IOGear GUC232A Quick start guide
IOGEAR USB to Serial Adapter
Mac OS (8.6 through 9.2) Installation Procedure
NOTE: Please do not plug in the USB to Serial Adapter until after you have completed
the following instructions.
1) Insert the IOGEAR CD-ROM that came with your USB to Serial Adapter Cable.
You will see an IOGEAR CD icon appear on your desktop.
2) Double-Click the IOGEAR CD-ROM icon, you will see two folders: one for Mac OS
9 and one for Mac OS 10. Double-click the OS 9 folder.
3) Inside the Mac OS 9 folder, you will see the UC232-AC Extention. This is the
extension for the IOGEAR USB to Serial Adapter and it must be placed in your
Extensions folder in Mac OS.
4) Open your Macintosh HD
5) Open the System folder
6) Open the Extensions folder
7) Drag-and-drop the UC-232AC extension into you Macintosh Extensions folder.
If you have done this successfully, it will show up under the Extensions folder below
8) Close all your open windows, and restart your Mac.
The USB to Serial Adapter is now installed on you Macintosh computer.
Other manuals for GUC232A
3
Table of contents
Other IOGear Adapter manuals
IOGear
IOGear GWU735 User manual
IOGear
IOGear GBU521 User manual
IOGear
IOGear GBU521 User manual
IOGear
IOGear GUE310 User manual
IOGear
IOGear GUC210T User manual
IOGear
IOGear GigaLinq Pro 3.1 User manual
IOGear
IOGear Enhanced Data Rate Bluetooth USB Adapter... User manual
IOGear
IOGear GBU421 User manual
IOGear
IOGear GPU202 User manual
IOGear
IOGear GWU637 User manual
IOGear
IOGear GWU523 User manual
IOGear
IOGear GKMB01 User manual
IOGear
IOGear GWU625 User manual
IOGear
IOGear GUF202 User manual
IOGear
IOGear GBU521 User manual
IOGear
IOGear GWU735 User manual
IOGear
IOGear GBP201 User manual
IOGear
IOGear GWU625 User manual
IOGear
IOGear GBU321 User manual
IOGear
IOGear GWAVR User manual
