InterVision XPR-4004E User manual
4CH H.264
STANDALONE
DVR SYSTEM
USER MANUAL
2010 Apr. V1.0
ii
WARNING
¾Do not expose the DVR under the sunlight, heat or
wet environment while installation. As it could
decrease the performance of DVR and damage the
machine.
¾Do not touch the power plug or case with wet hands
as this could result electric shock.
¾Do not forcedly bend or put heavy object on power
cable as this could result in injury to personal or
equipment.
¾Do not operate with damaged power cord or loose
electrical outlet as this could result in electric shock or
accident.
¾Please use individual power instead of share electrical
outlets with other electrical equipment as this could
result in damage or accident.
¾Do not attempt to service this DVR by yourself as it
may expose you to dangerous voltage or other
hazards. Please refer all service to the qualified
servicing distributor.
¾Do not open the covers or insert any object into DVR.
CAUTION
¾Do not place the machine on an uneven surface or it would
decrease the DVR efficiency or malfunction.
¾Avoid any shock or bumping of the DVR while recording.
Improper handling could damage the system.
CAUTION
Make sure the voltage selector switch
(115V/230V) is set to appropriate setting
before plug in!
iii
CONTENTS
1. Specification...................................................................................1
2. Front Panel......................................................................................2
3. Installation.......................................................................................3
4. DVR Installation..............................................................................3
5. System Operation...........................................................................4
6. Display Setup..................................................................................6
7. Main Menu Setup............................................................................8
7.1 Search........................................................................................9
7.2 Record Setup ..........................................................................10
7.3 HDD Setup...............................................................................11
7.4 Basic Setup.............................................................................12
7.4.1 Language.......................................................................13
7.4.2 Time Setup.....................................................................13
7.4.3 Password Setup............................................................13
7.4.4 Camera Setup................................................................14
7.4.5 XGA/Audio Setup..........................................................15
7.5 Advance Setup........................................................................15
7.5.1 Alarm Setup...................................................................15
7.5.2 System Information ......................................................16
7.5.3 Motion Detection...........................................................18
7.5.4 PTZ Setup ......................................................................19
7.5.5 Network Setup...............................................................20
8. Other Function..............................................................................21
9. Cell Phone Monitoring Operation ...............................................21
10. H264Player Operation..................................................................24
11. Web Operation..............................................................................26
12. Default Setting..............................................................................33
13. HDD Support List..........................................................................34
14. USB Flash Memory Stick Support List.......................................35
1
1. Specification
Video Format NTSC PAL
Video Input 4 CH Input / BNC
Audio Input 4CHInput/RCA
Video Output 1CH Output / BNC
Audio Output 1CH Output / RCA
XGA Output 640x480、800x600、1024x768、1280x1024、1440x900
Alarm Input 4CH Alarm In
Alarm Output Buzzer，2 x Relay Out (N.O、N.C)
Display Mode Full Screen, 4CH Split Screen,Auto Switch
Display Resolution 720 x 480 720 x 576
Highest 720 x 480 720 x 576
High 720 x 240 720 x 288
Recording
Resolution Normal 360 x 240 360 x 288
Recording Frame Max. 120 FPS Max. 100 FPS
Compression Algorithm H.264
Operating System Embedded Linux
Pentaplex Live / Record / Playback / Network / Mobile Phone
Recording Mode Manual, Schedule, Event
Schedule Recording Full Recording, Motion, Alarm, Manual Recording
Status Indicator Power, Recorder, Play
Alarm Trigger, Motion Trigger, Video Loss
Event Mode Recording Duration: 10~60 sec.
Normal Speed: x1
Fast Forward: x2 / x4 / x8 / x16multiple speed
Slow Forward: 1/2、1/4、1/8 multiple speed
Fast Rewind: x2 / x4 / x8 / x16
Frame by Frame Playback: Forward
Playback Mode
Search Function: Time / Event
Network Protocol TCP/IP / PPPoE / DHCP / SMTP / DDNS
HDD Type SATA 3.5”HDD x 1 (No HDD Included)
HDD Management Automatic Format System
PTZ Control Communication Protocol (PELCO P, PELCO D, MIKAMI)
Backup Device USB 2.0 Flash Memory Stick
Firmware Update Host USB
Multi-Language English / Chinese / Others
Control Mode Front Panel / Remote Control / USB Mouse / Internet
Network Control IE Browser
Network Function Live Display / Playback / PTZ Control / System Setup
Power Supply DC 12V / 3A(AC100V~240V 50/60HZ)
Unit Dimension 220mm (D)x 228mm (W) x 48 (H) mm
Weight Unit Weight 1.6kg ( HDD and Power Adapter Not Included )
Operating Temperature 0℃~ 46℃
2
2. Front Panel
MENU Under the live viewing mode, press MENU to enter the main menu.
Under the menu mode, press MENU to go to the upper menu.
Manual Record/
STOP
Press this button to start recording in live mode.
Under the playback mode, press the button to stop the operation or
go to upper menu.
Step / Pause
Under the playback mode, press Step button to enter Play Frame by
Frame mode. Under the playback mode, press the button to pause
the playback.
Play Under the live viewing mode, press the Play button to enter the
playback mode.
Slow Forward Slow Forward speed: 1/2、1/4、1/8
Quad Quad screen display.
1 Channel 1 Under the live viewing mode or playback mode,channel 1 display.
2 Channel 2 Under the live viewing mode or playback mode,channel 2 display.
3 Channel 3 Under the live viewing mode or playback mode,channel 3 display.
4 Channel 4 Under the live viewing mode or playback mode,channel 4 display.
Power Indicator The LED lights on when power on.
Record Indicator The LED lights on when the DVR is recording.
Play Indicator The LED lights on when the DVR is playing.
Up
Down To move up or down of the selection setting in the menu
Left
Fast Rewind
To move left of the selection setting in menu.
Playback: x2 / x4 / x8 / x16 Multiple Speed.
Right
Fast Forward
To move right of the selection setting in menu.
Playback: x2 / x4 / x8 / x16 Multiple Speed.
Enter Press the Enter button to confirm the setup or go into sub-menu.
3
3. Installation
1 USB Mouse Port 1.1 USB Mouse
2 VIDEO IN 4CH Video Input (BNC)
3 VIDEO OUT 1CH Video Output (BNC)
4 AUDIO OUT 1CH Audio Output (RCA)
5 AUDIO IN 4CH Audio Input
6 USB 2.0 Port USB Backup or Firmware Update
7 ALARM, Alarm I/O
8 DC12V Power Input
9 XGA PC Monitor Output
10 LAN RJ-45 Network Connection
11 RS-485 For Speed Dome Use
zAlarm I/O
Item
Point 1: CH1 sensor input.
Point 2: CH2 sensor input.
Point 3: CH3 sensor input.
Point 4: CH4 sensor input.
Point 5: ground.
Point 6: the first relay joint port.
Point 7: the first relay normal open.
Point 8: the second relay joint port.
Point 9: the second relay normal open.
4.DVR Installation
zConnect the camera video output to the DVR video input port
with BNC connectors.
The camera install coaxial cable is suggested cat 6 or above.
4
zDVR Network installation
Please connect DVR to HUB or router by using RJ-45 network cable and
make sure the DVR network indicator LED is on.
(Please refer to 7.5.5 Network Setup for further network setting information
of using static IP, PPPoE or DHCP.
zAlarm Installation
Please refer to 3. Installation for external alarm I/O installation.
Plase refer to 7.5.1 Alarm Setup.
zSpeed Dome Installation
This device can support 3 kinds of communication protocol ( Pelco D、Pelco
P & MIKAMI)
zPower Installation
Please use the provided power cable and adaptor to connect the DVR
(AC100V~AC230V). Please refer to 3. Installation for connecting position.
The DVR system will enter into live viewing mode when power is connected.
Please refer to 6. Display Setup - Live Viewing Mode for more information.
5. System Operation
There are 3 kinds of DVR control method: front panel, remote control and USB
mouse.
zUSB Mouse Operation
¾Quick Menu: Right click the mouse button under the live viewing mode
to go for enter into Quick Menu.
¾Left click the mouse button under the main menu to go to the sub-select
menu.
¾Left click the mouse button under the select menu to go to the
sub-menu.
¾Use the mouse to change the setting.
¾Please refer to 6. Display Setup - PTZ Setup.
zRemote Control Operation
¾Remote Control and front panel operation are the same; please refer to
2. Front Panel and the reference table of the button as below.
¾
5
zVirtual Keyboard Operation
The text input of the virtual keyboard is as below:
Menu Operation Front Panel & Remote
Control Operation Mouse Operation
Select character from virtual keyboard [Up/Down/Left/Right] [Move Cursor]
Keyin the select character [Enter] [Left Click]
Exit the virtual keyboard [MENU] [Left Click]out of selection area
Key Description of Virtual Keyboard
Delete the previous character
Switch to text input
Enter key. Save and exit the virtual keyboard
Other Keys Character Keyin
zMain Menu Operation
Setup Operation Front Panel & Remote Control USB Mouse
Select [Up/Down/Left/Right] [Moving Cursor]
Enter Select Menu [Enter] [Left Click]
Return to Upper Menu [MENU] [Exit]
zSetup Operation
6
Setup Operation Front Panel & Remote Control USB Mouse
Select [Up/Down/Left/Right] [Moving Cursor]
Confirm Select Setting [Enter] [Left Click]
Change the Select Setting [Left/Right] [Left Click]
Return to Upper Menu [MENU] [Exit]
Default
Set back to default setting
Exit
Return to upper menu
6. Display Setup
There are 3 kinds of screen display mode: Live, Auto Switching and PTZ. DVR.
zLive Viewing Mode
The DVR will go to the live viewing mode after bootup.
There are 5 different status icon: ●、M、L、A、 『Record』、『Motion
Triggered』、『Video Loss』、『Alarm Triggered』、『Sound on/off』。
Setup Operation Front Panel&Remote Control USB Mouse
Channel 1~4 Single Channel
Display [CH1~4] Select one of channel
[Double click left button]
4 Channel Split Display [4 CH Split] Under single channel
[Double click left button]
Quick Menu [MENU] [Right]
Playback Mode [Play]
Start/Stop the Manual Record [Record]
Start/Stop the Auto Switching
Front Panel
[Auto Switch]
Remote Control
[Auto Switch]
Start/Stop Mute Remote Control
[Mute]
7
zQuick Menu
Setup Operation Front Panel & Remote Control USB Mouse
Select Item [Up/Down] [Moving Cursor]
Enter the Select Item [Right] [Moving Cursor]
Confirm the Select Item [Enter] [Left Click]
Exit [MENU] [Left Click]out of selection area
zPTZ
Please set the speed dome properly before control PTZ. Please refer to
7.5.4 PTZ Setup.
Setup Operation Front Panel & Remote Control USB Mouse
Select Item [Up/Down/Left/Right] [Moving Cursor]
Enter Select Item [Enter] [Left Click]
Zoom +,-
Focus, +-
Iris, +-
Adjust Movment Speed
PTZ Upward
PTZ downward
PTZ Left
PTZ Right
Start/Stop Auto Tracking
Exit [MENU] Right Click
Table of contents
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual