IKEA ENEBY Series User manual
ENEBY
ENGLISH
中文
繁中
한국어
日本語
BAHASA INDONESIA
BAHASA MALAYSIA
3
9
15
21
27
33
39
45
51
TABLE OF CONTENTS
ENEBY 20/30 overview ............................................ 4
Getting started ...................................................... 5
Add Bluetooth device .............................................. 5
Play music from external source .............................. 5
Use speaker throughout home ................................. 5
Attach speaker to a wall or a stand ........................... 5
Other Settings ....................................................... 5
Safety and important notice .................................... 6
Care Instructions ................................................... 6
Troubleshooting ..................................................... 7
Technical data ........................................................ 8
ENGLISH 3
4
1. Power On/Off/Volume control
2. AC IN
3. AUDIO IN
4. For ENEBY wall mount and ENEBY
Stand (sold separately)
5. Battery compartment lid (only on
ENEBY 20, sold separately)
4
3
2
1
5
1
TYPE E1720
:
Wireless speaker ENEBY 20
Input:100-240V~50/60Hz
19972
BC
19972
BC
TYPE E1730
:
Wireless speaker ENEBY 30
Input:100-240V~50/60Hz
4
3
2
TYPE E1720 - ENEBY 20
TYPE E1730 - ENEBY 30
ENEBY 20 (E1720)
ENEBY 30 (E1730)
Getting started:
1. Connect mains cord into AC In (2)
connector.
2. A quick press on the knob (1) turn the
speaker On. ENEBY 20/30 starts to
search for paired devices. If a paired
device is found, the LED shines without
blinking and your speaker is ready to
use.
3. If no device is found the speaker LED
continues to blink and enters pairing
mode automatically. Go to the Bluetooth
settings in your mobile device and
connect to ENEBY 20/30. The LED should
now stop blinking and your speaker is
ready to use.
If no music has been playing for 20min,
the speaker will enter sleep mode.
Adjust Volume
Turn the knob (1) left to decrease or turn it
right to increase volume level.
Add additional Bluetooth device(s)
(max 8 devices)
1. Make sure no other device is paired and
in range to the speaker.
2. Go to your Bluetooth menu on your
mobile device and connect to ENEBY
20/30.
3. Once Bluetooth connection is
established, the white LED stops
blinking.
Unpair Bluetooth device
Go to your Bluetooth menu on your mobile
device and unpair ENEBY 20/30 from your
devices.
Play music from external source:
Connect a portable audio device to the
AUDIO IN (3) jack on the rear panel. The
speaker automatically detects the external
input and disables Bluetooth functionality.
Use a 3.5mm 3-pol Audio cable for this
feature.
Use speaker throughout home:
ENEBY 20 has the possibility to be portable.
ENEBY battery pack is sold separately.
— To insert the battery, open the
compartment lid (5) and insert the
battery in the correct direction.
— The battery is charging in the product
when mains cord is connected and the
speaker is turned on.
— When battery is low a red LED in the
knob (1) will ash. During charging the
red LED is on.
Attach Speaker to a wall or a stand:
ENEBY wall mount and ENEBY stand are
accessories and are sold separately.
Use holes (4) and included screws to mount
stand or wall mount. Do not over tighten
the screws.
5
Other settings:
Bass Control:
Treble Control:
Press knob (1) for 3 sec. LED ash slowly. This enters the bass
level control. Turn left/right to adjust. Conrm setting by pressing
knob one time. LED ash quickly.
Turn left/right to adjust treble and conrm by pressing the knob
one time and exit sound settings.
Factory reset:: Press the knob (1) for 10sec. This deletes paired Bluetooth
devices from the settings and restores default sound settings.
Safety and important notice
WARNING:
— Risk of overheating! Never install the
product in a conned space. Always
leave a space of at least 5 mm around
the product for ventilation. Ensure
curtains or other objects never cover
the ventilation slots on the product.
— Never place the product or batteries
near open ames or other heat sources,
including direct sunlight.
— Only use this product indoors. The
apparatus shall not be exposed to
dripping or splashing, no objects lled
with liquids, such as vases, shall be
placed on the apparatus.
— Never place this product on other
electrical equipment.
— The mains plug or an appliance coupler
is to be used as a disconnect device, the
disconnect device shall remain readily
operable.
— If the supply cord is damaged, replace
it with a new cord set which is type-
approved for your country.
— Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, re or
similar.
IMPORTANT!
— The speaker is for indoor use only and
can be used in temperatures ranging
from 0º C to 45º C.
— Do not leave the speaker in direct
sunlight or near any heat source, as it
may overheat.
— Do not subject the speaker to wet, moist
or excessively dusty environments, as
this may cause damage.
— The range between the speaker and the
receiver is measured in open air.
— Different building materials and
placement of the units can affect the
wireless connectivity range.
— Too high volume can damage your
hearing.
— Do not touch the acoustic components.
— Don not use the product as a shelf or
stand.
CARE INSTRUCTIONS
To clean the speaker, wipe with a moist
cloth. Never submerge the speaker in
water.
NOTE!
Never use abrasive cleaners or chemical
solvents as this can damage the product.
Product servicing
Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points or other risks.
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 ÄLMHULT
The Bluetooth word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
IKEA is under license. Other trademarks and
trade names are those of their respective
owners.
The crossed-out wheeled bin symbol
indicates that the item should be disposed
of separately from household waste. The
item should be handed in for recycling
in accordance with local environmental
regulations for waste disposal. By
separating a marked item from household
waste, you will help reduce the volume of
waste sent to incinerators or land-ll and
minimize any potential negative impact on
human health and the environment. For
more information, please contact your IKEA
store.
6
Troubleshooting
7
Problem Tip
Cannot use Bluetooth: Make sure 3.5mm connector is not plugged into AUDIO IN
jack on rear panel.
Make sure your phone, tablet or other media device supports
Bluetooth.
Make sure to connect to the IKEA device called ENEBY 20/30
Make sure your phone, tablet or other media device is paired
and that its Bluetooth is turned on.
Make sure no other Bluetooth devices in the room are paired.
If so, turn off the Bluetooth function in that device.
Poor sound quality when
playing via Bluetooth: If Bluetooth reception is poor, move the device closer to the
speaker or remove any obstacles between the device and the
speaker.
Note: Bluetooth reception will normally operate at a distance
of up to 6-8m in conditions with an unobstructed path. When
objects, furniture or walls are in between, Bluetooth reception
will be reduced. When the device is placed in pockets of
clothes or in a bag, Bluetooth reception can be reduced.
Poor sound quality when
playing via AUDIO IN
input:
Make sure your phone, table or other media device is not at
maximum volume, if so, turn down the volume
Technical data
8
Model Name ENEBY 20 ENEBY 30
Type number E1720 E1730
Input 100-240VAC 50-60Hz
Standby Power Consumption <0.5 W
Rated Power Consumption 39W 40W
Operating temperatures 0°C to 45°C
Operating humidity 0 to 95%RH
Dimensions (mm) 199x199x80
(without handle) 299x299x106
Weight 1.5kg
(without battery) 3.8kg
Audio In 3.5mm jack
Audio In Input sensitivity 1.65V max
Battery playtime at 50% volume 8-10 Hours N/A
Auto Standby 20 min
Speaker type mixed mono
Woofer 1 x 3.2" 2 x 4"
Soft dome tweeter 1 x 1"
Amplier output power 1x15W + 1x5W 2x15W + 1x12W
Frequency range 57 - 20 kHz 48 - 20 kHz
Bluetooth Version V 4.2
Wireless range in open air 8-10 m
Operating frequency 2.4 - 2.48 GHz
Radio output power 4 dBm 9 dBm
中文 9
目录
ENEBY 20/30简述................................................................................. 10
开始 .......................................................................................................... 11
添加蓝牙设备.......................................................................................... 11
播放来自外部来源的音乐..................................................................... 11
在家中使用扬声器 ................................................................................. 11
将扬声器安装在墙壁或支架上............................................................. 11
其他设置.................................................................................................. 11
安全和注意事项 ..................................................................................... 12
保养说明.................................................................................................. 12
故障排除.................................................................................................. 13
技术数据.................................................................................................. 14
10
1.电源开关/音量控制
2.电源输入
3.音频输入
4.用于ENEBY壁挂架和ENEBY支架（须另购）
5.电池盖（仅用于ENEBY 20,须另购）
4
3
2
1
5
1
TYPE E1720
:
Wireless speaker ENEBY 20
Input:100-240V~50/60Hz
19972
BC
19972
BC
TYPE E1730
:
Wireless speaker ENEBY 30
Input:100-240V~50/60Hz
4
3
2
TYPE E1720 - ENEBY 20
TYPE E1730 - ENEBY 30
ENEBY 20 (E1720)
ENEBY 30 (E1730)
This manual suits for next models
4
Table of contents
Languages:
Other IKEA Speakers manuals
