizontal.

2-4 Function specification of buttons and display window

Button for Start/Stop.

Button for zeroing. It returns the weight to zero, may return the value displayed on

screen to “zero” position (zeroing range is ±2% of the full range).

Button for deduction of tare, used to deduct the weight of article on the pan.

Button for shifting weighing function; it may be cycled from weighing mode, counting

mode, percentage mode to printing time setting mode sequentially.

Button for shifting weighing units; total 13 weighting units may be selected.

Button for switching on/off backlight under the weighing mode (the button will take

effect only when backlight is set to ON or OFF). It is the button for sampling entry

and sampling execution under counting mode and percentage mode.

JADEVER SCALE

SNUGIII 4

Ⅲ. Applications of general functions

3-1 Specification of weighing function

1. Press down button to start the scale; this time the whole screen will be displayed

and then count down, when screen shows 0.00 X , the scale may be used to weigh;

if backlight is needed, please press down button . (It is not need to press down

the button if Auto backlight is set).

2. Press down button to deduct the weight of article; press down button to

cancel the deduction.

(Note: if the deducted weight is within the zeroing range, the deduction may be

cancelled and the scale is zeroed)

3. Press down button to shift the weighing units.

Caution: the symbol of weighing unit will flash when the weight becomes unstable

during the weighing.

3-2 Specification of counting function

1. Under the weighing mode, press down button to show XXXX pcs on screen

and to enter the counting function.

2. Then press down button to enter the sampling mode for counting, and SE 0pcs

will be displayed on screen this time; please press down button to select one out

of the following five sampling quantities in a cyclic manner: 20, 50, 100, 200, and 500.

3. After selecting the sampling quantity, place the article whose quantity is the same with

the selected one on the scale pan, and press down button to begin sampling;

when the sound “bi” is heard and “SE” is disappeared, the sampling process is

completed.

JADEVER SCALE

SNUGIII 5

4. Press down button to display “Unit weight of article” and “Counting value” in a

cyclic manner.

Caution: the minimum unit weight of sampled article ≥9 resolutions. (For example:

the weight of sampled article for 600g/0.01g should not be less than 0.09g)

3-3 Specification of percentage function

1. Under the weighing mode, press down button to show XXXX % on screen and to

enter the percentage function.

2. Then press down button to enter the sampling mode for percentage function; this

time screen will show SE 0pcs ; then press down button to select one out of

the following five sampling quantities in cyclic manner: 20, 50,100, 200, and 500.

3. After selecting the sampling quantity, place the article whose quantity is the same with

the selected one on the scale pan, and press down button to begin sampling;

when the sound “bi” is heard and “SE” is disappeared, the sampling process is

completed.

4. Press down button to display “Unit weight of article” and “Percentage” in a cyclic

manner.。

Caution: the minimum unit weight of sampled article ≥9 resolutions. (For example:

the weight of sampled article for 600g/0.01g should not be less than 0.09g)

3-4 Setting of time and date

1. After starting, press down button to show time XX.XX T on screen.

2. Press down continuously button to shift months XX.XX D and years XXXX Y.

3. Shift to the part to be modified, press down button to shift for selecting the digit to

be modified, and the selected digit will flash this time; then press down button to shift

among 1~9 sequentially, and press down button to exit after completing the setting.

JADEVER SCALE

SNUGIII 6

Ⅳ. Setting of various parameters

4-1 Entry and parameter adjustment mode

Procedure 1: Under Stop mode, hold down button and then press down

button and then release button to enter the mode of parameter display.

Procedure 2: Press down button to select “Option of main functions” in a cyclic

manner, and press down button to enter “Internal option” to make modification, and

then press down button to select “Internal option”.

Procedure 3: After completing the modification of internal options, press down

button to exit; in case the next option should be set, press down button to

go to the next option.

Procedure 4: After completing all settings, press down button to end the setting of

functions to return to the normal weighing mode.

4-2 Specification of parameter and function (The item marked with ☆is set at

delivery)

Option of main functions Internal options

Item Specification Item

Specification of internal

options

Internal value

Note: for maintenance

and setting

-------------------- ------------------------

JADEVER SCALE

SNUGIII 7

☆g (GRAM) ON(in use) or OFF(not in use)

Ct (MET.CARAT) ON(in use) or OFF(not in use)

(AVORIRDUPOIS

POUND)

ON(in use) or OFF(not in use)

(AVORIRDUPOIS

OUNCE))

ON(in use) or OFF(not in use)

Dr ON(in use) or OFF(not in use)

(GRAIN (U.K)) ON(in use) or OFF(not in use)

Selection of units to be

used

Note: the unit that won’t

be used may be

cancelled

temporarily.

Press down button

to select ON/OFF and

complete the setting.

Ozt

(TROY OUNCE) ON(in use) or OFF(not in use)

Dwt

(PENNY WEIGHT) ON(in use) or OFF(not in use)

MM (JPN) ON(in use) or OFF(not in use)

tl.j

(HONGKONG JE

WELRY TAEL)

ON(in use) or OFF(not in use)

tl.T (TAEL(TWN)) ON(in use) or OFF(not in use)

tl.H

(HONGKONG

TAEL)

ON(in use) or OFF(not in use)

t (INDIA) ON(in use) or OFF(not in use)

☆g (GRAM) ------------------------

Ct (MET.CARAT) ------------------------

(AVORIRDUPOIS

POUND)

------------------------

(AVORIRDUPOIS

OUNCE)

------------------------

Dr ------------------------

Starting unit

Note: the unit used

promptly after

starting

GN (GRAIN (U.K)) ------------------------

JADEVER SCALE

SNUGIII 8

Ozt

(TROY OUNCE) ------------------------

Dwt

(PENNY WEIGHT) ------------------------

MM (JPN) ------------------------

tl.j

(HONGKONG JE

WELRY TAEL)

------------------------

tl.T

(TAEL(TWN)) ------------------------

tl.H

(HONG KONG

TAEL)

------------------------

t (INDIA) ------------------------

AU-no No function of Auto Stop

AU-5 Auto Stop 5 min later

AU-15 Auto Stop 15 min later

AU-30 Auto Stop 30 min later

Setting of Auto Stop

time

Note: if a scale is started

and becomes stabilized

but it is still idle, it will stop

automatically according to

the set time. ☆AU-60 Auto Stop 60 min later

2400 ------------------------

4800 ------------------------

Setting of RS-232

transmission

function

Note: Selection of

transmission speed

☆9600 ------------------------

d 0 No limitation of zero display

d 1

In case the indication is below

zero, the value may be

displayed only after at least 2

resolutions are loaded.

☆d 2

In case the indication is below

zero, the value may be

displayed only after at least 3

resolutions are loaded.

Range of zero

display

Note: It may improve zero

draft caused by

environment or other

interferences.

d 3

In case the indication is below

zero, the value may be

displayed only after at least 4

resolutions are loaded.

JADEVER SCALE

SNUGIII 9

d 4

In case the indication is below

zero, the value may be

displayed only after at least 5

resolutions are loaded.

d 5

In case the indication is below

zero, the value may be

displayed only after at least 6

resolutions are loaded.

FIL 1 The application environment

of the scale is excellent.

☆FIL 2 The application environment

of the scale is good

FIL 4 The application environment

of the scale is adequate

Anti-vibration

function

Note: it may improve the

weighing instability

caused by environment

and other interferences. FIL 8 The application environment

of the scale is poor

☆onoff Auto backlight

off No backlight

Backlight mode of

display window

Note: there are three

backlight modes that may

increase effectively the

convenience of

application.

on Backlight keeps ON

☆Pr-co

Signals transmit continuously.

In case this option is

selected, peripheral devices

may only be set to “PC”.

Setting of printing

mode

Note: the mode of signal

transmission. Pr-st

Signals transmit automatically

only when the weighing

process becomes stabilized.

In case this option is

selected, all options for

peripheral devices may be

selected.

☆PC Computers

SH-24 Common printers

ZEBRA Option specially for Zebra

printer

Selection of

peripheral devices

Note: It may support the

general requirement of

peripheral devices. The

model of built-in printer is

also the common

commercial mode.

BP-443 Thermosensitive printer

This manual suits for next models

Table of contents

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual