In the steaming and frying function, food is cooked by using a combination of high-temperature steam and rapid speed air frying. The food cooked retains the "freshness" of steaming and the "crispy" of frying which can meet various cooking needs. Depends on the kind of food ingredients, different temperature and times can be set in DIY mode. Instructions for the steaming and frying function1. Add distilled water to the water tank: The function of steaming and frying also needs to use water. Please refer to the instructions for adding water in pure steaming mode section.2. Put in the food: Carefully open the oven door then put the preserved food into the baking net, push the baking net into the steaming and frying chamber then close the oven door.Caution: Please place the product on a smooth surface. Do not place the product on a heat-resistant surface. 3. Setting Functions:A) Switch on the power and the oven enters the standby state. Click“ ”to enter the setting state.B) Click the“ ”button, and the“ ”icon begins to blink and the setting state of steaming and frying combination mode is entered.C) At this time, 100 is displayed on the screen to set the steaming time. Click in the time adjustment zone to set the time of the steaming function.Tips: In the process of steaming and frying, the default setting is steaming first and then baking.4. Cooking is over: there will be 5 long deep sounds. Pull the oven door open and use oven gloves to pull the baking tray or grill net out. Make sure the food is properly cooked. If it is not, put the food back to the oven with the baking tray or grill net and continue to heat for a few more minutes.Note: The cooking process has just completed, the internal of the oven is still at a high temperature, please do not touch directly the internal of the air fryer or cooked food directly. To remove food by using tongs or oven gloves.Tips: After cooking process, excess oil or juice from the food will be collected in the drip tray at the bottom of the product. Please pay attention while cleaning.Tips: After the oven is not operated in the setting state for a long time and the cooking is over, the oven will enter standby mode. Click“ ”to start up the oven if necessary.Use of Pre-sets functionCake, french fries, roast, steamed egg, steamed vegetables, steamed fish, doughnuts, steak, steamed, roast chicken, etc., are available as pre-set cooking options. The touch display menu is divided into three zones respectively. You can use the air fryer menu, pure steam menu and the combination of air fryer + steam menu. This allows you to choose how you would like to cook the meals perfectly. Below are the steps: 1. Clean and preserved the ingredients, place the food on the suitable accessory provided with the air fryer, place it in the oven and close the door. 2. Setting Functions:A) Switch on the power and the oven enters the standby state. Click“ ”to enter the setting state.B) Click the corresponding menu icon in pre-sets mode.
