INVENTOR APSI-30 User manual

Wall Mounted Unit

Owner’s Manual

Models

66129903948

Thank you for choosing INVENTOR air

conditioning system. For correct use of this unit,

please read this manual carefully and keep it for

future reference.

APSI-30 / APSO-30

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１

■ ．．．．．．．．．．．．．．．．．．．４

■ ．．．．．．．．．．．．．．．．．．．．．５

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１１

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１３

■

．．．

．．．．．．．．．．．．．．１８

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１９

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．２１

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１６

■ ．．．．．．．．．．．．．．．．．２３

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．３

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１０

Do not dispose this product as unsorted municipal waste.

Collection of such waste separately for special treatment

is necessary.

CONTENTS

Operation and maintenance

Notices for operation

Notices for use

Names and functions of each part

Operation of wireless remote control

Clean and care

Troubleshooting

Installation service

Notices for installation

Installation dimension diagram

Install indoor unit

Install outdoor unit

Check after installation and test operation

This symbol stands for the items

should be forbidden

This symbol stands for the items

should be followed

Emergency operation

The figures in this manual may be different with the material objects, please refer

to the material objects for reference.

．．．

．．．．．．．．．．．

．．．

■Installation and Maintenance of Healthy Filter ．．．．．．．．．．．．．．２４

★

The power supply

must adopt the

special circuit that with air

switch protection and assure

★

★Keep combustilble

spray away from the

units more than 1m.

★

Don't block the air

intake or outlet vents

of both the outdoor and indoor

units.

It can decrease the air conditioning

capacity or cause a malfunction.

Don’t leave windows

and doors open for

a long time while operating

the air conditioner.

It can decrease the air

conditioning capacity.

It can cause a fire or explosion

Don’t attempt to

repair the air

conditioner by yourself.

The wrong repair will lead to

an electric shock or fire, so

you should contact the service

center to repair.

Be sure to pull out

the power plug as

the air conditioner not in use

for a long time.

Otherwise, the accumulated

dusts that may cause over

heating or fire.

Never splice the

power cord or use

an extended cord.

It can cause overheating or

fire.

When having a

burning smell or

smoke, please turn off the

power supply and contact

with the service center.

If the abnormity still exists,

the unit may be damaged,

and may cause electric

shock or fire.

Please read the following carefully before operating

Notices for operation

components would be easily

damaged, when the voltage

is very low, the compressor

vibrates terribly and that the

refrigerant system will be

damaged, the compressor

and electric components

cannot work, the voltage

should be stable; there

shouldn’t be big fluctuation.

When the voltage

is very high, the

it has enough capacity.

The unit will be turned on or

off according to your requirement

automatically, please do not

turn on or turn off the unit

frequently, otherwise disadv-

antage effect may be caused

to the unit.

★ ★

★★

★

Don’t apply the cold wind to

the body for a long time.

It can cause the health problems.

Splashing water on the air

conditioner can cause an electric

shock and malfunction.

Don’t place a space heater

near the air conditioner.

Don’t blow the wind to animals

and plants directly. It can cause

a bad influence to them.

Don’t insert your hands or stick into

the air intake or outlet vents.

Don’t use the air conditioner

for other purposes, such as

drying clothes, preserving foods, etc.

To adjust the airflow direction

appropriately. When operating

the unit, to adjust the vertical and lateral air

flow direction by use of remote controller.

Swing louver Guide louver

Please don't cut off or damage the

power cords and control cords.

If they are damaged, please ask the qualified

personnel to change them.

Notices for operation

Working principle and special functions for cooling

Principle:

Air conditioner absorbs heat in the room and transmit to outdoor and discharged, so that

indoor ambient temperature decreased, its cooling capacity will increase or decrease by

outdoor ambient temperature.

Anti-freezing function

If the unit is running in COOL mode and in low termperature, there will be frost formed on

the heat exchanger, when indoor heat exchanger temperature decreased below 0, the

indoor unit microcomputer will stop compressor running and protect the unit.

Working principle and special functions for heating

Principle:

* Air conditioner absorbs heat from outdoor and transmits to indoor, in this way to increase

room temperature. This is the heat pump heating principle, its heating capacity will be

reduced due to outdoor temperature decrease.

* If outdoor temperature becomes very low, please operate with other heating equipments.

Defrosting:

*When outdoor temperature is low but high humidity, after a long while running, frost will

form on outdoor unit, that will effect the heating effect, at this time, the auto defrosting

function will act, the heat running will stop for 8-10mins.

*During the auto defrosting, the fan motors of indoor unit and outdoor unit will stop.

*During the defrosting, the indoor indicator flashes, the outdoor unit may emit vapor.

This is due to the defrosting, it isn't malfunction.

*After defrosting finished,the heating will recover automatically.

Anti-cool wind function:

In Heat mode, the following three kinds of status, if indoor heat exchanger hasn't achieve

certain temperature that indoor fan motor will not start, in this way to prevent blowing cool

wind (within 3mins):

1.Heat operation just startedup. 2.After Auto defrosting operation is finished.

3.Heating under low temperature.

The climate type of this unit is according to the nameplate.

Notices for use

℃

⑴

⑹

⑶

⑵

⑸

⑷

⑺

⑼

⑹

⑸

⑵

⑻

⑼

⑷

⑺

⑶

⑻

Names and functions of each part

Indoor unit

Air in

Air out

Power cable

Front panel

Filter

Guide louver

Wall pipe

Bind tape

Connection wire

Drainage pipe

Remote control

Outdoor unit

Air in

Air out

遥控器各按键的名称及作用

５

Name and function of wireless remote control

ON/OFF button

Remote control

Signal transmitter

AUTO

COOL

DRY

FAN

(Only for cooling and heating unit.)

Don't drop or throw the remote control; Don't let any liquid in the remote control and

Note: Be sure that there are no obstructions between receiver and remote controller;

put the remote control directly under the sunlight or any place where is very hot.

●Press this button, Auto, Cool,Dry, Fan,

Heat mode can be selected circularly.

MODE button

MODE

Auto mode is default while power on.

Under Auto mode,the temperature will not

be displayed; Under Heat mode, the

●Press this button, Sleep On and Sleep

Off can be selected. After powered on,

SLEEP button

SLEEP

Sleep Off is defaulted. After the unit is

turned off, the Sleep function is canceled.

After Sleep function set up, the signal of

Sleep will display. In this mode, the time of

timer can be adjusted. Under Fan and Auto

modes, this function is not available.

●

Press this button, Auto, Low, Middle, High

speed can be circularly selected. After

FAN button

FAN

powered on,Auto fan speed is default.

Under Dehumidify mode, Low fan speed

only can be set up.

CLOCK button

CLOCK

●Press this button, can set up temperature:

presetting temperature (to display room),

TEMP button

TEMP

indoor ambient temperature (to display

indoor temperature), outdoor ambient

temperature (to display outdoor temperature),

and that will go around. It is defaulted that

Operation of wireless remote control

●Press this button, the unit will be turned on,

press it once more, the unit will be turned

off. When turning on or turning off the unit,

the Timer, Sleep function will be canceled,

HEAT

initial value is 28℃;Under other

modes, the initial value is 25℃ ．

（ｏＦ）

there is no signal displaying. Remark:when

operating this button,the wireless remote

control displays the presetting temperature

all along.

Middle fan

Low fan

High fan

but the presetting time is still remained.

●Press this button, the clock can be set up,

signal blink and display.Within 5

seconds, the value can be adjusted by

pressing + or - button, if continuously

press this button for 2 seconds above,

in every 0.5 seconds, the value on ten place

of Minute will be increased 1. During blinking,

repress the Clock button, signal will be

constantly displayed and it denotes

the setting succeeded. After powered on,

12:00 is defaulted to display and signal

will be displayed. If there is signal

time value is Clock value, otherwise is Timer

value.

be displayed that denotes the current

６

Remote control

●Press this button, can turn on or turn off

the drying.In Cool and Dehumidifying mode,

BLOW button

BLOW

this button,"BLOW" will be concealed, at

this time the Blow function is turned off.

After powered on, Blow OFF is defaulted.

When operating the ON/OFF button, or

switching mode to Cool or Dehumidifying

mode,the Blow function will keep the original

status. If unit is turned off, Blow OFF only

can be set up and send the signal. In Auto,

Fan as well as Heat mode, Blow function

can not be set up and there is no "BLOW"

displaying.

●In Cool or Heat mode, press this button

can turn on or turn off the Turbo function.

TURBO button

TURBO

After turned on the Turbo function, its

signal will be displayed. When switching

the mode or changing fan speed, this

function will be canceled automatically.

●Press this button at unit On or Off status,

Light On and Light Off can be set up.

LIGHT button

LIGHT

After powered on, Light On is defaulted.

+ button

●Presetting temperature can be decreased.

Press this button, the temperature can be

- button

set up, continuously press this button

and hold for two seconds, the relative

contents can quickly change, until unhold

this button and send the order that the ℃

（ｏＦ）signal will be displayed all the time.

The temperature adjustment is unav-

ailable under the Auto mode, but the order

can be sent by if pressing this button.

Names and functions of wireless remote control

Operation of wireless remote control

press this button and will display "BLOW",

at this time the Blow is turned on. If repress

●For presetting temperature increasing.

Press this button,can set up the temperature,

when unit is on. Continuously press and

hold this button for more than 2 seconds,

the corresponding contents will be

changed rapidly, until unpress the button

℃（℉）

laying all along. In Auto mode, the temp-

erature can not be set up, but operate this

button can send the signal. Centigrade

setting range :16-30; Fahrenheit scale

setting range 61-86.

then send the information, is disp-

with multifunction; For some function, which the model dosen't have, if press the

corresponding button on the remote controller that the unit will keep the original

running status.

Notice: This is a general use remote controller, it could be used for the air conditioners

７

TIMER ON TIMER ON BUTTON

TIMER OFF BUTTON

●Once press this key to enter into

TIMER OFF setup, in which case

the TIMER OFF icon will blink.

The method of setting is the same

TIMER OFF

as for TIMER ON.

●

Remote control

Name and function of wireless remote control

Operation of wireless remote control

HEALTH BUTTON

●

Press this button, can set up Health function

on or off. After unit is turned on, Health

function ON is defaulted.

I FEEL BUTTON

●Press this button, to turn on the I FEEL

function. When operating other function

and after signal was sent out, every 200ms

I FEEL

later, the I FEEL information will be sent

out. After I FEEL function turned on, in

every 10mins, the remote controller will

send the temperature information to main

controller. If repress this button, the I

FEEL function will be turned off.

AIR BUTTON

●Press this button, Air On or Air Off can

be selected.

●Press this button, to set up swing angle,

which circularly changes as below:

OFF

This is an universal use remote controller.

If remote controller sends the following

three kinds of status that the swing status

of main unit will be:

When the guide louver start to swing up and

down, if turn off the Swing, the air guide louver

will stop at current position.

which indicates the guide louver swings up

and down between that all five positions.

SWING UP and DOWN BUTTON

Timer On setting: Signal “ON” will blink

and display, signal will conceal, the

numerical section will become the timer

on setting status. During 5 seconds blink,

by pressing ＋or －button to adjust the

time value of numerical section, every

press of that button, the value will be

increased or decreased 1 minute. Hold

pressing ＋or －button, 2 seconds later,

it quickly change, the way of change is:

During the initial 2.5 seconds, ten numbers

change in the one place of minute, then

the one place is constant, ten numbers

change in the tens place of minute at 2.5

seconds speed and carry. During 5s blink,

press the Timer On button, the timer setting

succeeds. The Timer On has been set up,

repress the timer On button, the Timer On

will be canceled. Before setting the

Timer, please adjust the Clock to the

current actual time.

with multifunction; For some function, which the model dosen't have, if press the

corresponding button on the remote controller that the unit will keep the original

running status.

Notice: This is a general use remote controller, it could be used for the air conditioners

８

1. After powered on, press ON/OFF button, the unit will start to run.(Note: When

it is powered off, the guide louver of main unit will close automatically.)

2. Press MODE button, select desired running mode, or press COOL or HEAT

mode to enter into the corresponding operation directly.

3. Pressing +or - button, to set the desired temperature (It is unnecessary to

set the temp. at AUTO mode.)

4. Pressing FAN button, set fan speed, can select AUTO FAN, LOW, MID

and HIGH.

5. Pressing button, to select the swing.

1. Press SLEEP button, to set sleep.

2. Press TIMER ON and TIMER OFF button, can set the scheduled timer on

3. Press LIGHT button, to control the on and off of the displaying part of the

unit (This function may be not available for some units).

4. Press TURBO button, can realize the ON and OFF of TURBO function.

or timer off.

Guide for operation- general operation

Guide for operation- Optional operation

Operation of wireless remote control

★

This function indicates that moisture on evaporator of indoor unit will be blowed after the unit

About blow function

is stopped to avoid mould.

1. Having set blow function on: After turning off the unit by pressing ON/OFF button

indoor fan will continue running for about 10 min. at low speed. In this period,

press blow button to stop indoor fan directly.

2. Having set blow function off: After turning off the unit by pressing ON/OFF button,

the complete unit will be off directly.

Introduction for special function

When AUTO RUN mode is selected, the setting temperature will not be displayed on the

LCD, the unit will be in accordance with the room temp. automatically to select the suitable

running method and to make ambient comfortable.

About turbo function

If start this function, the unit will run at super-high fan speed to cool or heat quickly so that

the ambient temp. approachs the preset temp. as soon as possible.

★

About AUTO RUN

This manual suits for next models

Table of contents

Other INVENTOR Air Conditioner manuals

INVENTOR

INVENTOR V6MKI32-18WiFiR/U6MRS32-18 User manual

INVENTOR

INVENTOR O1MVI-09WFR/O1MVO-09 User manual

INVENTOR

INVENTOR C1VI-09 User manual

INVENTOR

INVENTOR V4MCRI-12 User manual

INVENTOR

INVENTOR AR1MVI32-09WiFiR User manual

INVENTOR

INVENTOR INV-Pdm224W/NaB-M User manual

INVENTOR

INVENTOR SUVO-09 User manual

INVENTOR

INVENTOR P9VO32-09 User manual

INVENTOR

INVENTOR DR2VI-09WFI User manual

INVENTOR

INVENTOR V4MCI-24UR User manual

INVENTOR

INVENTOR A2VI-09 User manual

INVENTOR

INVENTOR V3MCI-50 User manual

INVENTOR

INVENTOR RFI-30 User manual

INVENTOR

INVENTOR CLCO290-09BS User manual

INVENTOR

INVENTOR AR5VI-09WiFi User manual

INVENTOR

INVENTOR V2CI-12 User manual

INVENTOR

INVENTOR L2VO-09 User manual

INVENTOR

INVENTOR CRPVI32-09WFI User manual

INVENTOR

INVENTOR PR1VI32-09WF User manual

INVENTOR

INVENTOR DRVI32-09WF/DRVO32-09 User manual

INVENTOR

INVENTOR L4VO32-18 User manual

INVENTOR

INVENTOR V1CI-12 User manual

INVENTOR

INVENTOR C1VI-09 User manual

INVENTOR

INVENTOR Neo N2UVO-09 User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual