IKEA VARMFRONT User manual
VARMFRONT
1
2
3
4
Max 300 mm
(max 1')
6
English
Functions
1. POWER button
2. LED indicators
3. USB-C (charging and supply power)
4. USB-A (only supply power)
Charging power bank
• Connect the USB-C cable to the USB-C
port of the power bank rst and then
connect the USB cable to a USB-charger
or USB-outlet that can provide sucient
power to charge the power bank. The
LED indicators will display the charging
status.
Supply power to devices
• Connect the USB cable to USB-C or
USB-A port of the power bank rst and
then connect the USB-cable to your
device that you want to charge.
7
• The power bank will detect a connected
device and start charging automatically.
• The LED indicators will display the
remaining charge in the power bank
during discharging.
Check power status
• Click once on the POWER button and the
LED indicators will light up and indicate
the remaining power status.
• If the USB cable is not disconnected
while the charging process nishes, push
the POWER button rst to restart the
charging.
Small current supply mode
• Press the POWER button for 8 seconds
when your device is being charged.
• The function is mainly used to charge
certain wearable electronic devices.
8
When charging a device that needs
a charging current less than 100mA
via a USB-A port, this mode should be
activated. You can press the button
for 3 seconds to exit this mode, it also
automatically closes after 2 hours.
Good to know
• USB cable length and quality inuences
charging speed and performance.
• Devices may get warm during charging;
this is completely normal and they will
gradually cool down again after they are
fully charged.
• Charging time may vary based on
the device’s battery capacity, charge
level, the age of the battery and the
temperature in the surrounding area.
• Storage temperature: -10°C to 25°C
(14 °F to 77 °F ).
• Power bank operating temperature:
0°C to 40°C (32 °F to 104 °F ).
9
• Unplug the power bank from the power
source before cleaning and when it is not
in use.
• Power bank should not be left
discharged for a longer period.
• Power bank should not be charged while
in contact with ammable materials like
textiles.
WARNING
• Do not modify, disassemble, open, drop,
crush, puncture or shred product.
• Only use in dry locations.
• Risk of res and burns. Do not open,
crush, heat above 140°F (60°C) or
incinerate.
• Do not subject the product to wet, moist
or excessively dusty environments since
this can cause damage to the unit.
• Keep the product away from open ames
or sunlight to prevent heat buildup.
10
• Keep the product away from high
voltage devices.
• Children should be supervised to ensure
they do not play with the product.
• Do not short-circuit the product or its
cells.
• In the event of a cell leaking, do not allow
the liquid to come in contact with the
skin or eyes.
Product servicing
Do not attempt to repair this product
yourself. If you open or remove parts, you
may expose yourself to dangerous voltage
points or other risks.
Care instruction
To clean the unit, wipe with a soft cloth
moistened with a little mild detergent. Use
another soft dry cloth to wipe dry.
Other manuals for VARMFRONT
4
This manual suits for next models
1
Table of contents
Languages:
Other IKEA Accessories manuals
IKEA
IKEA VARMFRONT User manual
IKEA
IKEA VINDRIKTNING User manual
IKEA
IKEA TRADFRI E1702 User manual
IKEA
IKEA tradfri User manual
IKEA
IKEA VINDRIKTNING User manual
IKEA
IKEA BRILJERA User manual
IKEA
IKEA ASKSTORM User manual
IKEA
IKEA KOPPLA 60412017 User manual
IKEA
IKEA INTENSITET User manual
IKEA
IKEA E2112 User manual
