InWin IW-RS104-07 User manual

IWIW

RS104

RS104RS104

RS104

0707

User Manual

User ManualUser Manual

User Manual

Table of Contents

PREFACE ....................................................................................................................................... 1

SAFETY INFORMATION ................................................................................................................. 1

CAUTION ...................................................................................................................................... 2

SPECIFICATIONS ............................................................................................................................ 3

12Gb/s BACKPLANE SPECIFICATIONS ............................................................................................ 5

1 Product I troductio ............................................................................................................. 6

1.1 Box Contents ................................................................................................................. 6

1.2 Accessories Box ............................................................................................................. 7

1.3 General Information ...................................................................................................... 8

1.3.1 Front Panel Controls and Indicators ................................................................................. 9

1.3.2 Rear Panel Configuration ............................................................................................... 10

2 Hardware I stallatio ......................................................................................................... 11

2.1 Motherboar & Expansion Car Installation ................................................................ 11

2.2 HDD Tray Installation ................................................................................................... 11

2.3 Backplane Connection ................................................................................................. 11

2.4 Fan Installation ........................................................................................................... 11

2.5 Power Supply Installation ............................................................................................ 11

2.5.1 Power Supply Ca le Information ................................................................................... 12

2.6 Internal HDD Installation…………………………………………………………..………………………………14

2.7 Connecting Cables ....................................................................................................... 14

2.7.1 Connecting Backplane Through SAS Connectors ........................................................... 14

2.7.2 Connecting LED Ca le, Front Control Panel and Front USB I/O Ports ........................... 14

2.8 Installing the Sli e Rail ................................................................................................ 15

2.8.1 Identifying the Slide Rail ................................................................................................ 15

2.8.2 Installing the Slide Rail ................................................................................................... 15

2.8.3 Mounting the chassis onto the ca inet ......................................................................... 16

3 Backpla e I troductio ....................................................................................................... 18

4 Compatibility Lists .............................................................................................................. 19

5 Q & A .................................................................................................................................. 20

6 Tech ical Support ................................................................................................................ 21

PREFACE

Thank you for choosing the InWin IW-RS104-07. This manual is written for system technicians who

are responsi le for installation, trou leshooting, managing and repairing this server chassis. This

document provides an overview of all the features of the chassis, a list of accessories or other

components you may need to finish the installation, trou leshooting methods and instructions on

adding and removing components in the InWin IW-RS104-07. For the latest version of this manual,

you may visit InWin’s server we site.

SAFETY INFORMATION

To ensure a safe and smooth operation of your InWin IW-RS104-07, it is essential that you choose

an appropriate location for the system, provide an appropriate operating environment and supply

an adequate amount of power for all components of the system. As you plan for installation, follow

the guidelines elow to ensure that the system and its environment are safely and appropriately

positioned for efficient operation and service. Your system should e installed and serviced only y

a qualified technician.

Environment Selection: The system is designed to operate in a typical office environment:

•The location should e clean, dry and free of air orne particles.

•It should e placed in a well-ventilated room, and away from sources of heat including direct

sunlight and radiators.

•It should e kept away from sources of vi ration or physical shock.

•The space should e accommodated with a properly grounded wall outlet, and with sufficient

space to access the power supply cords.

•The operating environment temperature should e around 0°C to 40°C (32°F to 104°F).

Hee Safety Instructions: Before working with InWin IPC/storage server products, we strongly

recommend you use this guide as a reference and follow the safety instructions. The instructions in

this manual will help you ensure and maintain compliance with existing product certifications and

approvals. Follow the descri ed, regulated components mentioned in this manual. Use of non-UL

listing products or other regulators may not comply with product regulations in the region(s) in

which the product is sold.

System Power On/Off: The power utton DOES NOT totally turn off the system AC power. To remove

the power of the system, you must unplug the AC power cord from the outlet or the system’s power

supply units. Make sure the power cord is unplugged efore you open the chassis, add or remove

any components.

Hazar ous Con itions, Devices an Cables: Hazardous electrical conditions can e present on/in

power supply units and their ca les. Disconnect the power cord and any other devices attached to

the server efore opening the case. Failing to follow safety procedures will increase the risk of

personal injury or equipment damage.

Electrostatic Discharge (ESD) an ESD Protection: In most cases, ESD may damage disk drives,

electronic oards and other parts. We recommend that you conduct installation only at an ESD free

space. If not possi le, perform ESD protection protocol y wearing anti-static wrist straps attached

to the ground on any unpainted metal surface on your server during operation.

Installing or Removing Jumpers: A jumper is a short length conductor used to close, open or ypass

part of an electronic circuit. Jumpers on InWin ackplanes have a small ta on top that you can pick

up with your fingertips. Grip the jumper carefully and plug the jumper to cover the jumper pins on

the ackplane. Once you need to remove the jumper, grip the jumper and carefully pull without

squeezing.

CAUTION

To avoid damage and maintain your safety, please read the following terms listed elow:

1. Do not populate hard drives and turn on the power until the system has sta ilized.

Make sure hard drives and other components are properly connected efore

turning on the system.

2. Tighten or loosen all screws with a screwdriver.

3. Apply the correct screws packed in the accessories ox.

4. For your safety, please have at least two people lift and install the unit in its

designated area.

5. Before mounting the unit to the ca inet, make sure the rail is installed correctly.

6. When installing and removing any module or part, please use the handles.

SPECIFICATIONS

Mo el Name RS104-07

In ustry Stan ar EIA-RS310D

M/B Form Factor ATX (12" x 9.6"), CEB (12" x 10.5"), EEB (12" x 13")

Drive Bay

• External: Supports Slim ODD x 1

Supports 2.5"/3.5" screwless hot-swap trays x 4

• Internal: 2.5" x 2 or x 3 (via Slim ODD conversion tray)

Power Supply

Supports:

• 750W 1U 1 + 1 redundant PSU, 80 Plus Platinum

• 650W 1U single PSU, 80 Plus Gold

In icator Power LED, LAN1/LAN2/LAN3/LAN4 LED, System LED, HDD LED, ID LED

Front Control Panel Power on/off, Reset, NMI, ID SW, USB 3.0 x 2

Backplane-

-1 • Host: Mini-SAS HD (SFF-8643) x 1, Slimline (SFF-8654) x 4

• HDD: NVMe/SAS/SATA (SFF-8639) x 4

Backplane-

-2 • Host: Mini-SAS HD (SFF-8643) x 1, Oculink (SFF-8611) x 4

• HDD: NVMe/SAS/SATA (SFF-8639) x 4

Backplane-3 • Host: Mini-SAS HD (SFF-8643) x 1

• HDD: SAS/SATA x 4

Cooling Fan 40 x 56mm PWM easy-swap fans x 6, 21500RPM modular design with

anti-vi ration

Expansion Slot Full-height PCIe slot x 1 (via riser card)

Material • Material: SGCC

• Thickness: 1.0mm

Rail Kit Supports 28" tool-less & all- earing slide rails

Pro uct Dimensions

(D x W x H; Chassis Only)

676.5 x 438 x 43.4mm (26.6" x 17.2" x 1.7")

Packaging Dimensions

(D x W x H) 820 x 590 x 175mm

Weight (Chassis Only) • Net weight: 7.74kg

• Gross weight: 10.53kg

Cubic Feet 2.99

Container Information

Single packing with pallets:

• 20': 200pcs

• 40': 460pcs

• 40' HQ: 552pcs



The actual product is su ject to change without prior notice. InWin Development Inc. reserves the right

to make any final modifications.



The adjacent image is for reference only. All hardware components and optional parts are not included.

Product Dimensions

12Gb/s BACKPLANE SPECIFICATIONS

Backplane-

-1 Slimline Backplane

Dimensions (W x H) 416.6mm x 33mm

Backplane Type Passive

Host Interface Mini-SAS HD (SFF-8643) x 1, Slimline (SFF-8654) x 4

HDD Interface NVMe/SAS/SATA (SFF-8639) x 4

Backplane-

-2 Oculink Backplane

Dimensions (W x H) 416.6mm x 33mm

Backplane Type Passive

Host Interface Mini-SAS HD (SFF-8643) x 1, Oculink (SFF-8611) x 4

HDD Interface NVMe/SAS/SATA (SFF-8639) x 4

Backplane-

-3 SAS/SATA Backplane

Dimensions (W x H) 416.6mm x 33mm

Backplane Type Passive

Host Interface Mini-SAS HD (SFF-8643) x 1

HDD Interface SAS/SATA x 4

1Pro uct Intro uction

1.1 Box Contents

When you open the IW-RS104-07 ox, the contents should include following:

1.2 Accessories Box

No.

Item No.

Item

1 Accessories Box 7 Soldera le Standoffs x 2

2 La el x 1 8 6 + 7-pin SATA to SATA Device x 1

3 Power LED 3-pin to 2-pin Adapter x 1 9 2.5" SSD screws x 24

4 Ca le Ties and Mounts x 5 10

Backplane Jumper x 1

5 Mother oard Screws x 11 11

Single Power Supply Accessories

a. Countersunk Flat Head Screws x 2

. Oval Head Screws x 4

c. Mounting Bracket x 1

6 Mother oard Stand-off Sockets x 11 12

Re un ant Power Supply Accessories

a. Screws x 6

. Mounting Brackets x 2

Other manuals for IW-RS104-07

Table of contents

Popular Chassis manuals by other brands

Advantech

Advantech IPC-623 Series user manual

IMC Networks

IMC Networks iMcV/18 installation guide

Chenbro

Chenbro RB13804N4WFT user manual

Lenovo

Lenovo ThinkSystem SR665 V3 user guide

Wuntronic

Wuntronic PCI4DRQ user guide

EtherWAN

EtherWAN EMC400 quick start guide

Overland Storage

Overland Storage SnapSAN S1000 Replacement instructions

Philips

Philips LC4.1E A Service manual

Supermicro

Supermicro SCF418 Series user manual

Chenbro

Chenbro RM437 Series user manual

Pickering

Pickering 40-914 user manual

HP A7503-S Product End-of-Life Disassembly Instructions

Supermicro

Supermicro SC823MTQ-R700LPB user manual

SilverStone

SilverStone RMS08 Series manual

NI cRIO-FRC II User manual and specifications

Pickering

Pickering 65-200 user manual

Allied Telesis

Allied Telesis AT-MMCR18 installation guide

Hisense

Hisense MSD6586 Service manual