2.3. Connecting the innoTronics
Wireless Adapter to the TV and
simultaneously to two Bluetooth®
devices (for example earphones)
1. Make sure that the innoTronics Wireless
Adapter is charged.
2. Set the innoTronics Wireless Adapter to
RX mode and turn on the device. The LED
should flash red-blue.
After that, turn off the device (press the power
button for 4 seconds)
3. Connect the innoTronics Wireless Adap-
ter to your TV via an optical cable or a 3.5 mm
AUX cable.
3.1. If you are connecting via an optical
cable, on the TV, plug the cable into the (optical
digital audio) and into the SPDIF IN of the
innoTronics Wireless Adapter.
Set the switch to SPDIF mode.
We recommend that you open the audio
settings menu on your TV and adjust the sound.
And also, if it is necessary to enable SPDIF
mode.
3.2. If you connect via an AUX cable, plug the
cable into the headphone jack on the TV and
into the AUX of the innoTronics Wireless Ada-
pter. Set the switch to AUX mode.
4. Place the innoTronics Wireless Adapter at a
distance of 3 feet/1 meter from your Bluetooth®
receiver, such as earpho-nes or a Bluetooth®
speaker.
5. Turn on Bluetooth® on device 1(for example,
Bluetooth® earphones 1) and set it to pairing
mode, after 1 second turn on the innoTronics
Wireless Adapter (press the power
button for 4 seconds), the devices must be
connected within 40 seconds. If automatic
connection does not occur, then turn off both
devices and repeat. If the automatic connec-
tion does not occur, then set the pairing mode
on device 1 (for example Bluetooth® earphones
1) and set the pairing mode to the innoTronics
09/10
