Jabra Engage 65 Mono User manual

Table of contents

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual

Jabra Engage 65 Mono

How do I use my Jabra Engage 65/75 wireless headset as a

corded USB audio device?

Prerequisites

Firmware version 2.0.5

Jabra Direct - latest version

To use your Jabra Engage 65/75 wireless headset as a wired USB audio

device, use one of the following options:

Option 1

1. Insert the USB cable into a USB port on the computer.

2. Press and hold the volume up (+), volume down (-), or Mute button.

3. Insert the USB cable into the headset.

4. The headset LED will flash green. When it stops flashing, release the

button. You can now select the Jabra Engage 65/75 as an audio

device on the computer.

Option 2

1. Insert the USB cable into the headset.

2. Put the headset on.

3. Press and hold the volume up (+), volume down (-), or Mute button.

4. Insert the USB cable into a USB port on the computer.

5. When you hear the power-on tone in the headset, release the button.

You can now select the Jabra Engage 65/75 as an audio device on the

computer.

The headset will return to DECT mode after 5 seconds if the USB wired

mode is not established.

To change your headset back to a wireless connection, disconnect the USB

10/01/2022 18:10

https://www.jabra.co.nz/supportpages/jabra-engage-65/9553-553-117/faq/680cce09-

960c-4808-a8c9-7125bb6c6747

Page 1 of 3

cable from the headset. The headset will automatically reconnect to the

base when it is within range.

Note

When your headset is connected as a wired USB audio device, call controls

and the busylight feature on the headset are not supported.

Important

If a cable (e.g. a charging or audio cable) is connected to the USB port in

the headset, you may notice a slightly elevated temperature around the

USB port. A slightly elevated temperature is normal and within safety

operating requirements and has no bearing on the lifespan or performance

of the headset. If you however, experience that the headset generates

significant heat or gets significantly warmer than usual when charging or

in use, it is recommended to immediately stop using the headset and

contact the Jabra reseller where you have bought the headset.

10/01/2022 18:10

https://www.jabra.co.nz/supportpages/jabra-engage-65/9553-553-117/faq/680cce09-

960c-4808-a8c9-7125bb6c6747

Page 2 of 3

Applicable products

Jabra Engage 65

Convertible

Jabra Engage 75

Convertible

Jabra Engage 75

Mono

Jabra Engage 75

Stereo

Jabra Engage 65

Mono

Jabra Engage 65

Stereo

10/01/2022 18:10

https://www.jabra.co.nz/supportpages/jabra-engage-65/9553-553-117/faq/680cce09-

960c-4808-a8c9-7125bb6c6747

Page 3 of 3