infobit iTrans DX2-T-22 User manual
iTrans DX2-T-22
Dante 2CH Analog
Input Dongle
All Rights Reserved
Version: iTrans DX2-T-22_2022V1.0
Product Introduction
Thanks for choosing the iTrans
DX2-T-22. It connects to your Dante
network and supports Analog 2X0
channels audio, allowing receive
analog audio signal, convert the
analog signal to digital signal and
transmit through Dante network.
Features
Plug and Play
24-bit audio support
2X0 audio channels
Supports 802.3af PoE
Packing List
1x iTrans DX2-T-22
1x User Manual
Note: Please contact your distributor
immediately if any damage or defect in the
components is found.
Panel Description
1RJ45: Dante network
communication port. Green
steady light indicates system
ready; yellow flashing light
indicates link/data traffic. The
green light will flash to identify
the device when clicking the
Dante Controller “Identify” button
(an eye-shaped symbol) on the
host computer.
2XLR: 2 x XLR male, connect
input devices
Technical Specification
Audio
Max signal
level
+24 dBu/+4
dBu/0 dBu
0 dBV/-10 dBV
Frequency
Response
20Hz to
20kHz(-/+0.5dB
)
Impedance
20k Ohm
balanced
10k Ohm
unbalanced
Dynamic
Range
>100 dB
Signal to
Noise Ratio
>100 dB
THD
<0.01% @+4
dBu
Dante
Sample Rate
44.1kHz,
48kHz, 96kHz
Bit Depth
24
Dante Device
Latency
1,2 or 5ms
(configurable
using Dante
Controller)
Model Name
Analog 2X0
General
Operation
Temperature
-5 to +55℃
(+23° to
+131°F)
Storage
Temperature
-25 to +70℃
(-13° to
+158°F)
Power
802.3af PoE
Power
Consumption
3.15W(Max)
Dimension
(W*H*D)
30 x 28 x 114
mm
Cable length
300mm
Net Weight
145g
WWW.INFOBITAV.COM
INFO@INFOBITAV.COM
Other infobit Adapter manuals
