InWin IW-PE689 User manual
IW- PE689
Pedestal Entry Server Chassis
(Please read the following steps to assemble)
Please note that the pictures in this installation
guide are for your reference only, and they
may vary from the actual product.
2.Remove the Front Panel
Unlock the locking tabs and remove the front panel.
= Opening the Chassis =
Installation Guide
1.Remove the Side Covers
Unscrew the Thumb screws and remove both side covers.
IW- PE689
Pedestal Entry Server Chassis
3.Insert the power supply to
the chassis with the power
supply fan facing down.
Use the mounting screws to
secure the position.
= Power Supply Installation =
4.Please follow M/B
Installation Guide to
connect power cables
to M/B.
= Motherboard Installation =
5.Connect all cables to M/B. (Included USB,
HDD LED, HD Audio, Power Switch, Power
LED, Reset Switch, Intrusion switch).
= Front I/O Wires Installation =
USB Header HD AUDIO Header
(white)(Orange) -+
(white)(Brown) -+
(white)(Red) -+
(white)(Blue) -+
(white)(Blue) -+
VCC2
(RED)
VCC1
(RED) 21
D2-
(WHITE)
D1-
(WHITE) 43
D2+
(GREEN)
D1+
(GREEN) 65
GND
(BLACK)
GND
(BLACK) 87
KEYNC 9 10
MIC
(BROWN)
AUD_GND
(BLACK) 21
MIC_BIAS
(ORANGE)
AUD_GND
(BLACK) 43
FP_OUT_R
(GREEN)
FP_RET_R
(YELLOW) 65
AUD_VCC
(RED)
KEY 8
FP_OUT_L
(PURPLE / WHITE)
FP_RET_L
(BLUE) 9
Intrusion Switch Header
AC’97 Audio Header
10
MIC
(BROWN)
AUD_GND
(BLACK) 21
MIC_BIAS
(ORANGE)
AUD_GND
(BLACK) 43
FP_OUT_R
(GREEN)
FP_RET_R
(YELLOW) 65
AUD_VCC
(RED)
KEY 8
FP_OUT_L
(PURPLE / WHITE)
FP_RET_L
(BLUE) 9
CNC
NO
When the side cover
is opened.
When the side cover
is closed.
CNC
NO
6.Pull the “ODD Secure Clips”, put the
5.25”optical drive in and then press the
clips.Refer from the M/B Quick Reference
and Manual to connect the signal cable and
power cable.
= 5.25 ODD Installation =
7.Pull the FDD Secure Clips, push the FDD
Lock to the left, insert the FDD and press
down the clips. Refer from the M/B Guideline
to connect the signal cable, and then connect
the output power cable.
= 3.5” Floppy Installation =
Front Panel Header
IW- PE689
Pedestal Entry Server Chassis
10.Press down the tool-free PCI clips and
remove the expansion slot cover
= Add-On (PCI/AGP) Card Installation =
8.Rear Fan installation
Connect the power cord to the Motherboard.
= FAN Installation =
9.Front FAN Installation (optional)
Unscrew the fan holder.
Put the fan on the fan holder and screw it tightly.
Put the fan holder into server case and screw it tightly. Connect the
power cord to the motherboard.
11.Install PCI/AGP Card and clip on tool-free
I/O slots = Completing Installation =
13.Put back the front panel.
14.Put back the side panels and secure them by
Thumb Screws
= Panel Installation =
12.Take out the HDD bracket, screw the HDD
on the bracket and insert back the HDD
Bracket to the case.Refer from the M/B
Quick Reference or Manual to connect the
signal and power cable.
= Internal 3.5” HDD Installation =
Other InWin Chassis manuals
InWin
InWin Explorer User manual
InWin
InWin 303 User manual
InWin
InWin Chopin Pro User manual
InWin
InWin IW-PLM User manual
InWin
InWin IW-RS110-07 User manual
InWin
InWin 3RAMPD017600 User manual
InWin
InWin SIII-1065W User manual
InWin
InWin 805 User manual
InWin
InWin Cobra IW-RS212-07 User manual
InWin
InWin 101 TUF GAMING User manual
