Ingersoll-Rand ARO 67442 User manual

OPERATOR’S MANUAL 67442

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 4-13-10

REVISED: 9-25-20

(REV: C)

SELF-RELIEVING BALL VALVE REGULATOR

THIS ACCESSORY IS USED WITH THE FOLLOWING AIR MOTORS

AF04XX-01, AF06XX-01, AF08XX-01, AF10XX-01 and AF12XX-01

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

INGERSOLL RAND COMPANY INC

209 NORTH MAIN STREET – BRYAN, OHIO 43506

arozone.com

GENERAL DESCRIPTION

ARO regulators provide controlled, consistent air pressure

required for the operation of a pneumatic actuated motor and

any coupled system. The integrated ball valve enables the op-

erator to easily throttle the motor/system from an o position

to the preset desired regulator pressure. In turn the operator

can also throttle from a full run position to an off condition

and control the positioning of the motor/system. The ball

valve also enables the operator to safely depressurize the mo-

tor/system without disconnecting the supply air line

REGULATOR DATA

Model. ........................67442

Air Inlet Port ................. 1/2 - 14 NPT

Maximum Air Inlet Pressure .... Refer to Air Inlet PMAX

found on model plate of pump/ air motor

Operating Temprature Range. . .

23F to 175F (-5 C to 79C)

Maximum Air Flow.............

215 SCFM (101 dm3/s)

Figure 1

Page 2 of 4 67442 (en)

CAUTION

High pressure equipment – Always

disconnect air supply and relieve material pressure

before attempting to service.

Ball Valve

1. Move the (8) control handle counterclockwise to pres-

surize the system. A 90 degree movement would be the

“o” position. A 90 – 180 degree movement would allow

the system to be throttled to full regulated line pressure

(180 degree counterclockwise position being the “on”

position) .

2. Move the (8) control handle clockwise to either stop

the system or to de-pressurize the system. A 90 degree

movement would return to the “off” position. A 90 –

180 degree movement would allow the system to be

de-pressurized and vent the residual system pressure

through the (6) vent nut and dump to atmosphere (180

degree clockwise position being “vent” position).

OPERATING AND SAFETY PRECAUTIONS

INSTALLATION

1. Install the 67442 self- relieving ball valve regulator us-

ing the three (11) bolts passing through the (1) regulator

housing. Be certain that the (26) O-ring is in the recess

groove on the mounting side of the (1) regulator hous-

ing to establish the pneumatic seal. Tighten all (11) bolts

evenly to 50-60 in-lbs (13.6-20.3 Nm)

2. The (39) adjustment knob should be turned counter-

clockwise until compression is released from the pressure

control spring. This prevents over pressurizing the air op-

erated equipment when the air supply is turned on .

3. The (8) ball valve control handle should be turned clock-

wise until it stops. This will be in the de-pressurize / vent

position of the control handle. The (8) handle position is

adjustabe to eight dierent locations and can be adjust-

ed by removing the (10) button head screw, (9) washer,

and (8) control handle and oriented as desired. The (7)

key should not be removed. The (7) key establishes the

on/ o /vent orientation of the ball valve.

4. Connect piping to Air inlet port using pipe thread seal-

ant on male threads only. Do not allow sealant to enter

interior of regulator.

5. Air line piping should be the same size as regulator

ports.

OPERATION

Regulator

1. Pull (39) knob to adjust air pressure.

2. Turn clockwise to increase air pressure.

3. Turn counterclockwise to decrease air pressure.

4. Push (39) knob to lock.

PARTS AND MAINTENANCE

When the life of the product has expired, it is recommended

that the product be disassembled, degreased and parts

separated by material so that they can be recycled.

The original language of this manual is English.

Refer all communications to the nearest Ingersoll Rand

Oce or Distributor.

67442 (en) Page 3 of 4

Item Description (size) Qty Part No. Mtl

1 Housing (1) 96919 [A]

2 Seat O-Ring (3/32” X 1 1/4” OD) (2) Y325-121 [B]

3Seat (2) 96925 [D]

4 Ball (1) 96926 [SS]

5 Vent Nut O-Ring (1/16” X 1-5/16” OD) (1) Y325-25 [B]

6 Vent Nut (1) 96924 [Br]

7Key (1) 96921 [S]

8 Handle (1) 96920 [A]

9 Washer (1) Y13-4-C [S]

10 Button Head Screw (1/4”-20 X 3/8”) (1) Y211-142 [S]

11 Socket Head Screw (5/16”-18 X 3-1/4”) (3) Y99-511 [S]

12 Cover Ring (1) ----- [Ny]

13 Gauge Cover (1) ----- [PC]

14 Screw (2) ----- [S]

15 Gauge Assembly (0 - 140 psig) (1) 104334 [Ny/S]

16 Gauge O-Ring (1) ----- [B]

17 Valve (1) ----- [Ny]

18 Valve O-Ring (1) ----- [B]

19 Valve Spring (1) ----- [SS]

20 Valve Guide O-Ring (1) ----- [B]

PARTS LIST / 67442

Item Description (size) Qty Part No. Mtl

21 Valve Guide (1) ----- [Ny]

22 Pipe Plug (1/4”-18 NPT) (1) Y17-51-S [S]

23 Valve Stem Washer (1) 96923 [D]

24 Valve Stem O-Ring (1) Y325-110 [B]

25 Valve Stem (1) 96922 [Br]

26 Outlet Port O-Ring (3/32” X 1-1/4” OD) (1) Y325-121 [B]

27 Stem O-Ring (1) ----- [B]

28 Stem (1) ----- [Ny]

29 Static Pressure Tube (1) ----- [D]

30 Relief Valve Seat (1) ----- [B]

31 Relief Valve (1) ----- [Ny]

32 Diaphragm (1) ----- [Ny/B]

33 Diaphragm Washer (1) ----- [Ny]

34 Diaphragm Retaining Washer (1) ----- [D]

35 Spring (5-125 psig) (1) 104331 [S]

36 Adjustment Nut (1) ----- [S]

37 Adjustment Bolt (1) ----- [S]

38 Bonnet (1) ----- [Ny]

39 Knob (1) ----- [D]

MATERIAL CODE

[A] = Aluminium

[B] = Nitrile

[Br] = Brass

[D] = Acetal

[Ny] = Nylon

[PC] = Polycarbonate

[S] = Steel

[SS] = Stainless Steel

Page 4 of 4 67442 (en)

PN 97999 - 1529

PARTS LIST / 67442

12 13 14

11 10

987

15 16

Figure 2

Other Ingersoll-Rand Controllers manuals

Ingersoll-Rand

Ingersoll-Rand TS900 Series Setup guide

Ingersoll-Rand

Ingersoll-Rand ESCB20 User manual

Ingersoll-Rand

Ingersoll-Rand SS100 Series Setup guide

Ingersoll-Rand

Ingersoll-Rand EC24N User manual

Ingersoll-Rand

Ingersoll-Rand ARO 6744 Series User manual

Ingersoll-Rand

Ingersoll-Rand INSIGHTqcx User manual

Ingersoll-Rand

Ingersoll-Rand Intellisys Remote Interface User manual

Ingersoll-Rand

Ingersoll-Rand ST150 Series Setup guide

Ingersoll-Rand

Ingersoll-Rand ReliaTel User manual

Ingersoll-Rand

Ingersoll-Rand Xe-50 User manual

Ingersoll-Rand

Ingersoll-Rand X4I User manual

Ingersoll-Rand

Ingersoll-Rand Nirvana SGNe V2.5 User manual

Ingersoll-Rand

Ingersoll-Rand ST600-13-31 Setup guide

Ingersoll-Rand

Ingersoll-Rand ST400 Series Setup guide

Ingersoll-Rand

Ingersoll-Rand EC34ES-1 User manual

Ingersoll-Rand

Ingersoll-Rand SS175 Series Setup guide

Ingersoll-Rand

Ingersoll-Rand ARO 651763-AM-2 User manual

Ingersoll-Rand

Ingersoll-Rand X4I Specification sheet

Ingersoll-Rand

Ingersoll-Rand Insight IC Series User manual

Ingersoll-Rand

Ingersoll-Rand EC24N User manual

Ingersoll-Rand

Ingersoll-Rand X8I User manual

Ingersoll-Rand

Ingersoll-Rand INSIGHTqc Reference guide

Ingersoll-Rand

Ingersoll-Rand EC24E User manual

Ingersoll-Rand

Ingersoll-Rand 150BMG Series Setup guide

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual