Jabra GN9120 Flex User manual

Jabra GN9120 Flex NC Microphone With EHS

How to connect my Jabra GN9120 EHS / GN9125 EHS with

Nortel IP 1120E, 1140E, 1150E, 1165E

Prerequisite:

Jabra GN9120 EHS + Jabra Link 14201-32 (from FW 2.2.0)

Jabra GN9125 EHS + Jabra Link 14201-32 (from FW 2.2.0)

In combination with one of the following phones:

Nortel IP 1120E

Nortel IP 1140E

Nortel IP 1150E

There is a minimum revision level (UNIStim 5.2) needed when using our

EHS adapter on Nortel 1140e with CS2100 server. The CS1000 is OK

with 3.1 or greater. It can be downloaded from

http://support.nortel.com.

Connection:

1. Connect the 1-sided end (USB plug) of the EHS adapter with the USB

socket on your phone phone.

2. Insert the RJ10 plug into the socket identified with the “phone”

symbol and the RJ45 plug into the socket identified with "AUX" on

the base.

EHS setup:

The Jabra GN912x must support and be set up on DHSG EHS.

Proceed as follows to check the EHS installed:

23/01/2024 09:32

https://www.jabra.in/supportpages/jabra-gn9120/9120-28-11/faq/50e3d2d4-4986-

4d9b-b283-11c16b2ceb5f

Page 1 of 4

1. Place the headset on the base and press the PLUS and MINUS

buttons simultaneously for approx. 6 seconds until the online display

on the headset starts to flash.

2. The base will now display to you the EHS currently installed. The

online light indicates "MSH", the pulsating light indicates "RHL", the

MUTE light "DHSG" and the battery display "AEI".

3. With the PLUS or MINUS buttons, you can now switch between the

different EHS types.

4. To confirm the EHS has successfully installed, the base automatically

switches back to charge mode after approx. 10 seconds.

Base setup:

Set the phone set-up switch (A-G) to "A".

23/01/2024 09:32

https://www.jabra.in/supportpages/jabra-gn9120/9120-28-11/faq/50e3d2d4-4986-

4d9b-b283-11c16b2ceb5f

Page 2 of 4

Microphone level setup:

1. To do this, please call someone with the headset.

2. You must now simultaneously press the PLUS and MINUS buttons on

the headset which immediately produces a signal tone.

3. You can now increase the microphone volume with the PLUS or

decrease it with MINUS.

4. To confirm, after approx. 5 seconds a low signal tone sounds in the

headset. The settings are then automatically saved.

Phone setup:

You must enable Headset option on the telephone. Services /Telephone

Options / On Hook Default Audio Path / Headset Enabled. When phone is

idle, customer must press "Services" button twice quickly. Then

there will be one of two options: If they see "password", enter default:

"26567*738" then follow the below info. If they see "Preferences", then

they choose "3" for headset/active headset device and select "USB". Be

23/01/2024 09:32

https://www.jabra.in/supportpages/jabra-gn9120/9120-28-11/faq/50e3d2d4-4986-

4d9b-b283-11c16b2ceb5f

Page 3 of 4

sure "HID commands" is enabled. Press "apply" to save the settings.

Also be sure phones (idle & active) ring settings are set to "default".

23/01/2024 09:32

https://www.jabra.in/supportpages/jabra-gn9120/9120-28-11/faq/50e3d2d4-4986-

4d9b-b283-11c16b2ceb5f

Page 4 of 4

Other manuals for GN9120 Flex

22

This manual suits for next models

2

Table of contents

Other Jabra Headset manuals

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual